Operation Manual

g
17
0 Button (Figure 2/C) is for
selecting the aroma setting (symbol
lights).
0 Pressing the button again
changes between the number of cups
and , the aroma setting remains
on.
0 To cancel the aroma setting, press
button (Figure 2/G), the symbol
will go out and the number of
cups lights.
5.1 Preparing coffee instantane-
ously (Normal mode)
0 Pour in water (Item 1.2).
0 Swing out the swivel filter (Figure 1/B).
0 Insert filter paper (Item 1.3).
0 Swing the swivel filter back.
0 Place coffee jug on the warming plate
(Item 1.4).
0 Swing out the water supply (Figure
1/D) using the swivel lever (Figure 1/H)
until it engages (Figure 13).
0 Set the desired number of cups with
the button (Figure 2/G).
0 Set the desired coffee strength with
the button (Figure 2/D).
0 Where applicable (when preparing a
max. of 4 cups) select the aroma set-
ting with button (Figure 2/C).
Example:
You require e.g.: 4 cups: medium
strength, with aroma setting
– the display shows:
Press button (Figure 2/B). The
red indicator will come on. Grinding
will begin at once. Once the coffee has
been ground, the water supply swings
back automatically to the brewing
position and brewing begins.
3
As long as the red indicator next to
button (Bild 2/B) is on, only the
button will work.
5.2 Preparing coffee using the
coffee grinder with pre-pro-
gramming of the start time
(„Auto“ function)
0 Pour in water (Item 1.2).
0 Swing out the swivel filter (Figure 1/B).
0 Insert filter paper (Item 1.3).
0 Swing the swivel filter back.
0 Place coffee jug on the warming plate
(Item 1.4).
0 Swing out the water supply (Figure
1/D) using the swivel lever (Figure 1/H)
until it engages (Figure 13).
Programming the „Auto“function:
0 Press button (Figure 2/K).
The green lamp next to the
button (Figure 2/F) flashes. The
following settings must be made whilst
the green lamp is flashing.
3
If the green lamp has already ceased to
flash before the settings are com-
pleted, press button (Figure 2/F)
again and continue with the program-
ming.
0 Set the desired start time with the
buttons (Figure 2/E) and
(Figure 2/J).
0 Set the desired number of cups with
the button (Figure 2/G).
0 Set the desired coffee strength with
the button (Figure 2/D).
0 Where applicable (when preparing a
max. of 4 cups) select the aroma set-
ting with button (Figure 2/C).
Example:
You require e.g.: Start 08.00 hours,
4 cups, medium strength, with aroma
setting
– the display shows:
The green lamp ceases to flash ca.
3 seconds after the last button actua-
tion. This indicates that the settings are
saved. The display once again shows the
time and the settings in normal mode.
2-4
2-4
2-10
2-10
2-4
PROG
AUTO
AUTO
H MIN
2-10
2-4
822_949_330 KAM200.book Seite 17 Donnerstag, 17. Januar 2008 9:49 21