LAVAMAT 64810 Lave-linge Notice d'utilisation
Chère cliente, cher client, Veuillez lire attentivement la notice d’utilisation dans son intégralité et la conserver pour pouvoir le consulter ultérieurement. Veuillez la transmettre à l’éventuel propriétaire ultérieur de l’appareil. 1 3 2 2 Les symboles suivants sont utilisés dans ce document : Consignes de sécurité Avertissement ! Conseils pour votre sécurité personnelle. Avertissement ! Consignes permettant d’éviter d’endommager l’appareil.
Sommaire Notice d'utilisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bandeau de commande . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Synoptique des programmes . . . . . . . . . . . . . . . . .
Instructions de montage et de raccordement . . . . . . . . . . . 29 Consignes de sécurité pour l’installateur . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Installation de l’appareil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transport de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enlevez les protections de transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Notice d'utilisation 1 Sécurité Avant la première mise en service • Veuillez respecter les “Instructions d’installation et de raccordement”. • Si votre appareil est livré au cours d’un mois d’hiver, lorsque la température est inférieure à 0°C: laissez le lave-linge dans un local à température ambiante pendant 24 heures avant de le mettre en service. Pour une utilisation réglementaire de l’appareil • Ce lave-linge est uniquement destiné à laver le linge domestique courant.
Consignes générales de sécurité • Les réparations du lave-linge sont du ressort exclusif de professionnels agréés et qualifiés. • N’utilisez jamais le lave-linge si le câble d’alimentation, le bandeau de commande, le plan de travail ou le socle sont à tel point endommagés que l’intérieur de l’appareil soit librement accessible. • Avant tous travaux de nettoyage, d’entretien ou de maintenance, mettez le lave-linge hors tension.
Description de l’appareil Bac-tiroir pour produits lessiviels Bandeau de commande Plaque signalétique (derrière le hublot) Pieds vissables (ajustables en hauteur) Trappe du socle/ Pompe de vidange Bandeau de commande Touche essorage/ARRÊT CUVE PLEINE Multiafficheur Touche DEPART DIFFERE Touches de programmes Voyant PORTE additionnels Touche MARCHE/PAUSE Affichage du déroulement du programme Programmateur 7
Synoptique des programmes 7kg • SYNTHETIQUE 60, 50, 40, 30, 20 3,5kg FACILE A REPASSER 40 LINGE DELICAT 40, 30 LAINE/SOIE H (lavage à la main) 40, 30, FROID RINCAGE DELICAT • • • • • •3) • •4) • • • • • • •4) • • 1kg • • • • • • 3,5kg • • • • • 2kg • • 3,5kg • • COURT ARRET CUVE PLEINE BLANC/COULEURS 95, 60, 50, 40, 30 1000/600 • 1400 7kg TACHES RINCAGE + ECONOMIQUE 2) Programme Vitesse d’essorage PRELAVAGE Charge max.
Utilisation/Caractéristiques Programme en mode économie d’énergie à 60 °C pour blanc/couleurs en coton/lin peu à normalement sale. Programme pour linge blanc/couleurs en coton/lin normalement sale à très sale. Programme pour textiles mélangés faciles d’entretien et pour synthétiques. Programme spécial à 40 °C pour textiles mélangés qui ne nécessitent pas de repassage ou seulement un repassage rapide après ce programme.
Signification des concepts Les références françaises utilisées dans cette notice d’information à l’intention de l’utilisateur correspondent aux désignations anglais reportées ci-dessous sur le bandeau de commande de l’appareil : Sélecteur des programmes Touches ARRET OFF ARRÊT CUVE PLEINE RINSE HOLD BLANC/ COULEURS COTTONS/ LINEN RINCAGE + RINSE + COURT TIME SAVER SYNTHETIQUE EASY-CARES PRELAVAGE PRE WASH TACHES STAIN MARCHE/PAUSE START/PAUSE DEPART DIFF.
Avant la toute première lessive 1. Ouvrez la boîte à produits. 2. Versez env. 1 litre d’eau dans le lave-linge par l’intermédiaire de la boîte à produits. Ainsi, lors du démarrage ultérieur du programme, la cuve à lessive sera fermée et l’écluse ECO pourra fonctionner correctement. 3. Effectuez une lessive préliminaire sans introduire de linge dans l’appareil afin d’éliminer d’éventuels résidus de fabrication susceptibles d’être restés dans le tambour ou dans la cuve à lessive.
Effectuer un cycle de lavage Ouvrir le hublot et insérer le linge. 1. Pour ouvrir le hublot : tirez sur la poignée.
Le dosage dépend : – du degré de salissure du linge, – de la quantité de linge, – du degré de dureté de l’eau. • Si le fabricant de lessive ne donne aucune indication d’utilisation en cas de petite quantité de linge : divisez le dosage de produit de lavage par trois pour une demi-charge et de moitié pour une charge minimale par rapport au dosage recommandé pour une pleine charge. • Il est recommandé d’utiliser un anticalcaire à partir du degré 2 de dureté de l’eau (moyen).
Mettrel’appareilsoustension/Sélectionnerunprogramme 3 Sélectionnez le programme et la température à l’aide du sélecteur de programmes. La sélection d’un programme de lavage active simultanément la mise sous tension de l’appareil. – L’afficheur du déroulement du programme indique les différents cycles de lavage du programme sélectionné. – L’afficheur indique la durée prévue du programme (en minutes).
Sélectionner des programmes additionnels 3 Si vous le souhaitez, appuyez sur la/ les touches du/des programme(s) additionnel(s). Le voyant correspondant s’allume. Si ”Err“ apparaît sur la fenêtre d'affichage, le programme additionnel sélectionné n’est pas compatible avec le programme de lavage choisi. RINCAGE+ Deux cycles de rinçage supplémentaires auront lieu avec les programmes ECONOMIQUE, BLANC/COULEURS, LINGE DELICAT, SYNTHETIQUE et FACILE A REPASSER (par ex.
Régler le départ différé 3 3 La touche DEPART DIFFERE permet de différer le départ d'un programme de 30 minutes (30) à 23 heures maximum (23h). 1. Sélectionner un programme. 2. Appuyez sur la touche DEPART DIFFERE jusqu’à ce que le délai de départ du programme souhaité s’affiche, par ex. 12 h, si le programme doit démarrer dans 12 heures. Le voyant DEPART DIFFERE s’allume. Lorsque 23 h s’affiche, appuyez de nouveau sur la touche pour annuler le départ différé.
Interrompre un programme/Ajouter du linge Interrompre un programme • La touche MARCHE/PAUSE permet à tout moment d’interrompre un programme puis de le poursuivre en appuyant de nouveau sur la touche MARCHE/PAUSE. • Pour arrêter prématurément un programme, positionnez le sélecteur de programmes sur ARRET. Attention ! Il y a de l’eau dans l'appareil ! Ajouter du linge Il est possible d’ajouter du linge tant que le voyant PORTE est vert. 1. Appuyez sur la touche MARCHE/PAUSE. Le hublot peut être ouvert. 2.
Sécurité enfants Lorsque la sécurité enfants est enclenchée, il est impossible de fermer le hublot. Pour activer la sécurité enfants : A l’aide d’une pièce de monnaie, tournez le bouton rotatif (situé à l’intérieur du hublot) dans le sens des aiguilles d’une montre jusqu’à la butée. 1 18 Avertissement ! Si après cette manipulation le bouton rotatif se trouve en position enfoncée, la sécurité enfants n’est pas enclenchée. Le bouton rotatif doit être positionné comme indiqué sur la figure.
Nettoyage et entretien Attention ! N’utilisez pas de produits d’entretien pour meubles ou des produits de nettoyage agressifs pour nettoyer l’appareil. Essuyez le bandeau de commande et le corps de l’appareil à l’aide d’un chiffon humide. Nettoyage Si vous lavez la plupart du temps à basse température, veuillez effectuer de temps en temps un programme á haute température (60 ou 90°). Ceci évite d’éventuels dépôts et l’appareil sera nettoyé de l’intérieur.
Tambour Des corps étrangers rouillés restés dans le linge ou des conduites d’eau ferrugineuses peuvent provoquer des dépôts de rouille dans le tambour. Attention ! Ne nettoyez pas le tambour avec des détartrants acides, avec des produits abrasifs contenant du chlore ou du fer ou avec de la laine de fer. 1. Eliminez les éventuels dépôts de rouille dans le tambour avec un produit de nettoyage pour acier inoxydable. 2.
Que faire, si… Réparer soi-même de petits dysfonctionnements Si, au cours d’un programme, l’un des messages d’erreur ci-après apparaît sur l’afficheur : – E10 (problème d’alimentation en eau), – E20 (problème de vidange d’eau), – E40 (ouvrir la porte), veuillez vous référer au tableau ci-après. Après avoir réparer la panne, appuyez sur la touche MARCHE/PAUSE. En cas de signalement d’autres erreurs (E suivi d’un chiffre ou d’une lettre) : mettez l’appareil hors tension puis de nouveau sous tension.
Symptômes E10 s’affiche. Le voyant FIN clignote 1 fois et un signal sonore retentit simultanément 1 fois. (problème d’arrivée d’eau) Le lave-linge vibre ou il est instable lorsqu’il est en marche. Cause possible Solution Le robinet d’arrivée d’eau est Ouvrez le robinet d’arrivée fermé. d’eau. Fermez le robinet d’arrivée le filtre du raccord du flexid’eau. Dévissez le flexible, ble d’arrivée d’eau est bouenlevez le filtre et nettoyezché. le.
Symptômes Cause possible Le flexible de vidange est plié. Solution Eliminez le pli. Dépassement de la hauteur Contactez le service aprèsde vidange maximale de 1m. vente. E20 s’affiche. Le voyant FIN clignote 2 fois et un signal sonore retentit simultanément La pompe de vidange est bouchée. 2 fois. (problème de vidange). L’adoucissant ne se diffuse pas dans le tambour, le compartiment w réservé aux additifs est rempli d’eau. Mettez l’appareil hors tension. Débranchez-le. Nettoyez la pompe de vidange.
Lorsque la qualité du lavage n’est pas satisfaisante Le linge est grisâtre et le tambour s’entartre • La quantité de produit de lavage est insuffisante. • Le produit de lavage utilisé n'est pas adéquat. • Les salissures spécifiques n’ont pas fait l’objet d’un traitement préalable. • Le programme ou la température sélectionné(e) ne convient pas.
Effectuez une vidange 1 Avertissement ! Avant de procéder à la vidange, mettez le lave-linge hors tension et débranchez-le ! Avertissement ! L’eau de vidange évacuée par le flexible de vidange peut être brûlante. Danger de brûlure par aspersion ! Laissez refroidir l’eau avant de faire la vidange ! 1. Abaissez la trappe du socle et enlevez-la. 2. Enlevez le flexible de vidange de secours. 3. Placez un récipient plat de récupération de l’eau sous la trappe.
Pompe de vidange 1 La pompe de vidange ne nécessite aucun entretien. Il n’est pas nécessaire d’ouvrir le couvercle de la pompe sauf en cas d'anomalie, lorsque la vidange ne s’effectue pas, par ex. en cas de blocage de la roue. Avant de faire une lessive, veuillez vous assurer qu’il n’y a pas de corps étrangers dans les poches des vêtements ou entre le linge. Les trombones, punaises, etc.
8. Fermez la trappe du socle. Protection de l’environnement 2 2 Elimination du matériel d’emballage Les matériaux d’emballage sont écologiques et recyclables. Les matières plastiques portent un signe distinctif, par ex. >PE<, >PS<, etc. Eliminez les matériaux d’emballage en fonction de leur signe distinctif dans les containeurs prévus à cet effet sur le site de collecte de votre commune.
Caractéristiques techniques 5 Cet appareil est conforme aux directives CE suivantes : – directive 73/23/CEE du 19.02.1973 basse tension – directive 89/336/CEE du 03.05.1989 relative à la compatibilité électromagnétique (CEM) y compris la directive de révision 92/31/CEE – directive 93/68/CEE du 22.07.1993 relative à la certification CE Hauteur x largeur x profondeur 850 x 598 x 640 mm Profondeur hublot ouvert 1 017 mm Réglage de la hauteur env. +10/-5mm Charge maximale (en fonction du programme) max.
Instructions de montage et de raccordement 1 Consignes de sécurité pour l’installateur • Cet appareil n’est pas encastrable. • Avant de mettre l’appareil en service, vérifiez qu’il n’a pas subi de dommages au cours du transport. Il est absolument interdit de brancher un appareil endommagé. En cas de dommage, veuillez contacter votre transporteur. • Avant de mettre l’appareil en service, enlevez toutes les protections de transport.
Installation de l’appareil Transport de l’appareil 1 Avertissement ! Le lave-linge est très lourd. Risque de blessures ! Le soulever avec précaution. • Ne pas poser l’appareil sur la face frontale ou sur le côté droit (vu de devant). Les éléments électriques peuvent se mouiller. • Ne jamais transporter l’appareil sans dispositif de sécurité.
2. Redressez l'appareil et retirez la fixation du câble d’alimentation électrique et du tuyau de vidange des leur support placé à l’arrière de l’appareil. 3. Avec la clé en dotation dévissez et ôtez la vis centrale arrière A, en haut. Enlevez avec soin le goujon en plastique correspondant. 4. Dévissez et ôtez les deux grandes vis arrière B et les six petites vis C, en bas.
5. Sortez le rail de transport D. 6. Revissez les six petites vis C à leur place (voir figure ci-desssous). 7. Ouvrez le hublot et enlevez le bloc en polystyrène accroché au joint du hublot. 8. Bouchez l’ ouverture centrale et les deux ouvertures (en bas) à l’aide des caches plastique se trouvant dans l’enveloppe contenant la notice d’utilisation. Avertissement ! Conservez ces dispositifs de sécurité: ils devront être remontés en cas de futur transport de l’appareil (déménagement par exemple).
portez jamais l’appareil sans les protections de transport. Branchez le tuyau d’alimentation de la façon décrite au paragraphe “Raccordement d’eau”. Préparer le lieu d’installation Avertissement ! Ne pas installer l’appareil dans une pièce où il est susceptible de geler. Risque de dommages dus au gel ou altération des fonctions de l’appareil ! Les dommages dus au gel ne sont pas couverts par la garantie ! • Le plan d’installation doit être stable et plat.
Raccordement de l’eau Pression d’eau admissible La pression d’eau admissible est d’au moins 1bar (=10N/cm2 =0,1MPa) et ne doit pas excéder 10bar (=100N/cm2 =1MPa). – Si la pression excède 10bar : installer une vanne de réduction de la pression en amont. – Si elle est inférieure à 1bar : dévisser le flexible d’arrivée d’eau côté appareil au niveau de l’électrovanne et enlever le régulateur de débit (pour ce faire, retirer le filtre à l’aide d’une pince pointue et extraire la bague en caoutchouc).
4. Vissez le raccord du tuyau d’alimentation sur le nez fileté du robinet d’arrivée d’eau (20x27). Utilisez toujours le tuyau d’alimentation livré avec l’appareil. Vissez correctement pour éviter toute fuite. Si le branchement se fait sur des tuyauteries neuves ou qui n’ont pas servi depuis longtemps, il est préférable de faire couler une certaine quantité d’eau avant de mettre en place le tuyau de remplissage.
Vidange de l’eau dans un siphon Fixer l’embout sur le siphon à l’aide d’un collier de serrage (disponible dans les magasins spécialisés). 1 Vidange de l’eau dans un évier/une baignoire Avertissement ! – Les petits éviers ne conviennent pas. L’eau risque de déborder ! – L’extrémité du flexible de vidange ne doit pas tremper dans l’eau de vidange.
Garantie/Si vous devez nous contacter Garantie/Si vous devez nous contacter EURO-LINE APPLIANCES VALIDITE DE LA GARANTIE : EURO-LINE PREND EN CHARGE : GARANTIE COMPLETE DE DEUX ANS Pièces de rechange et/ou main-d’oeuvre pour la réparation de vices de fabrication ou de matériaux. L’intervention doit être assurée par un atelier agréé Euro-Line (sauf spécifications contraires).
Euro-Line ne peut en aucun cas être tenue pour responsable de dommages secondai-res ou indirects. Pour les interventions d’assistance sous garantie et les pièces de rechange, contacter EURO-PARTS. L’assistance est assurée pendant les horaires de travail courants. En cas de problème d’assistance ne pouvant pas être résolu sur place, contacter : Pour l’assistance et les pièces de rechange, contacter : EURO-PARTS, USA EURO-PARTS, CANADA EURO-LINE APPLIANCES Tél.: 1-800-561-4614 Tél.
Service après-vente En cas d’anomalie de fonctionnemet vérifiez d’abord si vous ne pouvez pas remédier vous-même au dysfonctionnement à l’aide de la notice d’utilisation (chapitre “Que faire, si...“). Si vous ne parvenez pas à remédier au dysfonctionnement, veuillez contacter votre vendeur ou à défaut le Centre Contact Consommateurs qui vous communiquera l’adresse service après-vente.
www.electrolux.com www.aeg-electrolux.