HK854200FB User manual Ceramic glass induction hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Safety information 3 WARNING! Start the child safety device to prevent small children and pets from an accidental activation of the appliance. Safety during operation • Remove all packaging, stickers and layers from the appliance before the first use. • Set the cooking zones to "off" after each use. • Risk of burns! Do not put metallic objects, for example cutlery or saucepan lids, on the cooking surface, as they can become hot.
Installation Installation Before the installation , note down this data from the rating plate: • Model description (Modell)................ • Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ............... You find the rating plate of the appliance on its lower casing.
Installation 5 • Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C, or equivalent). Speak your local Service Force Centre. The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm. You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. Assembly min. 500 mm min. 50 mm min.
Safety information Safety information Cooking surface layout 1 2 1 Induction cooking zone 1800W, with the Power function 2800W 2 Induction cooking zone 1400 W, with Power function 2500W 3 Induction cooking zone 1800W, with the Power function 2800W 4 Control panel 5 Induction cooking zone 2300W, with the Power function 3700W 145 180 mm mm 180 210 mm mm 5 4 3 Control panel layout 1 2 10 3 4 9 8 5 7 6 Use the sensor fields to operate the appliance.
Operating the appliance 7 Heat setting displays Displays show which functions operate Display Description The cooking zone is off The cooking zone operates - Keep Warm The automatic heat-up function is on Power function is on + digit There is a malfunction / OptiHeat Control (3 step Residual heat indicator): still cooking / keep warm / residual heat / Lock/Child safety function is on Cookware unsuitable or too small or no cookware on the cooking zone The automatic switch off is on OptiHeat Contro
Operating the appliance Automatic Switch Off times Heat setting 1-3 4-6 7-8 9-14 Stops after 6 hours 5 hours 4 hours 1.5 hours The heat setting Touch the control bar at the necessary heat setting. Change to the left or the right, if it is necessary. Do not release before you have a correct heat setting. The display shows the heat setting. P The automatic heat up Automatic heat up function sets the highest heat setting (not ) for some time, and then decreases to the necessary level.
Operating the appliance 9 Power management The power management divides the power between two cooking zones in a pair (see the figure). The power function increases the power to the maximum level for one cooking zone in the pair and automatically decreases in the second cooking zone to a lower power level. The display for the reduced zone alternates. Using the Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session.
Operating the appliance Minute Minder You can use the timer as a Minute Minder while cooking zones do not operate. Touch . Touch or of the timer to select the time. When the time elapses, the sound operates and 00 flashes. Starting the STOP+GO The function sets all cooking zones that operate to a keep warm setting. • Touch to start this function. The symbol comes on. • Touch to stop this function. The heat setting that you set before comes on. does not stop the timer function.
Helpful hints and tips 11 Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, because the sound is off. Touch , comes on, the appliance is in standard mode. The sound is on. Helpful hints and tips Cookware for induction cooking zones In induction cooking a powerful electromagnetic field generates an almost instant heat inside the cookware.
Care and cleaning Heat setting Use to: Time Hints 3-5 Simmer rice and milkbased dishes, heat- 25-50 ing up ready-cooked meals min Add at least twice as much liquid as rice, stir milk dishes part way through 5-7 Steam vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 7-9 Steam potatoes 20-60 min Use max.
What to do if... 13 Removing the dirt: 1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an acute angle and slide the blade on the surface. – Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic or stainless steel. 2.
Environment concerns Problem and number come on. comes on There is no signal when you touch panel keys Possible cause and remedy There is an error in the appliance. Disconnect the appliance from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect again. If comes on again, speak to the after sales service. There is an error in the appliance, because a cookware boils dry or you use not correct cookware.
www.electrolux.com 892932083-B-102009 To buy accessories, consumables and spare parts at our online shop please visit: www.aegelectrolux.co.
