HK634150XB EN MIXED HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 9 12 13 14 15 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions • • • • 5 Do not let cookware boil dry to prevent the damage to cookware and glass . Do not use the cooking zones with empty cookware or without cookware. Do not put the aluminium foil on the appliance. Make sure that the airflow space of 5 mm between the worktop and front of the unit below it stays opened. WARNING! If there is a crack on the surface, disconnect power supply to prevent the electrical shock.
Installation instructions WARNING! Risk of injury from electrical current. Carefully obey the instructions for electrical connections. • • • • • • • The electrical mains terminal is live. Make electrical mains terminal free of voltage. Install correctly to give shock protection. Loose and incorrect plug and socket connections can make the terminal become too hot. A qualified electrician must install the connections in the clamps correctly. Use a strain relief clamp on cable.
Product description min. 25 mm min. 5 mm min. 20 mm 7 min. 38 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven.
Product description Control panel layout 1 2 11 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate. Sensor field Function 1 It activates and deactivates the appliance. 2 It locks and unlocks the control panel. 3 Heat setting display It shows the heat setting. 4 Timer indicators for the cooking zones It shows for which zone you set the time. 5 Timer display It shows the time in minutes.
Operating instructions Display 9 Description Lock/ The Child Safety device operates. Power function operates. The Automatic Switch Off operates. Residual heat indicator WARNING! The risk of burns from residual heat! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. OPERATING INSTRUCTIONS Activation and deactivation Touch for 1 second to activate or deactivate the appliance.
Operating instructions Do the procedure again to deactivate the outer ring. The indicator goes out. Automatic Heat Up 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 You can get the necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function: 1. Touch . comes on in the display. 2.
Operating instructions 11 Set the Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • To set the cooking zone:touch again and again until the indicator of a necessary cooking zone comes on. • To activate or change the Timer: touch or of the timer to set the time ( 00 - 99 minutes). When the indicator of the cooking zone starts to flash slow, the time counts down.
Helpful hints and tips To deactivate the child safety device • Activate the appliance with . Do not set the heat settings. Touch for 4 seconds. The symbol comes on. • Deactivate the appliance with . To override the child safety device for only one cooking time • Activate the appliance with . The symbol comes on. • Touch for 4 seconds. Set the heat setting in 10 seconds. You can operate the appliance. • When you deactivate the appliance with , the child safety device operates again.
Care and cleaning 13 Energy saving • If it is possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it. The Examples of cooking applications The data in the table is for guidance only.
What to do if… WARNING! The sharp objects and abrasive cleaning agents can cause damage to the appliance. For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners. Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass .
Environment concerns Problem 15 Possible cause and remedy The heat setting changes between two levels. The Power management is activated. See the section Power management. You cannot activate outer ring. Activate the inner ring first. The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear cooking zones if it is necessary. comes on The Automatic Switch Off operates. Deactivate the appliance and activate it again.
Packaging material The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality.
www.aeg.