HK683320XG EN INDUCTION HOB USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 5 7 10 14 15 16 17 Safety information Installation instructions Product description Operating instructions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before the installation and use. Always keep these instructions with the appliance also if you move or sell it. The users must fully know the operation and safety functions of the appliance.
Installation instructions 5 • Cookware made of cast iron, cast aluminium or with damaged bottoms can cause scratch of the glass. Do not move them on the surface. • Do not let cookware boil dry to prevent the damage to cookware and the glass. • Do not use the cooking zones with empty cookware or without cookware. • Do not put the aluminium foil on the appliance. • Do not put hot cookware on the display, also when the appliance is off. There is a risk to discolour or other damage to the display.
Installation instructions • Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher or oven! • Do not install the appliance adjacent to doors and below windows! If not, when you open the doors or windows they can push off hot cookware from the appliance. WARNING! Risk of injury from electrical current. Carefully obey the instructions for electrical connections. • • • • • • • The electrical mains terminal is live. Make electrical mains terminal free of voltage.
Product description min. 25 mm min. 5 mm min. 20 mm 7 min. 38 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven.
Product description Control panel layout 6 5 7 4 8 4 3 9 2 1 10 Use the sensor fields to operate the appliance. Indicators, displays and sounds tell which functions operate. sensor field function 1 It activates and deactivates the appliance. 2 It activates and deactivates the Bridge function. 3 It locks/unlocks the control panel. 4 It activates and deactivates the STOP+GO function. 5 It activates the Power Boost function. 6 the display It shows the functions that operate.
Product description 4 5 6 9:23 3 12 2 15:23 7 1 1 2 3 4 5 6 7 The cooking zone in the display 12 The cooking zones The Key lock function operates. The function operates. Automatic Counter Power-off timer Minute Minder Minute Minder indicator Description The cooking zone operates. Above: heat setting, below: the timer. 15:23 Keep Warm / Stop+Go function operates. Power Boost is activated. P Power Boost operates. POWER 6 ? Zone in adjustment. There is no cookware on the cooking zone.
Operating instructions The cooking zone in the display Description OptiHeat Control. The cooking zone is off. The Dimension and colours show the residual heat: • Big red - still cooking • Big bright red - keep warm • Small bright red - still hot • Small white - the cooking zone is cold Residual heat WARNING! After, a cooking session the cooking zone stay hot. The risk of burns! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware.
Operating instructions 11 Language selection To change the language, start the appliance with and than touch OK. Set the language menu with arrows. Touch OK to confirm. The display shows the list of languages. Touch or to set the language. Touch OK to confirm. The heat setting Touch the control bar at the heat setting. Change up or down, if it is necessary. Do not release before you have a correct heat setting. The display shows the heat setting and the counter starts.
Operating instructions Power Boost Power Boost makes more power available to the induction cooking zones. Power Boost is activated for 10 minutes at most. After, that the induction cooking zone automatically sets back to highest heat setting. To activate the function, touch . in the ring comes on. As the zone gets more hot, the colour of the ring changes. To deactivate, touch a heat setting 1-14.
Operating instructions 13 • To stop the sound: touch STOP+GO The function sets all cooking zones that operate to the lowest heat setting ( ). When operates, you cannot change the heat setting. The function does not stop the timer function. • To activate this function touch . The symbol comes on. • To deactivate this function touch . The heat setting that you set before comes on. Lock When the cooking zones operate, you can lock the control panel, but not .
Helpful hints and tips HELPFUL HINTS AND TIPS Use the induction cooking zones with correct cookware. Put the cookware on the cross which is on the surface that you cook. Cover the cross fully. The magnetic part of the bottom of the cookware must be 125mm minimum. Induction cooking zones adapt to the dimension of the bottom of the cookware automatically. You can cook with the large cookware on two cooking zones at the same time.
Care and cleaning 15 The examples of cooking applications The data in the table is for guidance only. Heat setting 1 Use to: Time Hints Keep cooked foods warm as necessary Put a lid on a cookware. 1-3 Hollandaise sauce, melt: butter, chocolate, gelatine 5-25 min Mix from time to time. 1-3 Solidify: fluffy omelettes, baked eggs 10-40 min Cook with a lid on.
What to do if… To remove the dirt: 1. – Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the dirt can cause damage to the appliance. Use a special scraper for the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface . – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic or stainless steel. 2.
Environment concerns Problem 17 Possible cause and remedy ? comes on • No cookware on the cooking zone. Put cookware on the cooking zone. • Not correct cookware. Use the correct cookware. • The diameter of the bottom of the cookware is too small for the cooking zone. Use cookware with correct dimensions. • The cookware do not cover the cross. Cover the cross fully. E and number comes on. There is an error in the appliance. Disconnect the appliance from the electrical supply for some time.
www.aeg.
