LAVAMAT 14950A User manual Washer-dryer
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Safety information Emergency emptying out What to do if… Technical data 29 29 33 Consumption values Installation instructions 33 34 Installation Unpacking 34 34 3 Positioning and levelling Water inlet Water-stop device Water drainage Electrical connection 36 37 38 38 39 Environment concerns Packaging materials Ecological hints 39 40 40 Subject to change without notice Operating instructions Safety information Read carefully & keep for future reference.
Safety information • Always unplug the appliance and turn off the water supply after use, cleaning and maintenance. • Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts. Installation • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged.
Product description 5 • Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-todry you should use the conventional detergent dispenser drawer. • Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
Control panel 2 1 3 4 6 1 2 3 4 5 6 5 Detergent dispenser drawer Control panel Door opening handle Rating plate Drain pump Adjustable feet Detergent dispenser drawer Compartment for prewash phase or stain remover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main wash . Compartment for liquid additives (fabric softener, starch).
9 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 Programme selector dial SPIN REDUCTION button (TPM - ESSORAGE) AUTODRY button (AUTOM.DROOG - SÉCHAGE AUTO) DRYING TIME button (DROOGTIJD - TEMPS DE SÉCHAGE) OPTION button (OPTIES - OPTIONS) OK button START/PAUSE button (START/PAUZE - DÉPART/PAUSE) DELAY START button (STARTUITSTEL - DÉPART/DIFFÉRÉ) Display Symbols on the control panel = Handwash Display 9.1 9.2 9.3 9.4 9.9 9.8 9.5 9.6 9.7 9.
9.3 - Programme progress indicator: PREWASH , MAIN WASH , RINSE , SPIN , OVERDOSAGE , EXTRA RINSE , DRYING , DRYING ANTI-CREASE phase symbols, The programme progress display shows the washing or drying phases of the selected programme. During a cycle, a black line blinks under the phase symbol of the running programme. At the end of each phase, the line under the corresponding symbol becomes fixed.
First use 9 First use • Ensure that the electrical and water connections comply with the installation instructions. • Remove the polystyrene block and any material from the drum. • Before the first wash, run a cotton cycle at the highest temperature without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
Daily use Washing Only Measure out the detergent and the fabric softener Your new appliance was designed to reduce water, energy and detergent consumption. 1. Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and, if you wish to carry out the prewash phase or to perform the stain function, pour the detergent or the stain remover into the compartment . marked 2.
Daily use 11 If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button 7 will blink 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme. Select the spin speed, NIGHT CYCLE or RINSE HOLD option (button 2) When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.
Daily use After selecting the options, wait a few seconds until the display gets back to the default status. The selected options appear on the display. For the compatibility among the options and the washing programmes see chapter «Washing Programmes». PREWASH option Select this option if you wish your laundry to be prewashed at 30°C before the main wash.
Daily use 13 Select the START/PAUSE (button 7) To start the selected programme, press the button 7 , the corresponding red pilot light stops blinking. The DOOR symbol appears on the display to indicate that the appliance has started operating and the door is locked. To interrupt a programme which is running, press the button 7 : the corresponding red pilot light starts blinking. To restart the programme from the point at which it was interrupted, press the button 7 again.
Interrupting a programme Press the button 7 to interrupt a programme which is running, the corresponding light starts blinking. Press the button again to restart the programme. Cancelling a programme Turn the selector dial to a new programme. to cancel a programme which is running. Now you can select Opening the door after the programme has started When the machine is working and through the delay time, the door is locked.
Use - Drying 15 Use - Drying Drying only The recommended load size is 4 kg for cottons and linen, and 3 kg for synthetic items. By pressing Drying Time button it is also possible to dry up to 6 kg of cotton items (see the «Drying Programme » table). The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. 1. Load the laundry. 2. Select a spin cycle at the maximum spin speed allowed for the type of laundry in order to obtain the best drying performances.
Use - Drying During this time the ANTI-CREASE symbol appears on the display. The DOOR symbol remains lit. The door cannot be opened. If you need to open the door before or during the anti-crease phase or to interrupt it, press any button or turn the programme selector dial to any programme position (except O ), the door can be opened immediately or after a few minutes depending on the model. (In any case do not try to open the door if it is locked!) . 7.
Washing programmes 17 Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Fabrics Load - Type of Laundry Options KATOEN - BLANC/COULEURS 95° - 60° Main wash - Rinses - Long spin at the maximum spin speed Max. load 8 kg - Reduced load 4 kg1) White cotton (heavily or normally soiled items). SPIN REDUCTION NIGHT CYCLE RINSE HOLD PREWASH2) STAIN SENSITIVE EXTRA RINSE DAILY SUPER QUICK1) 40 - 60 MIX 40° Main wash - Rinses - Long spin at the maximum spin speed Max.
Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Fabrics Load - Type of Laundry Options STRIJKVRIJ PLUS - REPASSAGE FACILE PLUS 40° Main wash - Rinses - Short spin Max. load 1,5 kg Synthetic fabrics to be gentle washed and spun. Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses.
Washing programmes Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Fabrics Load - Type of Laundry Options CENTRIFUG. - ESSORAGE Drain and long spin at the maximum spin speed Max. load 8 kg Separate spin for hand washed cotton garments and after programmes with the option selected, which ends with water left in the tub. Before selecting this .
Drying Programmes Drying Programmes Automatic Programmes Degree of Drying Type of Fabric Max Load EXTRA DRY Suitable for items to put away without ironing Cotton and linen (bathrobes, bath towels, etc) 4 kg CUPBOARD DRY Suitable for items to put away without ironing Cotton and linen (bathrobes, bath towels, etc) 4 kg CUPBOARD DRY Synthetics and mixed fabSuitable for items to put away without iron- rics (jumpers, blouses, undering wear, household linen) 3 kg Cotton and linen (sheets, tableclo
Helpful hints and tips 21 Temperatures 95° or 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60°/50° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....) in linen, cotton or synthetic fibres and for lightly soiled white cotton (e.g. underwear) 40°-30°- Cold for delicate items (e.g.
Helpful hints and tips Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold.
Drying Hints 23 A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft). Degrees of water hardness Level Characteristic German °dH French °T.H.
Care and cleaning • • • = Drying at high temperature = Drying at reduced temperature = Do not tumble dry. Drying cycle duration The drying time may vary depending on: • speed of the final spin • dryness degree required (iron dry, store dry) • type of laundry • weight of the load size . The average drying time for a timed drying are indicated in the «Drying programmes» chapter. The experience will help you to dry your laundry in a more suitable way, according to the different fabrics.
Care and cleaning 25 External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Do not use methylated spirits, solvents or similar products to clean the cabinet. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4.
Care and cleaning Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Drain pump The pump should be inspected regularly and particularly if: • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled down. 3. Open the pump door. 4. 5.
Care and cleaning 6. When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump. 7. Remove any objects from the pump impeller by rotating it. 8. Put the cap back on the emergency emptying hose and place the latter back in its seat. 27 9. Screw the pump fully in. 10. Close the pump door. WARNING! When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Care and cleaning 1. Turn off the water tap. 2. Unscrew the hose from the tap. 3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap. Make sure the connection is tight. 5. Unscrew the hose from the machine. Keep a rug nearby because some water may flow. 6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the machine and make sure the connection is tight. 8. Turn on the water tap.
What to do if… 29 By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance. When you use the machine again, make sure that the ambient temperature is above 0°C. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. pull out the plug from the power socket; 2. close the water tap; 3. if necessary, wait until the water has cooled down; 4. open the pump door; 5.
What to do if… Problem Possible cause/Solution The washing machine does not start: The door has not been closed. • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse. The selector dial is not correctly positioned and the button 7 has not been pressed.
What to do if… Problem 31 Possible cause/Solution There is water on the floor: Too much detergent or unsuitable detergent (creates too much foam) has been used. • Reduce the detergent quantity or use another one. Check whether there are any leaks from one of the inlet hose fittings. It is not always easy to see this as the water runs down the hose; check to see if it is damp. • Check the water inlet hose connection. The drain or the inlet hose is damaged. • Replace it with a new one.
What to do if… Problem Possible cause/Solution The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum. This may happen several times before the unbalance disapSpinning starts late or the machine does not pears and normal spinning can resume. If, after some minutes, the laundry is still not evenly spin: distributed in the drum, the machine will not spin.
Technical data 33 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Technical data Dimensions Width Height Depth 60 cm 82 cm 63 cm Electrical connection Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door.
Installation Programme Energy consumption (KWh) Water consumption (litres) Wool/ Handwash 30° 0.32 64 Programme duration (Minutes) 1) «Cotton Energy Saving programme » at 60°C with a load of 8 kg is the reference programme for the data entered in the energy label, in compliance with EEC 92/75 standards.
Installation 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance. 3. Unscrew the three bolts using the key supplied with the machine. 4. Slide out the relevant plastic spacers.
Installation 5. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. 7. Connect the water inlet hose as described under the paragraph «Water inlet». Positioning and levelling Install the machine on a flat hard floor.
Installation 37 Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown. Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor. Water inlet An inlet hose is supplied and can be found inside the machine drum. This appliance must be connected to a cold water supply.
Installation Water-stop device The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A» . Should this occur, turn the water tap off and refer to your Service Centre to replace the hose. Water drainage The end of the drain hose can be positioned in three ways: 1.
Electrical connection 39 The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use. WARNING! Connect the machine to an earthed socket.
Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
132 951 311 - 00 - 062010 www.electrolux.