User manual

To prevent risk of injury, damaged connection cables must be replaced by our
Customer Care Department or a designated specialist
Safety information for the installation engineer
• The electrical installation is provided with a device to enable the appliance to be
cut off from the mains with with a minimum 3 mm all-pole contact separation.
Suitable separation devices include e. g. cut-outs, fuses (screw fuses are to be
taken out of the holder), RCDs and contactors.
• The site must provide a connection to the electrical supply by means of a socket
that is accessible and outside the configuration space.
• Anti-shock protection must be provided by the installation.
• The built-in unit must meet the stability requirements of DIN 68930.
1a
375
592
567
592
252
388
20
380-383
min.
550
min.
560
13
49