HK683320XG EN HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 5 8 10 14 15 16 17 20 20 Safety information Conditions of use Safety instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Installation instructions Environment concerns Warranty The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
Conditions of use 5 • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • If the glass ceramic surface is cracked, switch off the appliance to avoid the possibility of electric shock. • After use, switch off the hob element by its control and do not rely on the pan detector.
Safety instructions • All electrical connections must be made by a qualified electrician. • The appliance must be earthed. • Before carrying out any operation make sure that the appliance is disconnected from the power supply. • Use the correct electricity mains cable. • Do not let the electricity mains cable tangle.
Safety instructions 7 • Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. WARNING! Risk of damage to the appliance. • • • • • • Do not keep hot cookware on the control panel. Do not let cookware to boil dry. Be careful not let objects or cookware fall on the appliance. The surface can be damaged.
Product description PRODUCT DESCRIPTION General overview 1 2 1 Induction cooking zone 2300 W, with Power function 3200 W 2 Double ring induction cooking zone 1800/2800 W, with Power function 3500/3700 W (minimum cookware diameter = 145 mm). 3 Control panel 4 Induction cooking zone 2300 W, with Power function 3200 W 180/280 mm 4 3 Control panel layout 6 5 7 4 8 4 3 9 2 1 10 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate.
Product description sensor field function the control bar 7 9 To set the heat setting. It sets the timer ( Automatic Counter , Power-off timer , Minute Minder ). 8 / 9 It set the settings. OK 10 It confirms the setting. Display Messages in the display and sounds tell which functions operate. 4 5 6 9:23 3 12 2 15:23 7 1 1 2 3 4 5 6 7 The cooking zone in the display 12 The cooking zones The Key lock function operates. The function operates.
Operating instructions The cooking zone in the display Description There is no cookware on the cooking zone. ? The Automatic Heat Up function operates. A OptiHeat Control. The cooking zone is off. The Dimension and colours show the residual heat: • Big red - still cooking • Big bright red - keep warm • Small bright red - still hot • Small white - the cooking zone is cold Residual heat WARNING! After, a cooking session the cooking zone stay hot.
Operating instructions 11 • You do not deactivate a cooking zone or change the heat setting. After some time, the appliance deactivates. See the table. The times of Automatic Switch Off The heat setting 1-3 4-7 8-9 10-14 The cooking zone deactivates after 6 hours 5 hours 4 hours 1.5 hours Language selection To change the language, start the appliance with and than touch OK. Set the language menu with arrows. Touch OK to confirm. The display shows the list of languages.
Operating instructions You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the illustration), and then decreases to the necessary heat setting. To start the Automatic Heat Up function for a cooking zone: 1. Touch . 2. Immediately touch the necessary heat setting. (A comes on the display) To deactivate the function change the heat setting.
Operating instructions 13 Power-off timer Use the Power-off timer to set how long the cooking zone operates for only this one time. Touch two times to get the Power-off timer . Then set the cooking zone from the list with arrows and touch OK to confirm. Set the time with arrows and touch OK to confirm. When the time comes to an end , the zone deactivates. • To stop the sound: touch Minute Minder Touch three times to get the Minute Minder . Set the time with arrows. The Minute Minder indicator comes on.
Helpful hints and tips When this function operates, you can hear the sounds only when: • you touch • the Minute Minder comes down • the Power-off timer comes off • you put something on the control panel. HELPFUL HINTS AND TIPS Use the induction cooking zones with correct cookware. Put the cookware on the cross which is on the surface that you cook. Cover the cross fully. The magnetic part of the bottom of the cookware must be 125mm minimum.
Care and cleaning 15 Energy saving • If it is possible, always put the lids on the cookware. • Put cookware on a cooking zone before you start it. Öko Timer (Eco Timer) To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. The examples of cooking applications The data in the table is for guidance only.
What to do if… WARNING! The sharp objects and abrasive cleaning agents can cause damage to the appliance. For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners. Scratches or dark stains on the glass-ceramic cause no effect on how the appliance operates. To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass .
Installation instructions Problem 17 Possible cause and remedy There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals (see OffSound Control). The backlight is on but the con- The hot cookware is on the display. Remove the object and let trast of the display is bad. the appliance become sufficiently cool. It the contrast do not come back, speak to service centre. II and text comes on The Automatic Switch Off operates.
Installation instructions • Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. • Only an authorized servicing technician can install, connect or repair this appliance. Use only original spare parts. • Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards. • Do not change the specifications or change this product.
Installation instructions 19 Assembly min. 500mm min. 50mm min. 2mm R 5mm 55mm 490+1mm 560+1mm min. 12 mm min. 2 mm min. 38 mm min. 2 mm If you use a protection box (an additional accessory1)), the front airflow space of 2 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier.
Environment concerns ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office. Packaging material The packaging materials are friendly to the environment and can be recycled.
Warranty 2. 3. 4. 5. 6. 7. 8. 21 – this Appliance is not designed for commercial use and therefore no warranty applies in this case; h) ‘you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and ‘your’ has a corresponding meaning. This warranty only applies to Appliances purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) any non-excludable statutory warranties in Australia or New Zealand.
Warranty 9. 10. 11. 12. 13. 14. To the extent permitted by law, AEG excludes all warranties and liabilities (other than as contained in this document) including liability for any loss or damage whether direct or indirect arising from your purchase, use or non use of the Appliance. For Appliances and services provided by AEG in Australia, the Appliances come with a guarantee by AEG that cannot be excluded under the Australian Consumer Law.
SERVICE NEW ZEALAND FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10 OR EMAIL customercare@electrolux.co.nz (New Zealand only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in New Zealand FREE CALL 0800 10 66 20 OR EMAIL customercare@electrolux.co.
www.aeg.