User manual

To light the burner:
1. Turn the control knob counterclockwise to the maximum position (
) and push it
down.
2. Keep the control knob pushed for approximately 5 seconds; this will let thermocouple
to warm up. If not, the gas supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct
positions.
Each control knob has a pilot light. It lights up when you turn the control knob.
1
2
3
1 Burner cap and crown
2 Thermocouple
3 Ignition candle
Operation
13