LAVAMAT 52840D LAVAMAT 54840D Benutzerinformation Waschmaschine
Inhalt Danke, dass Sie sich für eines unserer hochqualitativen Produkte entschieden haben. Lesen Sie für eine optimale und gleichmäßige Leistung Ihres Gerätes diese Benutzerinformation bitte sorgfältig durch. Sie wird Ihnen helfen, alle Vorgänge perfekt und äußerst effizient zu steuern. Damit Sie diese Benutzerinformation bei Bedarf stets zur Hand haben, empfehlen wir Ihnen, sie an einem sicheren Ort aufzubewahren.
Sicherheitshinweise Umwelttipps 3 35 Änderungen vorbehalten GEBRAUCHSANWEISUNG SICHERHEITSHINWEISE Bitte sorgfältig lesen und für zukünftige Verwendung aufbewahren. • Die Sicherheit Ihres Gerätes entspricht den Industriestandards und den gesetzlichen Vorschriften zur Gerätesicherheit. Dennoch sehen wir uns als Hersteller verpflichtet, Sie mit den folgenden Sicherheitshinweisen vertraut zu machen. • Bewahren Sie die Bedienungsanleitung zum Nachschlagen immer in der Nähe des Gerätes auf.
Sicherheitshinweise gen führen. Wenden Sie sich an Ihren Kundendienst. Bestehen Sie immer auf OriginalErsatzteilen. Montage • Dieses Gerät ist schwer. Vorsicht beim Transport. • Überprüfen Sie beim Auspacken, dass das Gerät nicht beschädigt ist. In Zweifelsfällen benutzen Sie es nicht, sondern wenden Sie sich an den Kundendienst. • Alle Transportsicherungen und Verpackungsmaterialien müssen entfernt werden.
Gerätebeschreibung 5 eine Explosion verursachen. Trocknen Sie nur Wäschestücke im Trockner, die in Wasser gewaschen wurden, oder die durchgelüftet werden sollen. • Es dürfen keine Kunststoffflaschen-/behälter beim Trocknen in der Trommel sein, da der Kunststoff unter der Wärmeeinwirkung schmilzt. Wenn Sie Waschen und anschließend Trocknen möchten, sollten Sie die Waschmittelschublade verwenden. • Ziehen Sie niemals am Netzkabel, um den Stecker aus der Steckdose zu ziehen; sondern immer am Stecker.
Gerätebeschreibung 2 1 3 4 5 6 1 2 3 4 5 6 Waschmittelschublade Bedienblende Türgriff Typenschild Laugenpumpe Einstellbare Füße Waschmittelschublade Fach für Waschmittel oder Fleckentferner. Das Vorwaschmittel wird zu Beginn des Waschprogramms eingespült. Der Fleckentferner wird während der FLECKENBehandlungsphase im Hauptwaschgang zugefügt. Fach für Waschpulver oder Flüssigwaschmittel für den Hauptwaschgang . Fach für flüssige Pflegemittel (Weichspüler, Stärke).
Bedienblende 7 BEDIENBLENDE Nachstehend ist eine Bedienblende abgebildet. Sie zeigt den Programm-Wahlschalter und die verschiedenen Tasten und Kontrolllampen. Diese werden auf den folgenden Seiten durch die entsprechenden Nummern aufgeführt. 1 1 2 3 4 5 6 7 8 9 Programm-Wahlschalter SCHLEUDERN (U.
Display (6) 6.2 6.3 6.1 6.1 Dauer des gewünschten Programms : Nach der Auswahl eines Programms wird dessen Dauer in Stunden und Minuten angezeigt (z. B. ). Die Dauer wird automatisch aufgrund der maximal empfohlenen Beladung für jede Wäscheart errechnet. Nach dem Programmstart wird die verbleibende Zeit im Minutentakt aktualisiert. Alarmcodes Bei Betriebsstörungen werden im Display verschiedene Alarmcodes angezeigt, zum Beispiel (siehe Abschnitt „Was tun, wenn...“).
Kontrolllampen (8) Nach dem Drücken von Taste 7 leuchtet die Kontrolllampe WASCHEN ( 8.1 ) auf. Wenn die Kontrolllampe 8.1 aufleuchtet, bedeutet dies, dass das Gerät arbeitet. Die TÜR Kontrolllampe ( 8.2 ) zeigt an, dass die Tür geöffnet werden kann: • Anzeige ein: Die Tür kann nicht geöffnet werden. • Anzeige blinkt: Die Tür wird entriegelt. • Anzeige aus: die Tür kann geöffnet werden Führt die Maschine einige zusätzliche Spülgänge durch, leuchtet die EXTRA SPÜLEN Kontrolllampe( 8.3 ) auf.
Täglicher Gebrauch TÄGLICHER GEBRAUCH Einlegen der Wäsche 1. Öffnen Sie die Tür, indem Sie den Türgriff behutsam nach außen ziehen. Legen Sie die Wäsche Stück für Stück lose in die Trommel. 2. Drücken Sie die Tür fest zu. Das Schloss muss hörbar einrasten. WARNUNG! Achten Sie darauf, dass die Wäsche nicht zwischen Tür und Gummidichtung eingeklemmt wird. Messen Sie Waschmittel und Pflegemittel ab Ihr neues Gerät wurde speziell für die Einsparung von Wasser, Energie und Waschmittel konstruiert. 1.
Täglicher Gebrauch 11 Wählen Sie das gewünschte Programm mit dem Programm-Wahlschalter (1) Sie können das richtige Programm für jede Art von Wäsche anhand der Beschreibungen in den Waschprogrammtabellen auswählen (siehe "Waschprogramme"). Drehen Sie den Programm-Wahlschalter auf das gewünschte Programm. Mit dem Programm-Wahlschalter legen Sie je nach Wäschetyp das geeignete Waschprogramm (z. B. Wasserstand, Trommelbewegung, Anzahl der Spülgänge) und die Temperatur beim Waschen fest.
Täglicher Gebrauch Wählen Sie die Option VORWÄSCHE (Taste 3) Wählen Sie diese Option, wenn Sie Ihre Wäsche bei 30 °C vor dem Hauptwaschgang vorwaschen möchten. In den Programmen für Koch-/Buntwäsche und pflegeleichte Textilien endet die Vorwäsche mit einem kurzen Schleudergang. Bei den Programmen für Feinwäsche wird nur das Wasser abgepumpt. Die entsprechende Kontrolllampe leuchtet auf.
Täglicher Gebrauch 13 Wählen Sie die ZEITVORWAHL (Taste 9) Drücken Sie vor dem Start des Programms , wenn Sie den Waschgang später starten möchten, wiederholt die Taste zur Auswahl der gewünschten Verzögerung. Die gewählte Zeitvorwahl (max. 20 Stunden) wird auf dem Display für 3 Sekunden eingeblendet, dann wird wieder die Dauer des zuvor gewählten Programms angezeigt. Wählen Sie zuerst das Programm, dann diese Option und drücken Sie anschließend die Taste 7 .
Öffnen der Tür nach dem Programmstart Schalten Sie die Maschine auf Pause; drücken Sie dazu die Taste 7 . Wenn die Kontrolllampe 8.2 erlischt, kann die Tür nach einigen Minuten geöffnet werden. Wenn die Tür verriegelt bleibt, leuchtet die Kontrolllampe 8.2 ; dies bedeutet, dass das Gerät bereits aufheizt, und dass der Wasserstand bereits über den unteren Türrand reicht. In diesem Fall lässt sich die Tür nicht öffnen.
Waschprogramme WASCHPROGRAMME Programm - Höchst- und Mindesttemperatur - Programmbeschreibung - Maximale Schleuderdrehzahl - Maximale Beladung - Wäscheart Optionen Reinigungsmittelfach SCHLEUDERDREHKOCH-/BUNTWÄSCHE ZAHL (U./MIN) / 95°- 60° SPÜLSTOPP, VORWÄHauptwaschgang - Spülgänge - Langer Schleudergang SCHE1), FLECKEN, Maximale Schleuderdrehzahl bei 1200 U/min für Mo- EXTRA SPÜLEN, ZEITdell L 52840D (1400 für Modell L 54840D) SPAREN2) Max. Beladung 6 kg - Ver.
Waschprogramme Programm - Höchst- und Mindesttemperatur - Programmbeschreibung - Maximale Schleuderdrehzahl - Maximale Beladung - Wäscheart Optionen Reinigungsmittelfach SCHLEUDERDREHLEICHTBÜGELN PLUS 40° ZAHL (U./MIN) / Hauptwaschgang - Spülgänge - Kurzer SchleuderSPÜLSTOPP, VORWÄgang SCHE, EXTRA SPÜLEN Maximale Schleuderdrehzahl 1200 U/min Max. Beladung 1 kg Pflegeleichte Textilien, die sanft gewaschen und geschleudert werden sollen um Knitterfalten zu vermeiden.
Waschprogramme Programm - Höchst- und Mindesttemperatur - Programmbeschreibung - Maximale Schleuderdrehzahl - Maximale Beladung - Wäscheart Optionen Reinigungsmittelfach PUMPEN Abpumpen des Wassers Max. Beladung 6 kg Zum Abpumpen des letzten Spülwassers bei Programmen mit der Option Spülstopp. SCHLEUDERN Abpumpen und langer Schleudergang Maximale Schleuderdrehzahl bei 1200 U/min für Modell L 52840D (1400 für Modell L 54840D) Max.
Reinigung und Pflege 2) Wenn Sie die Option Extra Kurz durch Drücken der Taste 5 wählen, empfehlen wir Ihnen die Reduzierung der maximalen Beladung wie angezeigt. (Ver. Beladung = verringerte Beladung). Die volle Beladung ist mit leicht geminderten Reinigungsergebnissen dennoch möglich. 3) Bei der Verwendung von Flüssigwaschmitteln muss ein Programm ohne Vorwäsche ausgewählt werden. 4) Diese Zusatzfunktion ist nicht verfügbar bei einer Temperatur unter 40 °C.
Reinigung und Pflege 19 2. Entfernen Sie den Einsatz für Zusatzmittel aus dem mittleren Fach. 3. Alle Teile mit Wasser reinigen. 4. Den Einsatz für Zusatzmittel bis zum Anschlag aufstecken, so dass er fest sitzt. 5. Reinigen Sie den gesamten Einspülbereich der Waschmaschine, insbesondere die Düsen oben in der Waschmittelkammer mit einer Bürste. 6. Setzen Sie die Waschmittelschublade in die Führungsschienen ein und schieben Sie sie ins Gerät.
Reinigung und Pflege • Das Gerät nicht abpumpt und/oder schleudert. • Das Gerät beim Abpumpen ungewöhnliche Geräusche macht, weil Sicherheitsnadeln, Münzen o. ä. die Pumpe blockieren. • Eine Störung beim Wasserablauf besteht (siehe Abschnitt „Was tun, wenn...“). WARNUNG! Schalten Sie vor dem Öffnen der Pumpenklappe immer das Gerät ab und ziehen Sie den Netzstecker aus der Steckdose. Gehen Sie hierzu folgendermaßen vor: 1. Ziehen Sie den Netzstecker aus der Netzsteckdose. 2.
Reinigung und Pflege 8. 21 Entfernen Sie alle Fremdkörper und Flusen aus der Filteraufnahme und dem Pumpenflügelrad. 9. Prüfen Sie, ob sich das Pumpenflügelrad drehen lässt (es dreht sich ruckartig). Lässt es sich nicht drehen, wenden Sie sich bitte an Ihren Kundendienst. 10. Verschließen Sie den Notentleerungsschlauch und schieben Sie den Schlauch wieder in das Gerät. 11. Setzen Sie den Filter wieder in die Pumpe ein. Setzten Sie ihn richtig in die speziellen Führungen ein.
Reinigung und Pflege 1. Schließen Sie den Wasserhahn. 2. Schrauben Sie den Schlauch vom Hahn ab. 3. Reinigen Sie den Filter im Schlauch mit einer harten Bürste. 4. Schrauben Sie den Schlauch wieder an den Hahn an. Vergewissern Sie sich, dass der Anschluss in Ordnung ist. 5. Schrauben Sie den Schlauch vom Gerät ab. Halten Sie ein Tuch bereit, da möglicherweise etwas Wasser herausfließt. 6. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Lappen. 7.
Was tun, wenn … 23 Das Wasser fließt in den Behälter. Wenn der Behälter voll ist, stecken Sie den Stopfen wieder in den Schlauch. Entleeren Sie den Behälter. Wiederholen Sie den Vorgang, bis kein Wasser mehr herausfließt; 6. Falls nötig, reinigen Sie die Pumpe wie vorab beschrieben; 7. Verschließen Sie den Notentleerungsschlauch und schieben Sie ihn in die Maschine zurück; 8. Schließen Sie die Pumpenklappe und schließen Sie die Tür.
Was tun, wenn … Problem Mögliche Ursache/Abhilfe Die Waschmaschine startet nicht: Die Tür wurde nicht geschlossen. • Drücken Sie die Tür fest zu. Der Stecker ist nicht richtig in die Steckdose eingesteckt. • Stecken Sie den Stecker in die Steckdose. Die Steckdose wird nicht mit Strom versorgt. • Überprüfen Sie bitte die Elektroinstallation in Ihrem Haus. Die Hauptsicherung ist durchgebrannt. • Wechseln Sie die Sicherung aus.
Was tun, wenn … 25 Problem Mögliche Ursache/Abhilfe Das Gerät pumpt nicht ab und/oder schleudert nicht: Der Ablaufschlauch ist eingeklemmt oder geknickt. • Überprüfen Sie den Anschluss des Ablaufschlauchs. Der Ablauffilter ist verstopft. • Reinigen Sie den Ablauffilter. Es wurde eine Option oder ein Programm gewählt, das damit endet, dass noch Wasser in der Trommel steht, oder das auf alle Schleudergänge verzichtet. • Wählen Sie ein Abpump- oder Schleuderprogramm.
Was tun, wenn … Problem Mögliche Ursache/Abhilfe Die Waschergebnisse sind unbefriedigend: Sie haben zu wenig Waschmittel oder ein ungeeignetes Waschmittel benutzt. • Erhöhen Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Hartnäckige Flecken wurden nicht vorbehandelt. • Verwenden Sie zur Behandlung hartnäckiger Flecken handelsübliche Produkte. Falsche Temperatur ausgewählt. • Überprüfen Sie, ob Sie die korrekte Temperatur gewählt haben. Das Gerät ist überladen.
Was tun, wenn … Problem Das Schleudern beginnt erst spät oder gar nicht: 27 Mögliche Ursache/Abhilfe Die elektronische Unwuchterkennung hat eingegriffen, weil die Wäsche nicht gleichmäßig in der Trommel verteilt ist. Die Wäsche wird neu verteilt, indem die Trommel in die entgegengesetzte Richtung gedreht wird. Dieser Vorgang kann sich einige Male wiederholen, bevor die Unwucht verschwunden ist und das Schleudern fortgesetzt werden kann.
Technische Daten TECHNISCHE DATEN Abmessungen Breite Höhe Tiefe 60 cm 85 cm 63 cm Elektrischer Anschluss Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür. Wasserdruck Mindestens Maximal 0,05 MPa 0,8 MPa Max. Wäschemenge Koch-/Buntwäsche 6 kg Schleuderdrehzahl Maximal 1200 U/min(L 52840D) 1400 U/min(L 54840D) VERBRAUCHSWERTE Programm Energieverbrauch (KWh) Wasserverbrauch (in Liter) Weiße Kochwäsche 95° 2.0 61 Kochwäsche 60° 1.
Montage 29 MONTAGEANLEITUNG MONTAGE Auspacken Bevor das Gerät verwendet werden kann, müssen alle Transportsicherungen und Verpackungsmaterialien entfernt werden. Es empfiehlt sich, alle Transportsicherungen für eventuelle zukünftige Transporte des Gerätes aufzubewahren. 1. Legen Sie die Maschine nach Entfernen der Verpackung vorsichtig auf die Rückseite, um die Polystyrolplatte unter der Maschine zu entfernen. 2.
Montage 3. Lösen Sie die drei Schrauben. 4. Ziehen Sie die entsprechenden Kunststoff-Distanzstücke heraus. 5. Öffnen Sie die Tür und entnehmen Sie den Zulaufschlauch aus der Trommel sowie den Polystyrolblock, der an der Türdichtung befestigt ist.
Montage 31 6. Verschließen Sie das kleinere obere Loch und die beiden größeren Löcher mit den entsprechenden Kunststoffkappen, die sich im Beutel mit der Benutzerinformation befinden. 7. Schließen Sie den Wasserzulaufschlauch wie in Abschnitt "Wasserzulauf" beschrieben an. Aufstellen und Ausrichten Stellen Sie das Gerät auf einem ebenen, harten Boden auf. Stellen Sie sicher, dass die Luftzirkulation um die Maschine herum nicht durch Teppiche, Läufer usw. beeinträchtigt wird.
Montage 1. Öffnen Sie die Tür und ziehen Sie den Zulaufschlauch heraus. 2. Schließen Sie den Schlauch mit dem Winkelverbindungsstück an die Maschine an. Richten Sie den Zulaufschlauch nicht nach unten. Führen Sie den Schlauch in einem Winkel nach links oder rechts, je nach der Position des Wasserhahns. 3. Schließen Sie den Schlauch korrekt durch Lösen der Ringmutter an. Ziehen Sie die Ringmutter nach dem Positionieren des Zulaufschlauchs wieder fest, um Wasseraustritt zu vermeiden. 4.
Montage 33 Wasserstopp-Vorrichtung Der Wasserzulaufschlauch ist mit einer Wasserstopp-Vorrichtung als Schutz gegen Wasserschäden ausgestattet, die durch das natürliche Altern des Schlauchs auftreten können. Dieser Fehler wird durch ein rotes Feld im Sichtfenster "A" angezeigt. Sollte sich diese Störung einstellen, drehen Sie den Wasserhahn zu und lassen Sie vom Kundendienst den Schlauch ersetzen. A Wasserablauf MAX 100cm • Die Höhe des Ablaufschlauchs darf 100 cm nicht überschreiten.
Elektrischer Anschluss Sie können den Ablaufschlauch an ein Becken anschließen. Der Ablaufschlauch muss sich über dem Becken befinden. Befestigen Sie den Ablaufschlauch mit einer Klemme am Becken. Der Ablaufschlauch darf auf max. 4 Meter verlängert werden. Einen Verlängerungsschlauch und ein Verbindungsstück erhalten Sie bei unserem Kundendienst. ELEKTRISCHER ANSCHLUSS Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür.
Umwelttipps 35 WARNUNG! Falls das Netzkabel des Geräts ersetzt werden muss, muss dies durch unseren Kundendienst durchgeführt werden. UMWELTTIPPS Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss.
192990940-00-232010 www.aeg-electrolux.