LAVAMAT 46800 User manual Washing machine
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 Contents Warnings Use Precautions to be taken against frost Description of the appliance Dispenser box Control panel Display Personalisation Child safety How to run a wash cycle Loading washing Proportioning of detergents Selecting the programme Selecting the spin speed Selecting options Prewash Stain Time saving Rinse plus Start of the programme Programme sequence Adding washing during the first 10 minutes Modifying the programme in progress Cancelling the programme End of the programme Standb
Contents Dispenser box Object trap Water inlet filters Operating problems Warnings Installation Unpacking Untying Water supply Drainage Electrical connection Positioning Environment Disposing of the appliance Protecting the environment 20 22 23 24 27 28 28 30 32 33 34 34 36 36 36 The following symbols have been used in this user guide : Important information about concerning your safety and information on how to avoid damaging the appliance. General information. Information concerning the environment.
Warnings 5 Warnings Keep this user manual with your appliance. If the appliance is sold or given to another person, please make sure this user manual is included. This way, the new user will have the relevant operating instructions and warnings. These warnings are for the safety of you and others around you. Please read these points carefully before installing and using your appliance. Thank you for your attention. Use • Unpack or ask for the appliance to be unpacked immediately upon arrival.
Warnings Precautions to be taken against frost If your appliance is exposed to temperatures below 0°C, the following precautions must be taken : • Close the tap and disconnect the inlet hose. • Place the end of this hose and the drain hose in a basin on the floor. • Select the Drain programme let it run until the end of the cycle. • Disconnect the appliance from the power supply by turning the program selector to “Stop”. • Unplug the appliance. • Screw the inlet hose back on and replace the drain hose.
Description of the appliance 7 Description of the appliance The control panel Lid Lid handle Lever for moving the appliance Adjustable levelling feet Dispenser box Prewash Wash Softener (do not fill above the MAX symbol M )
Description of the appliance Control panel Programme selector Display Pushbuttons and Indicators their functions Start/Pause pushbutton Display Length of cycle or Timer delay countdown Child safety
Description of the appliance 9 Personalisation Child safety This option provides two types of locking : - if the option is activated after the cycle has started, no changes to the options or programme are possible. The cycle runs and you must deactivate the option to run a new cycle. - if the option is activated before the cycle has started, the appliance cannot be started. To activate the child safety device, you must : 1.Switch the appliance on. 2.
How to run a wash cycle How to run a wash cycle ? Before you wash laundry in your washing machine for the first time, we recommend you run a preliminary wash at 95°C, with no laundry but with detergent. This will clean the tub. Loading washing • Open the lid of the appliance. • Open the drum by depressing the locking button A : The two shutters unlock automatically. • Load the washing, close the drum and the lid of your washing machine.
How to run a wash cycle 11 If the programme dial is turned while the washing machine is on a washing cycle, the error code “Err” appears in the display window and the START/PAUSE button flashes in yellow for a few seconds. The programme then continues without taking any notice of the new position of the dial. To remedy the problem, put the dial back to its initial position. The breakdown of the cycle phases reappears in the display window.
How to run a wash cycle Stain For very dirty or stained washing. A stain removing product can be poured into the prewash compartment in the product dispenser. Time saving This function allows you to reduce the length of the cycle depending on the type of programme selected. Rinse plus This option means one or more rinses can be added to the programmes Cottons, Synthetics and Delicates.
How to run a wash cycle 13 Modifying the programme in progress Before making any changes to the current programme, you need to pause the washing machine by pressing the START/PAUSE pushbutton. If the modification is not possible, “Err” flashes in the display window and the START/PAUSE button flashes in yellow for several seconds. If you still decide to change the programme, you must cancel the current programme (see below).
Washing guide Washing guide Sorting and preparing the washing • Sort washing by type and care label (refer to International symbols section below) : normal wash for tough fabrics which can withstand intense washing and spinning cycles ; delicate wash for delicate fabrics which need to be treated with care. For mixed loads, loads with items of different types of material, choose a programme and a temperature suitable for the most fragile material.
Washing guide 15 Detergents and additives Only use detergents and additives designed for use in a washing machine. Refer to manufacturer’s recommendations and also Dispenser box and Using the right amount of detergent sections. We do not recommend mixing different types of detergents. This may spoil the washing. The amount of detergent to be used depends on the size of the load, the hardness of the water and how heavily soiled the washing is. If the water is soft, reduce the amount slightly.
Washing guide International symbols NORMAL WASH Wash at 95°C Wash at 60°C Wash at 40°C Wash at 30°C Hand wash DELICATE WASH BLEACHING Whitewashing (bleach) allowed (cold only and in diluted solution) Do not wash No whitewashing (bleach) IRONING High temperature (max 200°C) Mid temperature (max 150°C) Low temperature (max 100°C) Do not iron DRY CLEANING Dry cleaning (all common solvents) Dry cleaning (all common solvents except trichlorethylene Dry cleaning (only oil-based solvents and
Programmes table 17 Programmes table All the possibilities are not listed here, only the settings which are customary and sound in practice. Programme / Type of washing Load Possible options Cotton : White or colour, e.g., normally soiled work clothes, bed linen, table linen, body linen, towels. 5,5 kg Prewash Stain* Time saving Rinse plus Rinse hold Synthetics : Synthetic fabrics, body linen, coloured fabrics, non-iron shirts, blouses.
Consumption 18 Consumption Temperatures Water consumption in litres Energy consumption in kWh Cotton 95 67 2,20 Cotton 60 62 1,30 Cotton 40 62 0,75 Cotton 30 62 0,55 Cotton cold 62 0,45 Synthetics 60 48 0,85 Synthetics 40 48 0,65 Synthetics 30 48 0,55 Synthetics cold 48 0,20 Easy iron plus 40 51 0,55 Delicates 40 53 0,55 Delicates 30 53 0,30 Delicates cold 53 0,15 Wool plus / 30 48 0,40 Wool plus / cold 48 0,35 Rinses - 32 0,05 Drain - -
Technical specifications 19 Technical specifications DIMENSIONS Height Width Depth LINE VOLTAGE / FREQUENCY POWER CONSUMPTION WATER PRESSURE Connection to water supply 850 mm 400 mm 600 mm 230 V / 50 Hz 2300 W Minimum Maximum 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) Type 20x27 This appliance conforms to the CEE 89-336 directive concerning the limiting of radio-electric interference and the 2006/95/CE directive concerning electrical safety.
Care and cleaning Care and cleaning Unplug the appliance before cleaning. Descaling the appliance It is not generally necessary to remove limescale from the appliance if the detergent product is properly dosed. If it becomes necessary to remove limescale, use a commercially available special non-corrosive product specifically designed for washing machines. Follow the dosing instructions and observe the intervals between uses indicated on the packaging.
Care and cleaning 21 3. Clean the two parts of the detergent dispenser under running water. 4. Re-assemble the two parts of the detergent dispenser. 5. Reposition the detergent dispenser.
Care and cleaning Object trap Regularly clean out the object trap which is located at the bottom of the drum : Opertaion 1. Operation 2. Operation 3. Operation 4.
Care and cleaning Operation 5. Water inlet filters Unscrew the ends of the water inlet pipe and clean the filters.
Operating problems Operating problems Numerous checks were carried out on your appliance before it left the factory. However, should you notice a malfunction, please refer to the sections below before contacting the after-sales service.
Operating problems 25 Problems Causes the wash cycle is much too long: •the water inlet filters are dirty, •the power or water supply has been cut off, •the motor overheating detector has been activated, •the water inlet temperature is lower than usual, •the foam detection security system has been activated (too much detergent) and the washing machine has begun draining the foam, •the out of balance detector has been activated : an extra phase has been added to distribute washing more evenly in the dru
Operating problems * Depending on model. ** On some models, the audible signals can sound. *** After solving any problems, press the START/PAUSE pushbutton to restart the interrupted programme.
Warnings 27 Warnings • This appliance is heavy. Take care when moving it. • The appliance must have the transit bolts removed before use. If all protective transit devices are not removed, this could cause damage to the appliance or to neighbouring cabinets or furniture. The appliance must be unplugged from the electricity supply when the transit bolts are being removed. • Connection to the water supply must be carried out by a qualified plumber.
Installation Installation Remove all protective packaging for transit before using for the first time. Keep in case needed for future transit : Transporting a non-secured appliance may damage internal components and cause leakages and malfunctions. The appliance can also be damaged through physical contact. Unpacking 1. Tilt the appliance backwards. 2. Make it do a quarter turn on one of the corners to remove the transport base. 3. Open the lid of the appliance and remove the red block. 4.
Installation 5. Lift the detergent dispenser out upwards. 7. Replace the detergent dispenser. 29 6. Remove the block immobilising the drum.
Installation Untying 4 3 5 1 2 1 Operation 1. Operation 2. 2 Operation 3. Operation 4.
Installation 3 Operation 5. Operation 6. Operation 7. Operation 8. 4 Operation 9.
Installation To install your washing machine at the same level as surrounding furniture, proceed as follows : 5 Operation 1. Operation 2. Water supply Install the supplied water inlet hose at the rear of your washing machine by proceeding as follows (Do not reuse an old hose) : Operation 1. Operation 2.
Installation 33 Operation 3. Operation 4. Open the water inlet tap. Check there are no leaks. The water inlet hose can not be extended. If it is too short, please contact the after-sales service. Drainage The connector at the end of the flexible hose can be attached to all common types of standpipe. 1.Attach the connector to the standpipe with the hose clamp supplied with the appliance*. * depending on model 2.Fit the U-piece on the drainage hose.
Installation Air must be able to enter the end of the hose, to avoid any risk of siphoning. The drain hose must never be stretched. If it is too short, contact a tradesperson. Electrical connection This washing machine must only be connected in single-phased 230 V. Check the fuse size : 10 A for 230 V. The appliance must not be connected with an extension lead or multi-plug adaptor. Ensure that the plug is earthed and that it is in accordance with current norms.
Installation 3.When the appliance is stable, hold the foot against the floor and raise the collar as far as it will go.
Environment Environment Disposing of the appliance All materials carrying the symbol are recyclable. Dispose of them at a waste collection site (enquire at your local council) for collection and recycling. When disposing of your appliance, remove all parts which could be dangerous to others : cut off the power supply cable at the base of the appliance. The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
108 3687 01 - B - 222010 www.electrolux.
