L 76264 ETL WASCHMASCHINE BENUTZERINFORMATION
INHALT 4 6 6 7 10 13 14 14 15 15 16 17 19 23 25 26 SICHERHEITSHINWEISE GERÄTEBESCHREIBUNG ZUBEHÖR BEDIENFELD WASCHPROGRAMME VOR DER ERSTEN INBETRIEBNAHME GEBRAUCH DES GERÄTS EINFÜLLEN DER WÄSCHE VERWENDUNG VON WASCH- UND PFLEGEMITTELN EINSTELLEN UND STARTEN EINES PROGRAMMS AM PROGRAMMENDE PRAKTISCHE TIPPS UND HINWEISE REINIGUNG UND PFLEGE FEHLERSUCHE TECHNISCHE DATEN MONTAGE UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern.
DEUTSCH 3 FÜR PERFEKTE ERGEBNISSE Danke, dass Sie sich für dieses AEG Produkt entschieden haben. Wir haben es geschaffen, damit Sie viele Jahre von seiner ausgezeichneten Leistung und den innovativen Technologien, die Ihnen das Leben erleichtern, profitieren können. Es ist mit Funktionen ausgestattet, die in gewöhnlichen Geräten nicht vorhanden sind. Nehmen Sie sich ein paar Minuten Zeit zum Lesen, um seine Vorzüge kennen zu lernen.
SICHERHEITSHINWEISE Lesen Sie vor der Montage und Anwendung sorgfältig dieses Handbuch: • Für Ihre Sicherheit und die Sicherheit Ihres Eigentums. • Zum Schutz der Umwelt. • Zur korrekten Bedienung des Geräts. Bewahren Sie diese Bedienungsanleitung in der Nähe des Geräts auf, auch wenn Sie dieses an einem anderen Ort aufstellen oder es an eine andere Person weitergeben. Der Hersteller ist nicht dafür verantwortlich, wenn eine inkorrekte Montage oder Verwendung Schäden verursacht.
DEUTSCH an einer Netzsteckdose angeschlossen ist. • Die elektrische Installation, die Klempnerarbeiten und die Montage des Geräts dürfen nur von einer qualifizierten Fachkraft ausgeführt werden. Auf diese Weise werden Gebäudeschäden und Verletzungen vermieden. • Stellen Sie das Gerät nicht an einem Ort auf, an dem die Temperatur unter 0 °C absinken kann, und benutzen Sie das Gerät nicht, wenn die Temperatur unter 0 °C absinken könnte.
GERÄTEBESCHREIBUNG 1 7 2 8 9 3 10 11 4 5 6 12 1 Bedienfeld 2 Deckel 8 Netzkabel 9 Wassereinlassventil 3 Deckeltaste 4 Filterabdeckung 10 Wasserablaufschlauch 11 Transportschrauben 5 Hebel zum Bewegen des Geräts 6 Schraubfüße 12 Schraubfüße zum Ausrichten des Geräts 7 Typenschild ZUBEHÖR 1 2 3 1 Kunststoffkappe Zum Verschließen der Öffnung auf der Rückseite des Geräts nach dem Entfernen der Transportschraube.
DEUTSCH 7 BEDIENFELD 1 2 3 10 9 8 7 6 5 4 1 Ein-/Aus-Taste 2 Programmwahlschalter 6 Zeitspar-Taste 7 Extra Spülen-Taste 3 Display 4 Start/Pause-Taste 8 Flecken-Taste 9 Schleuderdrehzahl-Taste 5 Zeitvorwahl-Taste 10 Temperatur-Taste EIN-/AUS-TASTE 1 Drücken Sie diese Taste, um das Gerät ein- oder auszuschalten. Wird das Gerät eingeschaltet, ist eine Tonfolge zu hören.
Im Display erscheint: A • Die maximale Temperatur des Programms B • Die Standard-Schleuderdrehzahl des Programms • Die Symbole „Kein Schleudergang“1) und „Spülstopp“ C • Die Display-Symbole2) Symbol Beschreibung Hauptwaschgang Spülgänge Schleudergang Kindersicherung Sie können die Tür des Geräts nicht öffnen, solange dieses Symbol erscheint. Sie können die Tür erst öffnen, wenn das Symbol erlischt.
DEUTSCH START-/PAUSE-TASTE 4 Drücken Sie die Taste 4 , um ein Programm zu starten oder zu unterbrechen. ZEITVORWAHL-TASTE 5 Drücken Sie die Taste 5 , um den Start eines Programms um 30 Minuten bis 20 Stunden zu verzögern. ZEITSPAR-TASTE 6 Drücken Sie die Taste 6 , um die Programmdauer zu verkürzen. • Drücken Sie die Taste einmal, um die Programmdauer für normal verschmutzte Wäsche zu verkürzen. • Drücken Sie zweimal, um die Programmdauer „Extra Kurz“ für nur gering verschmutzte Wäsche einzustellen.
FUNKTION KINDERSICHERUNG FUNKTION „IMMER EXTRA SPÜLEN“ Diese Funktion verhindert, dass Kinder mit dem Bedienfeld spielen. • Drücken Sie zum Aktivieren der Funktion die Tasten 9 und 10 gleichzeitig so lange, bis im Display das Symerscheint. bol • Drücken Sie zum Deaktivieren der Funktion die Tasten 9 und 10 gleichzeitig so lange, bis das Symbol im Display erlischt. Wenn Sie die Funktion aktiveren • Bevor Sie die Start/Pause-Taste 4 drücken, kann das Gerät nicht starten.
DEUTSCH 11 Programm Temperatur Wäschetyp Max. Beladung Programmbeschreibung Funktionen Pflegeleicht + Vorwäsche 60 °C - Kalt Synthetik- oder Mischgewebe, stark verschmutzt. Max. 2,5 kg Vorwaschgang Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN ZEIT SPAREN2) Leichtbügeln3) 60 °C - Kalt Synthetikfasern, normal verschmutzt. Max.
Programm Temperatur Wäschetyp Max. Beladung Programmbeschreibung Funktionen Jeans 60 °C - Kalt Textilien aus Jeansstoff. Trikots aus modernen Geweben. Max. 3 kg Waschgang Spülgänge Kurzer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN ZEIT SPAREN2) Schnell Intensiv 60°-40° Schnellwaschprogramm für leicht verschmutzte weiße/farbechte Buntwäsche und Mischgewebe. Max. 2,5 kg Waschgang Spülgänge Langer Schleudergang DREHZAHLREDUZIERUNG SPÜLSTOPP EXTRA SPÜLEN 20 Min.
DEUTSCH 13 VERBRAUCHSWERTE Energieverbrauch (KWh)2) Wasserverbrauch (Liter)2) Koch-/Buntwäsche 90 °C 2.00 58 Koch-/Buntwäsche + Vorwäsche 90 °C 2.20 65 Extra Silent 90 °C 2.00 90 Pflegeleicht 60 °C 0.85 44 Synthetik + Vorwäsche 60 °C 1.10 50 Leichtbügeln 60 °C 0.50 55 Feinwäsche 40 °C 0.50 48 Wolle/Seide 40 °C 0.50 50 Schleudern/Abpumpen 0.05 / Spülgang 0.10 35 Gardinen 40 °C 0.60 60 Jeans 60 °C 0.90 55 Schnell Intensiv 60 °C 0.95 45 20 Min. 3 kg 30 °C 0.
GEBRAUCH DES GERÄTS 1. Drehen Sie den Wasserhahn auf. 2. Stecken Sie den Netzstecker in die Steckdose. 3. Drücken Sie die Taste 1 , um das Gerät einzuschalten. 4. Legen Sie die Wäsche in das Gerät. 5. Verwenden Sie die richtige Waschmittel- und Pflegemittelmenge. 6. Stellen Sie je nach Wäscheart und Verschmutzungsgrad das passende Waschprogramm ein. EINFÜLLEN DER WÄSCHE 3. Legen Sie die Wäsche in die Trommel. Achten Sie darauf, nicht zu viel Wäsche einzufüllen. 4.
DEUTSCH 15 VERWENDUNG VON WASCH- UND PFLEGEMITTELN Waschmittelfach für die Vorwaschphase und das Einweichprogramm. Waschmittelfach für die Waschphase. Fach für flüssige Pflegemittel (Weichspüler, Stärke). Die Markierung M ist die Obergrenze für flüssige Pflegemittel. Halten Sie sich immer an die Anweisungen auf der Verpackung der Waschmittelprodukte. EINSTELLEN UND STARTEN EINES PROGRAMMS 1. Drehen Sie den Programmwahlschalter. Die entsprechende Programmanzeige leuchtet auf. 2.
2. Ändern Sie die eingestellte Funktion. EINSTELLEN DER ZEITVORWAHL 1. Drücken Sie die Taste 5 wiederholt, bis das Display die Zeit in Minuten und Stunden anzeigt. Die entsprechenden Symbole leuchten auf. 2. Nach dem Drücken der Taste 4 beginnt das Gerät die vorgewählte Zeit herunterzuzählen. Nach Ablauf der Zeitvorwahl startet das Programm automatisch. Sie können die Einstellung der Zeitvorwahl vor dem Einschalten des Geräts mit der Taste 4 jederzeit abbrechen oder ändern.
DEUTSCH Wenn Sie das Gerät wieder einschalten, zeigt das Display das Ende des zuletzt gewählten Programms an. Drehen Sie den Programmwahlschalter, um ein neues Programm einzustellen. • Nehmen Sie die Wäsche aus dem Gerät. Vergewissern Sie sich, dass die Trommel leer ist. • Lassen Sie die Tür offen, damit sich kein Schimmel und keine unangenehmen Gerüche bilden. • Schließen Sie den Wasserhahn.
• Mischen Sie nicht verschiedene Waschmittel. • Verwenden Sie der Umwelt zuliebe nicht mehr als die angegebene Waschmittelmenge. • Halten Sie sich an die Anweisungen auf der Verpackung dieser Produkte. • Verwenden Sie die korrekten Produkte für Art und Farbe des Gewebes, Programmtemperatur und Verschmutzungsgrad. • Stellen Sie keine Vorwäsche ein, wenn Sie Flüssigwaschmittel verwenden.
DEUTSCH 19 REINIGUNG UND PFLEGE WARNUNG! VORSICHT! Verwenden Sie keinen Alkohol, keine Lösungsmittel und keine Chemikalien. Trennen Sie das Gerät von der Stromversorgung, bevor Sie es reinigen. ENTKALKEN Normales Leitungswasser enthält Kalk. Falls erforderlich, benutzen Sie einen Enthärter, um Kalkablagerungen zu entfernen. Verwenden Sie ein Produkt, das speziell für Waschmaschinen hergestellt wird. Halten Sie sich an die Herstelleranweisungen auf der Verpackung.
WARNUNG! • Ziehen Sie den Netzstecker aus der Netzsteckdose. • Entfernen Sie den Filter nicht, während das Gerät in Betrieb ist. Reinigen Sie den Ablauffilter nicht, wenn das Wasser im Gerät heiß ist. Das Wasser muss abgekühlt sein, bevor Sie den Filter reinigen. So reinigen Sie den Filter: 1. Öffnen Sie die Filterabdeckung. 2. 3. 4. 5. 6. 7. 8. ZULAUFSCHLAUCHFILTER UND VENTILFILTER WARNUNG! • Ziehen Sie den Netzstecker aus der Netzsteckdose.
DEUTSCH 21 So reinigen Sie die Wasserzulauffilter: 1. Schließen Sie den Wasserhahn. 2. Entfernen Sie den Wasserzulaufschlauch vom Wasserhahn. 3. Reinigen Sie den Filter im Zulaufschlauch mit einer harten Bürste. 4. 5. 6. 7. Entfernen Sie den Zulaufschlauch von der Geräterückseite. Reinigen Sie den Filter im Ventil mit einer harten Bürste oder einem Handtuch. Bringen Sie den Zulaufschlauch wieder an. Vergewissern Sie sich, dass alle Anschlüsse vollkommen dicht sind, damit kein Wasser austreten kann.
3. Wählen Sie das Abpumpprogramm und lassen Sie es komplett durchlaufen. 4. Drehen Sie den Programmwahlschalter auf Stopp, um das Gerät von der Stromversorgung zu trennen. 5. Schalten Sie das Gerät aus. WARNUNG! Vergewissern Sie sich vor einer erneuten Benutzung des Geräts, dass die Temperatur mehr als 0 °C beträgt. Der Hersteller ist nicht verantwortlich für Schäden, die durch niedrige Temperaturen entstanden sind.
DEUTSCH 23 FEHLERSUCHE Das Gerät startet nicht oder stoppt während des Betriebs. Versuchen Sie zunächst eine Lösung für das Problem zu finden (siehe Tabelle). Wenn Sie keine Lösung finden, wenden Sie sich an den Kundendienst. Bei einigen Problemen ertönt ein Signalton und das Display zeigt einen Alarmcode an: • - Es läuft kein Wasser in das Gerät. • - Das Gerät pumpt das Wasser nicht ab. • - Die Gerätetür steht offen oder ist nicht richtig geschlossen. • - Die Aquasafe-Einrichtung ist ausgelöst.
Problem Mögliche Ursache Mögliche Abhilfe Die Gerätetür steht offen oder ist nicht richtig geschlossen. Schließen Sie die Tür richtig. Die Aquasafe-Einrichtung ist aktiv. • Schalten Sie das Gerät aus. • Schließen Sie den Wasserhahn. • Wenden Sie sich an den Kundendienst. Das Gerät schleudert nicht. Die Schleuderphase ist ausgeschaltet. Stellen Sie das Schleuderprogramm ein. Der Filter der Ablaufpumpe ist zugesetzt. Reinigen Sie den Filter der Ablaufpumpe. Siehe unter „Reinigung und Pflege“.
DEUTSCH 25 Problem Mögliche Ursache Mögliche Abhilfe Das Gerät verursacht ein ungewöhnliches Geräusch. Das Gerät ist nicht ausgerichtet. Richten Sie das Gerät waagrecht aus. Siehe hierzu „Montage“. Sie haben die Verpackungsmaterialien und/ oder die Transportschrauben nicht entfernt. Entfernen Sie die Verpackungsmaterialien und/oder die Transportschrauben. Siehe hierzu „Montage“. Es ist sehr wenig Wäsche Füllen Sie mehr Wäsche ein. in der Trommel.
MONTAGE AUSPACKEN 1. Entfernen Sie die äußere Folie. Benutzen Sie, falls erforderlich, ein Teppichmesser. 1 2 2. Entfernen Sie die Styropor-Verpackungsteile. 3. 4. Kippen Sie das Gerät nach hinten. Drehen Sie das Gerät auf einer Ecke, um den Transportschutz unter dem Gerät zu entfernen. 5. 6. Öffnen Sie den Deckel. Entfernen Sie das rote Teil und die Kunststofffolie.
DEUTSCH 27 7. Nehmen Sie die Waschmittelschublade heraus. 8. Entfernen Sie das Styropor-Stück. 9. Setzen Sie die Waschmittelschublade wieder ein. 10. Öffnen Sie die Trommel und entnehmen Sie alles, was sich darin befindet. 1 2 11. Entnehmen Sie das Netzkabel und den Ablaufschlauch aus den Schlauchhalterungen. 12. Lösen Sie die drei Schrauben. 2 1 1 2 1 13. Entfernen Sie das Kunststoffteil. 14. Ersetzen Sie den Kunststoff-Abstandshalter durch die Kunststoffkappe.
15. Kürzen Sie diese Kunststoffteile so, um das Gerät auf gleicher Höhe zu den benachbarten Möbelstücken einzubauen. WARNUNG! Entfernen Sie vor der Montage des Geräts alle Verpackungsmaterialien und Transportschrauben. Wir empfehlen, Verpackungsmaterial und Transportschrauben für einen späteren Transport aufzubewahren. AUFSTELLEN UND AUSRICHTEN 1. Ziehen Sie den Hebel von rechts nach links. 2. Wenn die Position des Geräts stimmt, drücken Sie den Hebel wieder zurück. 3. 4. A 5. 6. 7.
DEUTSCH 29 • Das Gerät muss einen waagerechten und festen Stand haben. VORSICHT! Schieben Sie weder Karton noch Holz oder ähnliche Materialien unter die Stellfüße, um das Gerät auszurichten. WASSERZULAUFSCHLAUCH 1. Schließen Sie den Schlauch am Gerät an. Lösen Sie die Ringmutter, um ihn in die gewünschte Position zu bewegen. 90˚ 2. Schließen Sie den Wasserzulaufschlauch an einen Kaltwasserhahn mit einem 3/4"-Außengewinde an. VORSICHT! Achten Sie darauf, dass die Anschlüsse dicht sind.
Verwenden Sie keinen Verlängerungsschlauch, falls der Zulaufschlauch zu kurz ist. Wenden Sie sich an den Kundendienst, um einen anderen Zulaufschlauch zu erhalten. Aquastopp-Einrichtung A Der Zulaufschlauch verfügt über eine Wasserstopp-Vorrichtung. Damit werden Wasserlecks am Schlauch, die durch natürliche Alterung auftreten könnten, verhindert. Der rote Bereich im Fenster „A“ zeigt diesen Fehler an.
DEUTSCH 31 • An ein Standrohr mit Entlüftungsöffnung. Orientieren Sie sich an der Abbildung. Direkte Einleitung in ein Ablaufrohr auf einer Höhe nicht unter 70 cm und nicht über 100 cm. Das Ende des Ablaufschlauchs muss immer belüftet sein, d.h. der Innendurchmesser des Ablaufrohres muss größer sein als der Außendurchmesser des Ablaufschlauchs. Ohne Kunststoff-Schlauchführung. • An einen Siphon. Orientieren Sie sich an der Abbildung.
www.aeg.