HK834060XB User manual Ceramic glass hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Installation instructions 3 Safety during operation • Remove all packaging, stickers and layers from the appliance before the first use. • Set the cooking zones to "off" after each use. • Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can become hot. WARNING! Fire danger! Overheated fats and oils can ignite very quickly. Correct operation • • • • Always monitor the appliance during operation.
Installation instructions Safety instructions WARNING! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. Only an authorised service technician can install, connect or repair this appliance. Use only original spare parts. Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards.
Installation instructions Assembly min. 50 mm min. 500 mm min. 50 mm R 5mm = 600mm 490+1mm 750+1mm = min. 25 mm min. 20 mm min. 30 mm If you use a protection box (additional accessory), the protective floor directly below the appliance is not necessary.
Product description Product description Cooking surface layout 1 2 145 265 mm 170 mm 145 120/210 1 2 3 4 5 mm 3 mm mm 5 Single cooking zone 1200 W Oval cooking zone 1500/2400 W Single cooking zone 1200 W Control panel Double cooking zone 750/2200 W 4 Control panel layout 1 2 11 3 10 4 9 5 6 7 8 Use the sensor fields to operate the appliance. Displays indicators and sounds tell which functions operate.
Operating instructions sensor field 7 function starts and stops the STOP+GO function 11 Heat setting displays Display Description The cooking zone is off The cooking zone operates - Keep Warm / function is on The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Residual heat indicator WARNING! Risk of burns from residual heat! Operating instructions On and Off Touch for 2 seconds to
/ Operating instructions Switching the outer rings on and off You can match the effective heating surface to the size of the cookware. . The indicator comes on. For To switch on the outer ring touch the sensor field / more outer rings touch the same sensor field again. The next indicator comes on. Do the procedure again to switch off the outer ring. The indicator goes out. Automatic Heat Up You can get a necessary heat setting in a shorter time if you activate the Automatic Heat Up function.
Helpful hints and tips 9 Locking / unlocking the control panel You can lock the control panel, but not . It prevents an accidental change of the heat setting during a cooking session. Touch the symbol . The symbol comes on for 4 seconds. The Timer still operates. Touch the symbol to switch off this function. The heat setting that you set before comes on. When you switch off the appliance, you also switch off this function. The child safety device This function prevents an accidental operation of the hob.
Care and cleaning Heat setting 1 Use to: Keep cooked foods warm Time as required Hints Cover 1-2 Hollandaise sauce, melt: butter, choco- 5-25 late, gelatine min Mix occasionally 1-2 Solidify: fluffy omelettes, baked eggs Cook with a lid on 2-3 Simmer rice and milkbased dishes, heat- 25-50 ing up ready-cooked meals min Add at least twice as much liquid as rice, stir milk dishes part way through 3-4 Steam vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 4-5 Steam potatoes
What to do if… 11 – Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic or stainless steel. 2. Clean the appliance with a damp cloth and some detergent. 3. At the end rub the appliance dry with a clean cloth. What to do if… Problem Possible cause and remedy You cannot start the appliance or operate it. • You touched 2 or more sensor fields at the same time.
Environment concerns If you operated the appliance incorrectly, the servicing by a customer service technician or dealer will not be free of charge, even during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
www.electrolux.com 892935897-C-032010 www.aeg-electrolux.