User manual

• When the programme has finished, a steadily lit zero is displayed.
• Delayed start, (23 hours max.) programmed using the special button.
The countdown is updated every hour.
• Alarm code indicating a fault in the machine operation).
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on.
After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the END (EINDE - FIN) pilot light comes on.
When the programme has finished, if the OVER DOSING (OVERDOSER-
ING/SURDOSAGE) light comes on, it indicates that too much detergent
has been used or that the drain filter is blocked.
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the OFF/O position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option), turn the selector dial first to O and then to the
DRAIN, SPIN or DELICATE SPIN programme.
Altering a programme which is running
To alter a programme, first set the machine to PAUSE by pressing the
START/PAUSE button.
Any function can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
OFF/O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
67
Description of the appliance
SPOELEN
RINÇAGE
EXTRA SPOELEN
RINÇAGE PLUS
CENTRIFUGEREN
ESSORAGE
DROGEN
SÉCHAGE
EINDE
FIN
DEUR
PORTE
OVERDOSERING
SURDOSAGE
132985210 gb.qxd 07/03/2005 13:54 Pagina 67