LAVAMAT 73742 VI Benutzerinformation Waschmaschine
Inhalt Danke, dass Sie sich für eines unserer hochqualitativen Produkte entschieden haben. Lesen Sie für eine optimale und gleichmäßige Leistung Ihres Gerätes diese Benutzerinformation bitte sorgfältig durch. Sie wird Ihnen helfen, alle Vorgänge perfekt und äußerst effizient zu steuern. Damit Sie diese Benutzerinformation bei Bedarf stets zur Hand haben, empfehlen wir Ihnen, sie an einem sicheren Ort aufzubewahren.
Sicherheitshinweise 3 Installationsanleitung 32 Elektrischer Anschluss Gerät aufstellen Auspacken Aufstellen und Ausrichten Wasserzulauf Wasserstopp-Vorrichtung Wasserablauf 32 32 34 35 36 36 Einbau 38 Umweltschutz Verpackungsmaterial Umwelttipps 40 40 40 37 Änderungen vorbehalten Gebrauchsanweisung Sicherheitshinweise Bitte sorgfältig lesen und für zukünftige Verwendung aufbewahren.
Sicherheitshinweise • Benutzen Sie Ihre Waschmaschine nicht zum Waschen von Materialien ohne Saum oder zerrissenen Stoffen. • Nach dem Waschen und zum Reinigen und Warten der Maschine sollten Sie immer den Netzstecker ziehen und den Wasserhahn zudrehen. • Versuchen Sie unter keinen Umständen, das Gerät selbst zu reparieren. Reparaturen durch unerfahrene Personen können zu Verletzungen und schweren Funktionsstörungen führen. Wenden Sie sich an Ihren Kundendienst.
Gerätebeschreibung 5 • Bevor die Wäsche in die Maschine geladen wird, muss unbedingt sichergestellt werden, dass sich keine Feuerzeuge mehr in der Kleidung befinden. • Trocknen Sie niemals Wäschestücke im Trockner, die mit Chemikalien wie Trockenreinigungsflüssigkeiten in Berührung gekommen sind. Diese können gasförmig werden und eine Explosion verursachen. Trocknen Sie nur Wäschestücke im Trockner, die in Wasser gewaschen wurden, oder die durchgelüftet werden sollen.
Gerätebeschreibung 2 1 3 4 5 6 1 2 3 4 5 6 Waschmittelschublade Bedienblende Türgriff Typenschild Laugenpumpe Einstellbare Füße Fach für Waschmittel oder Fleckentferner. Das Vorwaschmittel wird zu Beginn des Waschprogramms eingespült. Der Fleckentferner wird während der FLECKENBehandlungsphase im Hauptwaschgang zugefügt. Fach für Waschpulver oder Flüssigwaschmittel für den Hauptwaschgang . Fach für flüssige Pflegemittel (Weichspüler, Stärke).
Bedienblende 7 Bedienblende Nachstehend ist eine Bedienblende abgebildet. Sie zeigt den Programm-Wahlschalter, die verschiedenen Tasten und das Display. Diese werden auf den folgenden Seiten durch die entsprechenden Nummern aufgeführt. 9 1 1 2 3 4 5 6 7 8 9 2 3 4 5 6 7 8 Programm-Wahlschalter TEMPERATUR-Taste (TEMP.
• Die Programmablauf-Anzeige zeigt die einzelnen Phasen des ausgewählten Waschprogramms an. • Während des Programmablaufs blinkt eine schwarze Linie unter dem Symbol für die aktuelle Programmphase. Am Ende jeder Waschphase leuchtet die Linie unter dem entsprechenden Symbol kontinuierlich. Wenn die Kontrolllampe für das Symbol ÜBERDOSIERUNG am Programmende aufleuchtet, zeigt dies an, dass zu viel Waschmittel verwendet wurde. 9.4 - Optionen: VORWÄSCHE , FLECKEN , SENSITIV , EXTRASPÜLEN 9.
Erste Inbetriebnahme 9 Erste Inbetriebnahme • Achten Sie darauf, dass der elektrische Anschluss und der Wasseranschluss der Installationsanweisung entsprechen. • Entfernen Sie den Polystyrolblock und alles andere Material aus der Trommel. • Starten Sie vor dem ersten Waschgang ein Programm für Koch-/Buntwäsche mit der höchsten Temperatur ohne Wäsche, um alle fertigungsbedingten Rückstände aus der Trommel und der Wanne zu entfernen.
Täglicher Gebrauch Täglicher Gebrauch Einlegen der Wäsche 1. Öffnen Sie die Tür, indem Sie den Türgriff behutsam nach außen ziehen. Legen Sie die Wäsche Stück für Stück lose in die Trommel. 2. Drücken Sie die Tür fest zu. Das Schloss muss hörbar einrasten. WARNUNG! Achten Sie darauf, dass die Wäsche nicht zwischen Tür und Gummidichtung eingeklemmt wird. Messen Sie Waschmittel und Pflegemittel ab Ihr neues Gerät wurde speziell für die Einsparung von Wasser, Energie und Waschmittel konstruiert. 1.
Täglicher Gebrauch 11 Wählen Sie das gewünschte Programm mit dem Programm-Wahlschalter (1) Sie können das richtige Programm für jede Art von Wäsche anhand der Beschreibungen in den Waschprogrammtabellen auswählen (siehe "Waschprogramme"). Drehen Sie den Programm-Wahlschalter auf das gewünschte Programm. Mit dem Programm-Wahlschalter legen Sie je nach Wäschetyp das geeignete Waschprogramm (z. B. Wasserstand, Trommelbewegung, Anzahl der Spülgänge) und die Temperatur beim Waschen fest.
Täglicher Gebrauch günstigeren Stromkosten eingestellt werden. Bei einigen Programmen werden die Spülgänge mit mehr Wasser durchgeführt. Am Ende des Programms und das Symbol SPÜLSTOPP erscheint auf dem Display, das TÜR Symbol (Tür verriegelt) leuchtet weiterhin, die Kontrolllampe von Taste 7 erlischt, und die Tür ist verriegelt, um anzuzeigen, dass zuerst das Wasser abgepumpt werden muss. Zum Abpumpen des Wassers lesen Sie bitte das Kapitel "Am Programmende".
Täglicher Gebrauch 13 Option SENSITIV Wenn Sie diese Option wählen, wird die Waschintensität reduziert. Das Gerät führt einen zusätzlichen Spülgang in den Programmen für Koch-/Buntwäsche und Pflegeleicht aus. Das entsprechende Symbol erscheint auf dem Display. Die Option kann nicht mit der Option Extra Spülen gewählt werden. Diese Option wird für Buntwäsche und für Wäsche empfohlen, die häufig gewaschen wird.
Täglicher Gebrauch Die gewählte Startzeitvorwahl wird auf dem Display einige Sekunden lang eingeblendet, dann wird wieder die Dauer des zuvor gewählten Programms angezeigt. Wählen Sie zuerst das Programm, dann diese Option und drücken Sie dann die Taste 7 . Sie können die Startzeitvorwahl jederzeit abbrechen oder ändern, bevor Sie die Taste 7 drücken. Während der gesamten Zeit der Startzeitvorwahl bleibt die Tür verriegelt.
Waschprogramme 15 • Wenn Sie die Tür trotzdem öffnen müssen, müssen Sie die Maschine ausschalten, indem Sie den Programm-Wahlschalter auf drehen. Nach einigen Minuten kann die Tür geöffnet werden (Achten Sie auf Wasserstand und Temperatur!) ; Nach dem Schließen der Tür ist es erforderlich, das Programm erneut auszuwählen und die Taste 7 zu drücken.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen U/MIN / NACHTPRO40- 60 MIX GRAMM / SPÜL40° STOPP, VORWÄHauptwäsche - Spülgänge - Langer Schleudergang Max. Schleuderdrehzahl 1400 U/min SCHE1), FLECKEN, Max. Beladung 6 kg SENSITIV, EXTRASPÜWeiße und bunte Baumwolle Dieses Programm LEN kann für Wäsche verwendet werden, die bei 40°C oder 60°C separat gewaschen werden sollte.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart FEINWÄSCHE (FIJNE WAS - DELICATS) 40°- Kalt Hauptwäsche - Spülgänge - Kurzer Schleudergang Maximale Schleuderdrehzahl 1200 U/min Max. Beladung kg 3 - Reduziert. Beladung kg 1,5 Zarte Gewebe: Akryl, Viskose, Polyester. FEINSPÜLEN (KORT SPOELEN - RINCAGES DELICATS) Spülgänge - Kurzer Schleudergang Maximale Schleuderdrehzahl 1200 U/min Max.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen SCHONSCHLEUDERN(KORT CENTRIF. ESSORAGE DELICAT) U/MIN WOLLE PLUS / HANDWÄSCHE (WOL PLUS LAINE PLUS) U/MIN / NACHTPROGRAMM / SPÜLSTOPP Abpumpen und kurzes Schleudern Maximale Schleuderdrehzahl 1200 U/min Max.
Praktische Tipps und Hinweise Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Schleuderdrehzahl Max. Wäschemenge Wäscheart Optionen AUFFRISCHEN (OPFRISSEN - RAFRAICHIR) U/MIN ENERGIESPAREN (ECO - ECONOMIQUE) U/MIN / NACHTPROGRAMM / SPÜLSTOPP, VORWÄSCHE1), FLECKEN, SENSITIV, EXTRASPÜLEN 30° Hauptwäsche - Spülgänge - Kurzer Schleudergang Maximale Schleuderdrehzahl 1200 U/min Max.
Praktische Tipps und Hinweise Temperaturen 95° oder 90° für normal verschmutzte weiße Baumwolle und Leinen (z.B. Geschirrtücher, Handtücher, Tischtücher, Betttücher...) 60°/50° für normal verschmutzte, farbechte Kleidungsstücke (z.B. Hemden, Nachthemden, Schlafanzüge....) aus Leinen, Baumwolle oder Synthetikfasern und für leicht verschmutzte weiße Baumwolle (z.B. Unterwäsche) 40° - 30° - Kalt für Feinwäsche (z.B.
Praktische Tipps und Hinweise 21 Die folgenden Gewichtsangaben sind lediglich Richtwerte: Geschirrtuch, Damenslip, Serviette, Bluse, Herrenunterhose 100 g Entfernen von Flecken Hartnäckige Flecken lassen sich möglicherweise nicht allein mit Wasser und Waschmittel entfernen. Sie sollten daher vor dem Waschen vorbehandelt werden. Blut: Behandeln Sie frische Flecken mit kaltem Wasser. Bereits getrocknete Flecken lassen Sie über Nacht in Wasser mit einem Spezialwaschmittel einweichen.
Reinigung und Pflege • Flüssigwaschmittel, vorzugsweise für Programme mit niedrigen Temperaturen (max. 60 °C) für alle Gewebearten oder nur speziell für Wolle. Waschmittel und Pflegemittel müssen vor dem Start des Waschprogramms in die entsprechenden Fächer der Waschmittelschublade eingefüllt werden. Bei der Verwendung von Waschmittelkonzentraten oder Flüssigwaschmitteln muss ein Programm ohne Vorwäsche ausgewählt werden.
Reinigung und Pflege 23 Wir empfehlen daher die regelmäßige Durchführung eines Waschgangs zum Reinigen der Maschine. Hierzu gehen Sie wie folgt vor: • In der Trommel darf sich keine Wäsche befinden. • Wählen Sie das heißeste Baumwollwaschprogramm. • Verwenden Sie eine normale Menge Pulverwaschmittel mit Bleichmittel. Reinigung der Außenseiten Reinigen Sie die Außenseiten des Geräts nur mit Seifenlauge und trocknen Sie sie anschließend gründlich.
Reinigung und Pflege 3. Nach dem Herausziehen der Schublade reinigen Sie mit einer kleinen Bürste die Vertiefung. Stellen Sie sicher, dass alle Waschmittelreste an der Ober- und Unterseite in den Rillen entfernt sind. 4. Setzen Sie die Schublade wieder ein und starten Sie das Spülprogramm ohne Wäsche in der Trommel. Wäschetrommel Rostablagerungen in der Trommel können durch Fremdkörper in der Waschmaschine oder durch eisenhaltiges Wasser entstehen.
Reinigung und Pflege 3. Stellen Sie einen Behälter direkt neben den Pumpendeckel ( A ), um Wasser aufzufangen. 4. Ziehen Sie den Notentleerungsschlauch heraus ( B ), halten Sie das Ende in den Behälter und entfernen Sie die Abdeckung des Schlauchs. 5. Wenn kein Wasser mehr abläuft, schrauben Sie den Deckel der Laugenpumpe entgegen dem Uhrzeigersinn auf und ziehen ihn heraus. Halten Sie stets einen Lappen bereit, um austretendes Wasser beim Abnehmen des Deckels aufzuwischen. 6.
Reinigung und Pflege 7. Verschließen Sie den Notentleerungsschlauch und schieben Sie den Schlauch wieder in die Maschine. 8. Schrauben Sie den Deckel wieder fest ein. WARNUNG! Wenn das Gerät in Betrieb ist, kann sich je nach gewähltem Programm heißes Wasser in der Pumpe befinden. Entfernen Sie den Pumpendeckel niemals während eines Waschgangs. Warten Sie immer, bis die Maschine den Waschgang beendet hat und leer ist.
Was tun, wenn … 27 Frostschutzmaßnahmen Wenn die Waschmaschine in einem Raum aufgestellt ist, in dem die Temperatur unter 0°C abfallen kann, ergreifen Sie folgende Vorsichtsmaßnahmen: 1. Schließen Sie den Wasserhahn und schrauben Sie den Wasserzulaufschlauch vom Hahn ab; 2. Stellen Sie einen flachen Behälter auf den Fußboden und lassen Sie das Wasser über den Notentleerungsschlauch in den Behälter laufen; 3.
Was tun, wenn … Störung Die Waschmaschine startet nicht: Das Gerät füllt kein Wasser auf: Mögliche Ursache / Abhilfe Die Tür ist nicht richtig geschlossen. • Drücken Sie die Tür fest zu. Der Stecker ist nicht richtig in die Steckdose eingesteckt. • Stecken Sie den Stecker in die Steckdose. Die Steckdose wird nicht mit Strom versorgt. • Überprüfen Sie bitte die Elektroinstallation in Ihrem Haus. Die Hauptsicherung ist durchgebrannt. • Tauschen Sie die Sicherung aus.
Was tun, wenn … 29 Störung Mögliche Ursache / Abhilfe Das Gerät pumpt nicht ab und/oder schleudert nicht: Der Ablaufschlauch ist gequetscht oder geknickt. • Überprüfen Sie den Anschluss des Ablaufschlauchs. Der Ablauffilter ist verstopft. • Reinigen Sie den Ablauffilter. Es wurde eine Zusatzfunktion oder ein Programm gewählt, das damit endet, dass noch Wasser in der Trommel steht, oder das auf den Schleudergang verzichtet. • Wählen Sie ein Abpump- oder Schleuderprogramm.
Was tun, wenn … Störung Mögliche Ursache / Abhilfe Die Tür lässt sich nicht öffnen: Das Programm läuft noch. • Warten Sie das Ende des Waschzyklus ab. Die Tür wurde noch nicht entriegelt. • Warten Sie, bis das Symbol 9.5 erloschen ist. Es befindet sich Wasser in der Trommel. • Wählen Sie das Programm Abpumpen oder Schleudern, um das Wasser abzupumpen. Das Gerät vibriert oder läuft sehr laut: Transportsicherungen und Verpackungsteile wurden nicht entfernt.
Technische Daten 31 Wenn Sie das Problem nicht genau bestimmen oder lösen können, wenden Sie sich an unseren Kundendienst. Beim Anruf sollten Sie Angaben zum Modell, die Produktnummer, die Seriennummer und das Kaufdatum Ihrer Maschine zur Hand haben: Der Kundendienst benötigt diese Informationen.
Gerät aufstellen The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. Installationsanleitung Gerät aufstellen Auspacken Bevor das Gerät verwendet werden kann, müssen alle Transportsicherungen und Verpackungsmaterialien entfernt werden. Es empfiehlt sich, alle Transportsicherungen für eventuelle zukünftige Transporte des Gerätes aufzubewahren. 1.
Gerät aufstellen 3. Lösen Sie mit dem mitgelieferten Schraubenschlüssel die mittlere Schraube A auf der Rückseite. A 4. Lösen Sie die beiden hinteren großen Schrauben B und die sechs kleineren Schrauben C . Entfernen Sie die Halterung D. C B D B C 5. Ziehen Sie die sechs kleineren Schrauben C wieder fest. Schieben Sie das entsprechende Distanzstück aus Kunststoff E heraus.
Gerät aufstellen 6. Verschließen Sie das kleinere obere Loch und die beiden größeren Löcher mit den entsprechenden Kunststoffkappen, die sich im Beutel mit der Benutzerinformation befinden. 7. Schließen Sie den Wasserzulaufschlauch wie in Abschnitt "Wasserzulauf" beschrieben an. Die unterschiedlichen Kappen werden mit dem Gerät in einem Plastikbeutel mitgeliefert, in dem sich auch die Benutzerinformation befindet. Aufstellen und Ausrichten Stellen Sie das Gerät auf einem ebenen, harten Boden auf.
Gerät aufstellen 35 Ziehen Sie nach dem Ausrichten des Geräts die Kontermuttern an. Wasserzulauf Ein Zulaufschlauch wird mitgeliefert und befindet sich im Inneren der Trommel. Dieses Gerät muss an eine Kaltwasserleitung angeschlossen werden. Verwenden Sie für den Wasseranschluss nicht den Schlauch Ihres bisherigen Gerätes. 1. Öffnen Sie die Tür und ziehen Sie den Zulaufschlauch heraus. 2. Schließen Sie den Schlauch mit dem Winkelverbindungsstück an die Maschine an.
Gerät aufstellen Wasserstopp-Vorrichtung Der Wasserzulaufschlauch ist mit einer Wasserstopp-Vorrichtung als Schutz gegen Wasserschäden ausgestattet, die durch das natürliche Altern des Schlauchs auftreten können. Dieser Fehler wird durch ein rotes Feld im Sichtfenster "A" angezeigt. Sollte sich diese Störung einstellen, drehen Sie den Wasserhahn zu und lassen Sie vom Kundendienst den Schlauch ersetzen. Wasserablauf Das Ende des Ablaufschlauchs kann auf drei Weisen angeschlossen werden: 1.
Elektrischer Anschluss 37 Der Ablaufschlauch darf auf max. 4 Meter verlängert werden. Einen Verlängerungsschlauch und ein Verbindungsstück erhalten Sie bei unserem Kundendienst. Elektrischer Anschluss Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür. Vergewissern Sie sich, dass die Stromversorgung in Ihrem Haus für die erforderliche Maximallast geeignet ist. Berücksichtigen Sie dabei auch die anderen Elektrogeräte, die Sie verwenden.
Einbau Einbau Dieses Gerät lässt sich in eine Einbauküche integrieren. Die entsprechende Nische muss die in Abbildung A angegebenen Abmessungen aufweisen. Vorbereitung und Montage der Tür 600 600 515 596 195 818 600 min 820 min 120 416 541 8 195 160 195 Das Gerät ist werkseitig für die Türöffnung von rechts nach links vorgerüstet. In diesem Fall müssen Sie nur die mit dem Gerät gelieferten Scharniere (1) und den Gegenmagneten (6) in der richtigen Höhe anbringen (Abb. B ).
Einbau • Scharniere Zum Montieren der Scharniere müssen Sie zwei Löcher (Durchmesser 35 mm, Tiefe 12,5-14 mm je nach Tiefe des Türmöbels) in die Türinnenseite bohren. Der Abstand zwischen den Mittelpunkten der Bohrungen muss 416 mm betragen. Der Abstand (B) von der Oberkante der Tür zum Mittelpunkt der Bohrung hängt von den Abmessungen der benachbarten Möbel ab. Die erforderlichen Abmessungen sind aus der Abbildung C ersichtlich. Die Scharniere werden an der Tür mit Holzschrauben befestigt (2-Abb.
Umweltschutz Umweltschutz Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet.
132956770-00-102009 www.electrolux.