LAVAMAT 64850LE Notice d'utilisation Lave-linge
Sommaire Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Consignes de sécurité Valeurs de consommation 28 Instructions d'installation 29 Installation Débridage Emplacement et mise à niveau Arrivée d'eau Dispositif d'arrêt de l'eau 29 29 31 32 33 3 Vidange de l'eau 33 Branchement électrique 34 En matière de protection de l'environnement 34 Matériaux d'emballage 35 Conseils écologiques 35 Sous réserve de modifications Notice d'utilisation Consignes de sécurité Veuillez lire attentivement cette notice et la conserver pour toute consultation future.
Consignes de sécurité • N'utilisez que les quantités de lessive et d'assouplissant indiquées par le fabricant. Une quantité excessive pourrait endommager le linge. Conformez-vous aux doses préconisées par les fabricants. • Groupez les petits articles, tels que les chaussettes, ceintures lavables en machine etc., dans un petit sac de toile ou une taie, afin d'éviter que ces pièces ne glissent entre le tambour et la cuve.
Description de l'appareil 5 • Les articles détachés à l'essence, à l'alcool, au trichloréthylène, etc., ne doivent pas être mis dans un lave-linge. Si de tels détachants sont utilisés avant le lavage en machine, il faudra attendre que le produit se soit évaporé avant d'introduire les articles dans l'appareil. • Le câble d'alimentation ne doit jamais être tiré au niveau du câble ; mais toujours au niveau de la prise.
Description de l'appareil 2 1 3 4 6 1 2 3 4 5 6 Boîte à produits Bandeau de commande Poignée d'ouverture du hublot Plaque signalétique Pompe de vidange Pieds réglables Boîte à produits Bac à lessive en poudre utilisée pendant le prélavage . La lessive de prélavage est ajoutée au début du programme de lavage. Lessive en poudre ou liquide pour le lavage principal . Additifs liquides : assouplissant, amidon. Détachant utilisé pour le lavage principal avec l'option TACHES .
Bandeau de commande Bandeau de commande Le bandeau de commandes est illustré ci-dessous. Il comprend : le sélecteur de programmes, les touches et les voyants. Ceux-ci sont signalés tout au long de la notice par les numéros auxquels ils se réfèrent. 1 2 1 Sélecteur de programmes 2 TEMPERATURE Touche 3 ESSORAGE Touche 4 taches Touche 5 PEAUX SENSIBLES Touche 6 TEMPS Touche 7 AFFICHAGE 8 DEPART/PAUSE Touche 9 DEPART DIFFERE Touche 10 Voyants Symboles : Arrêt cuve pleine, 3 4 5 Froid Affichage 7.
Durée du programme sélectionné (7.1) : Durée du programme sélectionné : Après la sélection d'un programme, la durée du programme s'affiche en heures et en minutes (par exemple 2.05 ). La durée est calculée automatiquement sur la base de la charge maximale recommandée pour chaque type de textile. Après le départ du programme, le temps restant est réactualisé toutes les minutes.
Personnalisation 9 reportez-vous au chapitre " Sélection d'un rinçage supplémentaire ". Personnalisation Signaux sonores Le lave-linge est doté d'un dispositif sonore qui retentit dans les cas suivants : • à la fin du cycle • en cas d'anomalie de fonctionnement. Appuyez simultanément sur les touches 3 et 4 pendant environ 6 secondes pour désactiver le signal sonore (le signal reste actif uniquement en cas d'alarme). Appuyez de nouveau sur ces deux touches pour réactiver le signal sonore.
Utilisation quotidienne 1. Tirez la boîte à produits jusqu'à la butée. Dosez la lessive en poudre, versez-la dans le compartiment pour le lavage principal et, si vous souhaitez effectuer un PRÉLAVAGE , versez la lessive dans le compartiment . Si vous souhaitez lancer un programme avec l'option taches , versez le détachant dans le compartiment marqué d'une flèche bleue . 2. Versez, si besoin, l'assouplissant dans le compartiment (sans dépasser le niveau MAX ). Refermez délicatement la boîte à produits.
Utilisation quotidienne 11 Sélection de la TEMPERATURE (touche 2) Lors de la sélection d'un programme, le lave-linge propose automatiquement la température par défaut proposée pour ce programme. Appuyez sur cette touche par pressions successives pour augmenter ou diminuer la température si vous souhaitez que votre linge soit lavé à une température différente de celle proposée par le lave-linge. La position (Froid), correspond au lavage à froid. À utiliser avec les articles extrêmement délicats, par ex.
Utilisation quotidienne Option SENSIBLES (Bouton 5) Si vous sélectionnez cette option, l'intensité du lavage sera réduite. Le lave-linge ajoute un rinçage dans les programmes BLANC COULEURS, 40-60 MIX, SYNTHETIQUES et ECO. Le symbole correspondant s'affiche. Cette fonction ne peut pas être sélectionnée avec l'option RINCAGE PLUS. Cette option est recommandée pour les articles de couleur fragiles et pour les lavages fréquents.
Utilisation quotidienne 13 Annulation du départ différé • Mettez le lave-linge en PAUSE en appuyant sur la touche 8 . • Appuyez une fois sur la touche 9 jusqu'à ce que le symbole s'affiche. • Appuyez de nouveau sur la touche 8 pour lancer le programme. • Le délai sélectionné ne peut être modifié qu'après avoir sélectionné de nouveau le programme de lavage. • Le hublot sera verrouillé jusqu'au moment du départ différé.
Conseils utiles Fin du programme Le lave-linge s'arrête automatiquement, le voyant de la touche 8 , les voyants 10.1 et 10.2 s'éteignent et un clignote dans la fenêtre d'affichage. Si à la fin du programme ou de l'option sélectionnée, l'eau reste dans la cuve, le voyant 10.2 s'allume, clignote dans la fenêtre d'affichage, le voyant de la touche 8 s'éteint et le hublot est verrouillé pour signaler que l'eau doit être vidangée avant d'ouvrir le hublot.
Conseils utiles 15 Taches de gras séchées : étalez le vêtement sur un chiffon propre et tamponnez avec de l'essence de térébenthine. Rouille : utilisez un produit anti-rouille en suivant attentivement les conseils du fabricant. Pour les vieilles taches, assurez-vous que la nature du textile supporte le produit. Taches de moisi : traitez avec un agent de blanchiment (blancs et couleur bon teint seulement).
Programmes de lavage Suivez les instructions du fabricant concernant les quantités à utiliser. Utilisez moins de lessive si : • vous lavez peu de linge • le linge n'est pas très sale • vous constatez qu'il y a trop de mousse pendant le lavage. Degrés de dureté de l'eau L'eau a plusieurs degrés de dureté. Vous obtiendrez le degré de dureté de votre eau en contactant la compagnie de distribution d'eau de votre région ou tout autre service compétent.
Programmes de lavage Programme Température maximale et minimale Description du cycle Charge maximale Type de linge Options JEANS 60° - Froid Lavage principal - Rinçages - Essorage long Charge max. 3,5 kg Programme spécial pour les pantalons et autres articles en jean. L'option RINÇAGE PLUS est automatiquement activée. ESSORAGE, ARRÊT CUVE PLEINE SYNTHETIQUES 60° - Froid Lavage principal - Rinçages - Essorage bref Charge max.
Programmes de lavage Programme Température maximale et minimale Description du cycle Charge maximale Type de linge LAINE PLUS (LAVAGE MAIN) / SOIE 40° - Froid Lavage principal - Rinçages - Essorage bref Laine/Lavage main : Charge max. 2 kg ; Soie : Charge max. 1 kg Programme de lavage pour la laine lavable en machine ainsi que pour les lainages lavables à la main et les tissus délicats portant la mention " Laver à la main ". Remarque : Un article seul ou volumineux peut provoquer un balourd.
Entretien et nettoyage Programme Température maximale et minimale Description du cycle Charge maximale Type de linge Options 19 Bac à lessive ESSORAGE, ARRÊT SUPER ECO CUVE PLEINE, RINÇAFroid GE PLUS Lavage principal - Rinçages - Essorage bref Charge max. 3 kg Tissus mélangés (coton et synthétiques). Lavage à l'eau froide conçu pour consommer peu d'eau, d'électricité et gagner du temps. Ce programme convient pour les lessives qui sont efficaces à basse température.
Entretien et nettoyage Après chaque lavage Laissez le hublot entrouvert après chaque utilisation. Ceci empêchera la formation de moisissures et de mauvaises odeurs à l'intérieur de l'appareil et permettra d'aérer la cuve. Entretien régulier Les lavages à basse température peuvent provoquer l'accumulation de résidus à l'intérieur du tambour. Nous vous conseillons d'effectuer un lavage d'entretien régulier. Procédez comme suit : • Le tambour doit être vide.
Entretien et nettoyage 21 1. Éliminez les dépôts de rouille à l'intérieur du tambour avec un produit de nettoyage pour acier inoxydable. 2. Effectuez un cycle de lavage sans linge pour éliminer les résidus de produits de nettoyage. Programme : bref programme pour Coton à température maximale auquel vous devez ajouter environ le quart d'une dose de lessive. Le joint du hublot Contrôlez régulièrement qu'il n'y ait pas de corps étrangers dans le joint d'étanchéité du hublot.
Entretien et nettoyage 6. Quand l'eau ne sort plus, dévissez le couvercle de la pompe et retirez-le. Conservez toujours à portée de main un chiffon pour essuyer l'eau qui s'écoule de la pompe lors du retrait du couvercle. 7. Enlevez les éventuels objets bloquant la pompe en la tournant comme indiqué. 8. Bouchez à nouveau le petit tuyau d'évacuation et remettez-le à sa place. 9. Revissez le couvercle de la pompe. 10. Fermez le volet.
Entretien et nettoyage 23 Nettoyage des filtres du tuyau d'arrivée d'eau Si vous remarquez que l'appareil n'est pas approvisionné en eau, met du temps à se remplir, que la touche de départ clignote en jaune ou qu'un message d'alarme s'affiche (si l'afficheur est disponible) (pour plus d'informations, voir le chapitre "En cas d'anomalie de fonctionnement..." ), les filtres sont peut-être obstrués. Pour nettoyer les filtres du tuyau d'arrivée d'eau : 1. Fermez le robinet d'arrivée d'eau. 2.
En cas d'anomalie de fonctionnement Vidange de secours Si l'appareil ne vidange pas, procédez de la façon suivante pour évacuer l'eau : 1. débranchez l'appareil ; 2. Fermez le robinet d'arrivée d'eau ; 3. si nécessaire, attendez que l'eau refroidisse ; 4. ouvrez le volet de la pompe ; 5. posez un récipient sur le sol, sortez et placez l'extrémité du petit tuyau d'évacuation dans le récipient. Enlevez le bouchon. L'eau s'écoulera par gravité dans le récipient.
En cas d'anomalie de fonctionnement Anomalie Le lave-linge ne démarre pas : 25 Cause possible/Solution Le hublot n'est pas fermé. • Fermez correctement le hublot. L'appareil n'est pas correctement branché. • Branchez l'appareil. La prise n'est pas alimentée. • Vérifiez votre installation électrique domestique. Le fusible de l'installation électrique a disjoncté. • Remplacez le fusible. Le sélecteur n'a pas été correctement positionné et la touche 8 n'est pas enclenchée.
En cas d'anomalie de fonctionnement Anomalie De l'eau s'est répandue au sol : Cause possible/Solution Vous avez utilisé trop de lessive ou une lessive qui n'est pas adaptée au lavage en machine (trop de mousse). • Réduisez la quantité de lessive ou utilisez une lessive plus adaptée. Vérifiez que les raccordements des tuyaux d'arrivée sont étanches. Il n'est pas toujours facile de voir si de l'eau s'écoule le long du tuyau ; vérifiez s'il est mouillé.
En cas d'anomalie de fonctionnement Anomalie 27 Cause possible/Solution L'appareil vibre ou est bruyant : Vous n'avez pas retiré l'emballage ou les dispositifs de protection utilisés pour le transport. • Vérifiez la bonne installation de l'appareil. Vous n'avez pas réglé les pieds. • Vérifiez si l'appareil est d'aplomb. La charge de linge n'est pas répartie uniformément dans le tambour. • Répartissez le linge dans le tambour. Il y a trop peu de linge dans le tambour. • Chargez plus de linge.
Caractéristiques techniques S'il n'est pas possible de remédier à l'anomalie ou de la localiser, contactez votre service après-vente. Lorsque vous appelez le service après-vente, indiquez le modèle, le numéro de série et la date d'achat de l'appareil : le centre aura besoin de ces informations.
Installation 29 Les données de consommation qui figurent dans le tableau sont fournies à titre indicatif, car elles peuvent varier en fonction de la quantité et du type de linge, de la température d'arrivée de l'eau ainsi que de la température ambiante. Elles se réfèrent à la température la plus élevée pour chaque programme.
Installation 2. Redressez l'appareil et retirez la fixation du câble d'alimentation électrique et du tuyau de vidange placée à l'arrière de l'appareil. 3. Dévissez les trois vis à l'aide de la clé fournie avec le lave-linge. 4. Enlevez avec soin les goujons en plastique correspondants.
Installation 31 5. Ouvrez le hublot, sortez le tuyau d'arrivée d'eau du tambour et enlevez le bloc en polystyrène fixé sur le joint du hublot. 6. Bouchez l'ouverture centrale supérieure et les deux ouvertures en bas à l'aide des caches en plastique correspondants, placés à l'intérieur de l'enveloppe contenant la notice d'utilisation. 7. Raccordez le tuyau d'arrivée d'eau comme indiqué au paragraphe "Arrivée d'eau". Emplacement et mise à niveau Placez l'appareil sur un sol plat et dur.
Installation Le lave-linge ne doit jamais être installé dans un local où la température peut être inférieure à 0°C. Le tuyau d'arrivée d'eau et le tuyau de vidange ne doivent pas être pliés. Une fois installé, assurez-vous que l'appareil est d'accès facile afin de permettre à un technicien de le réparer dans l'éventualité d'une panne. Placez l'appareil à l'endroit choisi et procédez soigneusement à la mise à niveau, en agissant sur les vérins prévus à cet effet.
Installation 33 permettre le fonctionnement sûr de ce lave-linge dans le chapitre " Caractéristiques techniques ". Dispositif d'arrêt de l'eau Le tuyau d'alimentation est équipé d'un dispositif de protection contre les dégâts des eaux. Si le tuyau inférieur devait se détériorer à cause d'une usure naturelle, ce dispositif bloquera l'arrivée d'eau à l'appareil. Ce défaut est signalé par l'apparition d'un secteur rouge dans la fenêtre " A " .
Branchement électrique Le tuyau de vidange peut être allongé jusqu'à 4 mètres maximum. Un tuyau de vidange supplémentaire et un raccord sont disponibles auprès de votre service après-vente. L'inobservation de ces règles pourrait entraîner un fonctionnement anormal de votre appareil. Branchement électrique Les informations concernant le branchement électrique figurent sur la plaque signalétique apposée sur le bord intérieur du hublot de l'appareil.
Pour obtenir plus de détails sur le recyclage de ce produit, veuillez prendre contact avec les services de votre commune ou le magasin où vous avez effectué l'achat. Matériaux d'emballage Tous les matériaux marqués du symbole sont recyclables. >PE<=polyéthylène >PS<=polystyrène >PP<=polypropylène Vous pouvez les déposer dans des conteneurs de collecte adaptés pour qu'ils puissent être recyclés.
www.electrolux.com 132951890-00-382009 Vous pouvez commander des accessoires, consommables et pièces détachées via notre magasin online sur: www.aeg-electrolux.