User manual

Downloaded from www.vandenborre.be
Automatic Switch Off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
The heat setting
, - - - -
The cooking zone
deactivates after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch the control bar at the heat setting. Change
up or down, if it is necessary. Do not release be-
fore you have a correct heat setting.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension of the cookware.
To activate the outer ring touch the sensor field
/ . The indicator comes on. For
more outer rings touch the same sensor field again. The subsequent indicator comes on.
Do the procedure again to deactivate the outer ring. The indicator goes out.
24 Operating instructions