LAVAMAT 64880L Benutzerinformation Waschmaschine
Inhalt Danke, dass Sie sich für eines unserer hochqualitativen Produkte entschieden haben. Lesen Sie für eine optimale und gleichmäßige Leistung Ihres Gerätes diese Benutzerinformation bitte sorgfältig durch. Sie wird Ihnen helfen, alle Vorgänge perfekt und äußerst effizient zu steuern. Damit Sie diese Benutzerinformation bei Bedarf stets zur Hand haben, empfehlen wir Ihnen, sie an einem sicheren Ort aufzubewahren.
Sicherheitshinweise Gerät aufstellen Auspacken Aufstellen und Ausrichten Wasserzulauf Wasserstopp-Vorrichtung Wasserablauf 30 30 32 33 34 34 Installation unter einer Arbeitsplatte Elektrischer Anschluss Umwelttipps Verpackungsmaterial Umwelttipps 3 35 36 36 37 37 Änderungen vorbehalten Gebrauchsanweisung Sicherheitshinweise Bitte sorgfältig lesen und für zukünftige Verwendung aufbewahren.
Sicherheitshinweise • Benutzen Sie Ihre Waschmaschine nicht zum Waschen von Materialien ohne Saum oder zerrissenen Stoffen. • Nach dem Waschen und zum Reinigen und Warten der Maschine sollten Sie immer den Netzstecker ziehen und den Wasserhahn zudrehen. • Versuchen Sie unter keinen Umständen, das Gerät selbst zu reparieren. Reparaturen durch unerfahrene Personen können zu Verletzungen und schweren Funktionsstörungen führen. Wenden Sie sich an Ihren Kundendienst.
Gerätebeschreibung 5 • Benutzen Sie die Waschmaschine niemals, wenn das Netzkabel beschädigt ist, oder die Bedienblende, die Arbeitsplatte oder der Sockel so beschädigt sind, dass das Innere der Waschmaschine frei liegt.
Bedienblende 2 1 3 4 5 6 1 2 3 4 5 6 Waschmittelschublade Bedienblende Türgriff Typenschild Laugenpumpe Einstellbare Füße Waschmittelschublade Waschmittelfach für Vorwäsche . Das Vorwaschmittel wird zu Beginn des Waschprogramms eingespült. Fach für Waschpulver oder Flüssigwaschmittel für den Hauptwaschgang . Fach für flüssige Pflegemittel (Weichspüler, Stärke). Fach für Fleckentferner für den Hauptwaschgang mit FLECKEN-Option . Bedienblende Nachstehend ist die Bedienblende abgebildet.
Display-Anzeige 1 1 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 8 9 10 Programm-Wahlschalter Temperatur-Taste ( TEMP.) Taste Schleuderdrehzahl ( U/MIN.) Flecken-Taste (FLECKEN) Sensitiv-Taste ( SENSITIV) Zeitsparen-Taste ( ZEITSPAREN) Display Start/Pause-Taste ( START/PAUSE) Startzeitvorwahl-Taste ( ZEITVORWAHL) Kontrolllampen Symbole: Handwäsche; Kindersicherung. Display-Anzeige 7.2 7.3 7.1 Dauer des ausgewählten Programms (7.
der maximal empfohlenen Beladung für jede Wäscheart errechnet. Nach dem Programmstart wird die verbleibende Zeit im Minutentakt aktualisiert. Alarmcodes Bei einer Funktionsstörung kann die Maschine verschiedene Alarmcodes ausgeben, zum (Siehe den Abschnitt "Was tun, wenn..."). Beispiel Programmende Nach Abschluss des Programms wird eine blinkende Null angezeigt, die TÜR (DEUR) Kontrolllampe ( 10.2 ), die HAUPTWASCHEN (HOOFDWAS) Kontrolllampe ( 10.
Erste Inbetriebnahme 9 Erste Inbetriebnahme • Achten Sie darauf, dass der elektrische Anschluss und der Wasseranschluss der Installationsanweisung entsprechen. • Entfernen Sie den Polystyrolblock und alles andere Material aus der Trommel. • Gießen Sie zwei Liter Wasser in das Fach für den Hauptwaschgang der Waschmittelschublade zur Aktivierung der ÖKO- Schleuse.
Täglicher Gebrauch Täglicher Gebrauch Einlegen der Wäsche 1. Öffnen Sie die Tür, indem Sie den Türgriff behutsam nach außen ziehen. Legen Sie die Wäsche Stück für Stück lose in die Trommel. 2. Drücken Sie die Tür fest zu. Das Schloss muss hörbar einrasten. WARNUNG! Achten Sie darauf, dass die Wäsche nicht zwischen Tür und Gummidichtung eingeklemmt wird. Messen Sie Waschmittel und Weichspüler ab Ihr neues Gerät wurde speziell für die Einsparung von Wasser, Energie und Waschmittel konstruiert. 1.
Täglicher Gebrauch 11 2. Falls erforderlich, füllen Sie Weichspüler in das Fach mit der Markierung (die verwendete Menge darf die Markierung MAX in der Schublade nicht übersteigen). Schließen Sie die Waschmittelschublade vorsichtig. Wählen Sie das gewünschte Programm mit dem Programm-Wahlschalter (1) Sie können das richtige Programm für jede Art von Wäsche anhand der Beschreibungen in den Waschprogrammtabellen auswählen (siehe "Waschprogramme").
Täglicher Gebrauch Wählen Sie die SCHLEUDERDREHZAHL oder die Option SPÜLSTOPP (Taste 3) Wurde das gewünschte Programm gewählt, dann schlägt Ihr Gerät automatisch die maximale Schleuderdrehzahl für dieses Programm vor. Wenn Sie mit einer anderen Drehzahl als der vorgeschlagenen schleudern möchten, drücken Sie die Taste 3 wiederholt. Die entsprechende LED leuchtet auf. SPÜLSTOPP: Bei Spülstopp wird das Wasser des letzten Spülgangs nicht abgepumpt, so dass die Wäschestücke möglichst wenig knittern.
Täglicher Gebrauch 13 Zeit getragen wurde, weiter reduziert. Die reduzierte Waschdauer wird auf der Anzeige angezeigt. Wählen Sie START/PAUSE (Taste 8) Zum Starten des ausgewählten Programms drücken Sie Taste 8 ; die entsprechende rote Kontrolllampe erlischt. Die Kontrolllampe 10.1 leuchtet und zeigt damit an, dass das Gerät zu arbeiten beginnt. Die Kontrolllampe 10.2 leuchtet auf und zeigt damit an, dass die Tür verriegelt ist.
Täglicher Gebrauch Wählen Sie einen zusätzlichen Spülgang Dieses Gerät ist so konstruiert, dass es nur wenig Wasser verbraucht. Allerdings kann es für Menschen mit besonders empfindlicher Haut (Waschmittelallergie) erforderlich sein, die Wäsche extra zu spülen (Extraspülen). Drücken Sie gleichzeitig die Tasten 2 und 3 für einige Sekunden: die Kontrolllampe 10.3 leuchtet auf. Diese Funktion bleibt permanent eingeschaltet. Zum Löschen drücken Sie diese Tasten erneut, bis die Kontrolllampe 10.3 erlischt.
Spülprogramme • Verringern Sie bei Bedarf die Schleuderdrehzahl durch entsprechendes Drücken der Taste • Drücken Sie Taste 8 • Wenn das Programm beendet ist, blinkt die Anzeige . Die Kontrolllampe 10.2 erlischt, und die Tür kann geöffnet werden. Drehen Sie den Programm-Wahlschalter auf , um das Gerät abzuschalten. Nehmen Sie die Wäsche heraus und prüfen Sie sorgfältig, ob die Trommel leer ist. Wenn Sie keinen weiteren Waschgang starten möchten, schließen Sie den Wasserhahn.
Spülprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart PFLEGELEICHT 60°C - Kalt Hauptwäsche - Spülgänge - Kurzer Schleudergang Max. Beladung 3,5 kg - Verringerte Beladung 2 kg Synthetik- oder Mischgewebe: Unterwäsche, farbige Textilien, bügelfreie Hemden, Blusen.
Spülprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart FEINSPÜLEN Spülgänge - Kurzer Schleudergang Max. Beladung 7 kg Mit diesem Programm lassen sich Baumwoll-Wäschestücke spülen und schleudern, die mit der Hand gewaschen wurden. Das Gerät führt einige Spülgänge durch, anschließend erfolgt ein letzter Schleudergang. Die Schleuderdrehzahl kann durch Drücken der entsprechenden Taste reduziert werden.
Praktische Tipps und Hinweise Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen Waschmittel Fach /OFF Zum Abbrechen des laufenden Programms und zum Ausschalten des Geräts . 1) die Option FLECKEN kann nur bei Temperaturen von 40°C oder höher angewählt werden. 2) Wenn Sie die Option EXTRA KURZ durch Drücken der Taste 6 wählen, empfehlen wir Ihnen die Reduzierung der maximalen Beladung wie angezeigt.
Praktische Tipps und Hinweise 19 Rost: Verwenden Sie in heißem Wasser gelöste Oxalsäure oder einen Rostentferner im kalten Zustand. Bei älteren Rostflecken wurde wahrscheinlich bereits die Gewebestruktur beschädigt und es können sich leicht Löcher bilden. Schimmelflecken: Behandeln Sie Schimmelflecken mit Bleichmittel und spülen Sie das Gewebe gründlich aus (nur Kochwäsche und farbechte Buntwäsche).
Reinigung und Pflege Beachten Sie die Anweisungen der Waschmittelhersteller bezüglich der Waschmittelmengen. Verwenden Sie weniger Waschmittel, wenn: • Sie nur eine kleine Wäschemenge waschen • die Wäsche nur leicht verschmutzt ist • sich während des Waschvorgangs große Mengen Schaum bilden. Wasserhärte Die Wasserhärte ist in sogenannte "Wasserhärtebereiche" eingeteilt. Informationen zur Wasserhärte an Ihrem Wohnort erhalten Sie beim Wasserwerk oder bei Ihrer Gemeindeverwaltung.
Reinigung und Pflege 21 Waschmittelschublade Die Schublade für das Waschpulver muss regelmäßig gereinigt werden. 1. Entnehmen Sie die Schublade, indem Sie sie mit kräftigem Ruck herausziehen. 2. Entfernen Sie den Einsatz für Zusatzmittel aus dem mittleren Fach. 3. Alle Teile mit Wasser reinigen. 4. Den Einsatz für Zusatzmittel bis zum Anschlag aufstecken, so dass er fest sitzt. 5.
Reinigung und Pflege Türdichtung Kontrollieren Sie regelmäßig die Türdichtung und entfernen Sie eventuelle Fremdkörper aus den Falten. Laugenpumpe Die Pumpe sollte regelmäßig überprüft werden, insbesonders, wenn: • die Maschine nicht abpumpt und/oder schleudert • die Maschine beim Abpumpen ungewöhnliche Geräusche macht, weil Sicherheitsnadeln, Münzen o.ä. die Pumpe blockieren. Gehen Sie hierzu folgendermaßen vor: 1. Ziehen Sie den Netzstecker aus der Steckdose. 2.
Reinigung und Pflege 6. 7. 8. 23 Wenn kein Wasser mehr abläuft, schrauben Sie den Deckel der Laugenpumpe entgegen dem Uhrzeigersinn auf und ziehen ihn heraus. Halten Sie stets einen Lappen bereit, um austretendes Wasser beim Abnehmen des Deckels aufzuwischen. Drehen Sie den Pumpenflügel und entfernen Sie dabei vorhandene Fremdkörper. Verschließen Sie den Notentleerungsschlauch und schieben Sie den Schlauch wieder in die Maschine. 9. Schrauben Sie den Deckel wieder fest ein. 10.
Reinigung und Pflege 1. Schließen Sie den Wasserhahn. 2. Schrauben Sie den Schlauch vom Hahn ab. 3. Reinigen Sie den Filter im Schlauch mit einer harten Bürste. 4. Schrauben Sie den Schlauch wieder an den Hahn an. Vergewissern Sie sich, dass der Anschluss in Ordnung ist. 5. Schrauben Sie den Schlauch vom Gerät ab. Halten Sie stets einen Lappen bereit, um eventuell austretendes Wasser aufzuwischen. 6. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Lappen. 7.
Was tun, wenn … 25 Das Wasser fließt in den Behälter. Wenn der Behälter voll ist, stecken Sie den Stopfen wieder in den Schlauch. Entleeren Sie den Behälter. Wiederholen Sie den Vorgang, bis kein Wasser mehr herausfließt; 6. Falls nötig, reinigen Sie die Pumpe wie vorab beschrieben; 7. Verschließen Sie den Notentleerungsschlauch und schieben Sie ihn in die Maschine zurück; 8. Schließen Sie die Pumpenklappe und schließen Sie die Tür.
Was tun, wenn … Störung Mögliche Ursache/Abhilfe Die Waschmaschine startet nicht: Die Tür ist nicht richtig geschlossen. • Drücken Sie die Tür fest zu. Der Stecker ist nicht richtig in die Steckdose eingesteckt. • Stecken Sie den Stecker in die Steckdose. Die Steckdose wird nicht mit Strom versorgt. • Überprüfen Sie bitte die Elektroinstallation in Ihrem Haus. Die Hauptsicherung ist durchgebrannt. • Tauschen Sie die Sicherung aus.
Was tun, wenn … 27 Störung Mögliche Ursache/Abhilfe Das Gerät pumpt nicht ab und/oder schleudert nicht: Der Ablaufschlauch ist gequetscht oder geknickt. • Überprüfen Sie den Anschluss des Ablaufschlauchs. Der Ablauffilter ist verstopft. • Reinigen Sie den Ablauffilter. Es wurde eine Option oder ein Programm gewählt, das damit endet, dass noch Wasser in der Trommel steht, oder das auf den Schleudergang verzichtet. • Deaktivieren Sie diese Zusatzfunktion. • Wählen Sie ein Abpump- oder Schleuderprogramm.
Was tun, wenn … Störung Mögliche Ursache/Abhilfe Die Waschergebnisse sind unbefriedigend: Sie haben zu wenig Waschmittel oder ein ungeeignetes Waschmittel benutzt. • Erhöhen Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Hartnäckige Flecken wurden nicht vorbehandelt. • Verwenden Sie zur Behandlung hartnäckiger Flecken handelsübliche Produkte. Die falsche Temperatur wurde ausgewählt. • Überprüfen Sie, ob Sie die korrekte Temperatur gewählt haben. Das Gerät ist überladen.
Technische Daten Störung 29 Mögliche Ursache/Abhilfe Dieses Gerät ist mit einem Motor ausgestattet, der neben den bekannten Geräuschen herkömmlicher Motoren noch ein anderes, ungewohntes Geräusch macht. Dieser neue Motor Das Gerät macht ungewöhnliche Geräusche: sorgt für einen weicheren Anlauf und eine gleichmäßigere Verteilung der Wäsche in der Trommel während des Schleuderns sowie für eine bessere Stabilität des Geräts.
Verbrauchswerte Verbrauchswerte Programm Energieverbrauch (KWh) Wasserverbrauch (in Liter) Koch/Buntwäsche 95°C 2.1 65 Koch/Buntwäsche 60°C 1.4 60 Energiesparen 60°C 1) 1.19 49 Koch/Buntwäsche 40 °C 0.77 60 Pflegeleicht 40 °C 0.6 54 Feinwäsche 40 °C 0.6 63 Wolle/Handwäsche 30 °C 0.25 55 Programmdauer (in Minuten) Die Dauer der einzelnen Programme entnehmen Sie bitte der Anzeige an der Bedienblende.
Gerät aufstellen 2. Entnehmen Sie das Stromkabel und den Ablaufschlauch aus den Schlauchhalterungen auf der Geräterückseite. 3. Lösen Sie die drei Schrauben. 4. Ziehen Sie die entsprechenden Kunststoff-Distanzstücke heraus.
Gerät aufstellen 5. Öffnen Sie die Tür und entnehmen Sie den Zulaufschlauch aus der Trommel sowie den Polystyrolblock, der mit Klebeband an der Türdichtung befestigt ist. 6. Verschließen Sie das kleinere obere Loch und die beiden größeren Löcher mit den entsprechenden Kunststoffkappen, die sich im Beutel mit der Benutzerinformation befinden. 7. Schließen Sie den Wasserzulaufschlauch wie in Abschnitt "Wasserzulauf" beschrieben an.
Gerät aufstellen 33 Die Maschine darf nicht in Räumen aufgestellt werden, in denen die Temperatur unter 0°C fallen kann. Wasserzulauf- und Ablaufschlauch dürfen nicht geknickt oder eingeklemmt werden. Achten Sie beim Installieren des Geräts darauf, dass es im Fall einer Störung für den Techniker gut zugänglich ist. Richten Sie das Gerät genau waagerecht aus, indem Sie die Schraubfüße weiter heraus oder hinein schrauben.
Gerät aufstellen Wasserstopp-Vorrichtung Der Wasserzulaufschlauch ist mit einer Wasserstopp-Vorrichtung als Schutz gegen Wasserschäden ausgestattet, die durch das natürliche Altern des Schlauchs auftreten können. Dieser Fehler wird durch ein rotes Feld im Sichtfenster "A" angezeigt. Sollte sich diese Störung einstellen, drehen Sie den Wasserhahn zu und lassen Sie vom Kundendienst den Schlauch ersetzen. Wasserablauf MAX 100cm • Die Höhe des Ablaufschlauchs darf 100 cm nicht überschreiten.
Gerät aufstellen 35 Sie können den Ablaufschlauch an ein Becken anschließen. Der Ablaufschlauch muss sich über dem Becken befinden. Befestigen Sie den Ablaufschlauch mit einer Klemme am Becken. Der Ablaufschlauch darf auf max. 4 Meter verlängert werden. Einen Verlängerungsschlauch und ein Verbindungsstück erhalten Sie bei unserem Kundendienst.
Elektrischer Anschluss 600 820 600 Elektrischer Anschluss Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür. Vergewissern Sie sich, dass die Stromversorgung in Ihrem Haus für die erforderliche Maximallast geeignet ist. Berücksichtigen Sie dabei auch die anderen Elektrogeräte, die Sie verwenden. WARNUNG! Das Gerät an eine geerdete Steckdose anschließen.
erhalten Sie von Ihrem Rathaus, Ihrer Müllabfuhr oder dem Geschäft, in dem Sie das Produkt gekauft haben. Verpackungsmaterial Materialien mit dem Symbol sind wiederverwertbar. >PE<=Polyethylen >PS<=Polystyrol >PP<=Polypropylen Solche Materialien können der Wiederverwertung zugeführt werden, indem sie ordnungsgemäß in den entsprechenden Sammelbehältern entsorgt werden.
www.electrolux.com 132952780-00-382009 Benötigen Sie Zubehör, Verbrauchsmaterial und Ersatzteile? Dann besuchen Sie bitte unseren Onlineshop unter: www.aeg-electrolux.