LAVAMAT 76950A Benutzerinformation Waschmaschine
Inhalt Danke, dass Sie sich für eines unserer hochqualitativen Produkte entschieden haben. Lesen Sie für eine optimale und gleichmäßige Leistung Ihres Gerätes diese Benutzerinformation bitte sorgfältig durch. Sie wird Ihnen helfen, alle Vorgänge perfekt und äußerst effizient zu steuern. Damit Sie diese Benutzerinformation bei Bedarf stets zur Hand haben, empfehlen wir Ihnen, sie an einem sicheren Ort aufzubewahren.
Sicherheitshinweise Aufstellanweisung 32 Gerät aufstellen Auspacken Aufstellen und Ausrichten Wasserzulauf Wasserstopp-Vorrichtung 32 32 34 35 36 Wasserablauf Elektrischer Anschluss Umwelttipps Verpackungsmaterial Umwelttipps 3 36 37 38 38 38 Änderungen vorbehalten Gebrauchsanweisung Sicherheitshinweise Bitte sorgfältig lesen und für zukünftige Verwendung aufbewahren. • Die Sicherheit Ihres Gerätes entspricht den Industriestandards und den gesetzlichen Vorschriften zur Gerätesicherheit.
Sicherheitshinweise • Benutzen Sie Ihre Waschmaschine nicht zum Waschen von Materialien ohne Saum oder zerrissenen Stoffen. • Nach dem Waschen und zum Reinigen und Warten der Maschine sollten Sie immer den Netzstecker ziehen und den Wasserhahn zudrehen. • Versuchen Sie unter keinen Umständen, das Gerät selbst zu reparieren. Reparaturen durch unerfahrene Personen können zu Verletzungen und schweren Funktionsstörungen führen. Wenden Sie sich an Ihren Kundendienst.
Gerätebeschreibung 5 • Benutzen Sie die Waschmaschine niemals, wenn das Netzkabel beschädigt ist, oder die Bedienblende, die Arbeitsplatte oder der Sockel so beschädigt sind, dass das Innere der Waschmaschine frei liegt.
Bedienblende 1 2 3 4 5 6 Waschmittelschublade Bedienblende Türgriff Typenschild Laugenpumpe Einstellbare Füße Waschmittelschublade Waschmittelfach für Vorwäsche . Das Vorwaschmittel wird zu Beginn des Waschprogramms eingespült. Fach für Waschpulver oder Flüssigwaschmittel für den Hauptwaschgang . Fach für flüssige Pflegemittel (Weichspüler, Stärke). Fach für Fleckentferner für den Hauptwaschgang mit FLECKEN-Option . Bedienblende Nachstehend ist eine Bedienblende abgebildet.
9 1 2 3 4 5 6 7 8 1 Programm-Wahlschalter 2 TEMPERATUR-Taste 3 Schleuderdrehzahl-Taste 4 OPTION Taste 5 OK-Taste 6 ZEITSPAREN Taste 7 START/PAUSE Taste 8 ZEITVORWAHL Taste 9 Display-Anzeige Symbole : Handwäsche, Kindersicherung Display-Anzeige 9.1 9.2 9.3 9.4 9.9 9.5 9.6 9.7 9.8 9.1 - Temperaturanzeige und KALT -Symbol 9.2 - Schleuderdrehzahl-Anzeige, SPÜLSTOPP , NACHTPROGRAMM -Symbole , HAUPTWÄSCHE , SPÜLEN , 9.
• Während des Programmablaufs blinkt eine schwarze Linie unter dem Symbol für die aktuelle Programmphase. Am Ende jeder Waschphase leuchtet die Linie unter dem entsprechenden Symbol kontinuierlich. Wenn die Kontrolllampe für das Symbol ÜBERDOSIERUNG am Programmende aufleuchtet, zeigt dies an, dass zu viel Waschmittel verwendet wurde. 9.4 - Optionen: VORWÄSCHE , FLECKEN , SENSITIV , EXTRASPÜLEN 9.
Erste Inbetriebnahme 9 Erste Inbetriebnahme • Achten Sie darauf, dass der elektrische Anschluss und der Wasseranschluss der Installationsanweisung entsprechen. • Entfernen Sie den Polystyrolblock und alles andere Material aus der Trommel. • Starten Sie vor dem ersten Waschgang ein Programm für Koch-/Buntwäsche mit der höchsten Temperatur ohne Wäsche, um alle fertigungsbedingten Rückstände aus der Trommel und der Wanne zu entfernen.
Täglicher Gebrauch Täglicher Gebrauch Wäsche einfüllen 1. Öffnen Sie die Tür, indem Sie den Türgriff behutsam nach außen ziehen. Legen Sie die Wäsche Stück für Stück lose in die Trommel. 2. Drücken Sie die Tür fest zu. Das Schloss muss hörbar einrasten. Wichtig! Achten Sie darauf, dass die Wäsche nicht zwischen der Tür und der Gummidichtung eingeklemmt wird. Messen Sie Waschmittel und Weichspüler ab Ihr neues Gerät wurde speziell für die Einsparung von Wasser, Energie und Waschmittel konstruiert. 1.
Täglicher Gebrauch 11 2. Falls erforderlich, füllen Sie Weichspüler in das Fach mit der Markierung (die verwendete Menge darf die Markierung MAX in der Schublade nicht übersteigen). Schließen Sie die Waschmittelschublade vorsichtig. Wählen Sie das gewünschte Programm mit dem Programm-Wahlschalter (1) Sie können das richtige Programm für jede Art von Wäsche anhand der Beschreibungen in den Waschprogrammtabellen auswählen (siehe "Waschprogramme").
Täglicher Gebrauch Wählen Sie die Optionen SCHLEUDERDREHZAHL, NACHTPROGRAMM oder SPÜLSTOPP durch (Taste 3) Wurde das gewünschte Programm gewählt, dann schlägt Ihr Gerät automatisch die maximale Schleuderdrehzahl für dieses Programm vor. Drücken Sie wiederholt diese Taste, um die Schleuderdrehzahl zu ändern, wenn Sie mit einer anderen Schleuderdrehzahl als der vorgeschlagenen schleudern möchten.
Täglicher Gebrauch 13 VORWÄSCHE-Option Wählen Sie diese Option, wenn Sie Ihre Wäsche bei 30°C vor dem Hauptwaschgang vorwaschen möchten. Die Vorwäsche endet bei Programmeinstellung Koch-/Buntwäsche und Pflegeleicht mit einem kurzen Schleudergang, bei Feinwäsche nur mit Abpumpen des Wassers. Das entsprechende Symbol erscheint auf dem Display. Diese Option wird für stark verschmutzte Wäsche empfohlen.
Täglicher Gebrauch Das TÜR-Symbol wird angezeigt, um darauf hinzuweisen, dass die Maschine in Betrieb und die Tür verriegelt ist. Drücken Sie zur Unterbrechung eines laufenden Programms die Taste 7 : die entsprechende rote Kontrolllampe beginnt zu blinken. Um das Programm an der Stelle fortzusetzen, an der es unterbrochen wurde, drücken Sie die Taste 7 erneut. Wenn Sie eine Startzeitvorwahl ausgewählt haben, beginnt das Gerät jetzt mit dem Herunterzählen.
Täglicher Gebrauch 15 Programm-Unterbrechung Drücken Sie die Taste 7 , um ein laufendes Programm zu unterbrechen. Die entsprechende Kontrolllampe blinkt. Um das Programm fortzusetzen, drücken Sie die Taste erneut. Programm löschen Drehen Sie den Programm-Wahlschalter auf , um ein laufendes Programm abzubrechen. Anschließend können Sie ein neues Programm wählen. Öffnen der Tür nach dem Programmstart Drücken Sie zunächst die Taste 7 , um das laufende Programm zu unterbrechen.
Waschprogramme Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen KOCH-BUNTWÄSCHE 95°- Kalt Hauptwäsche - Spülgänge Max. Schleuderdrehzahl 1600 U/min Max. Beladung 8 kg - Reduzierte Beladung 4 kg Für weiße und bunte Baumwolle (normal verschmutzte Teile). U/MIN / NACHTPROGRAMM / SPÜLSTOPP, VORWÄSCHE 1), FLECKEN2), SENSITIV, EXTRASPÜLEN, ZEITSPAREN 3) HYGIENE 60° Hauptwäsche - Spülgänge Max. Schleuderdrehzahl 1600 U/min Max.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen PFLEGELEICHT 60°- Kalt Hauptwäsche - Spülgänge Maximale Schleuderdrehzahl 1200 U/min Max. Beladung 4 kg - Reduzierte Beladung 2 kg Synthetik- oder Mischgewebe: Unterwäsche, farbige Textilien, bügelfreie Hemden, Blusen.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen PUMPEN Abpumpen des Wassers Zum Abpumpen des letzten Spülwassers bei Programmen mit den Optionen Spülstopp oder Nachtprogramm. SCHLEUDERN Abpumpen und Schleudern Max. Schleuderdrehzahl 1600 U/min Max. Beladung 8 kg Separater Schleudergang für handgewaschene Kleidungsstücke und nach Programmen mit der ausgewählten Option Spülstopp oder Nachtprogramm.
Waschprogramme Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen U/MIN / NACHTPRODESSOUS GRAMM / SPÜLSTOPP 40°- Kalt Hauptwäsche - Spülgänge Maximale Schleuderdrehzahl 1200 U/min Max. Beladung 1 kg Dieses Programm eignet sich zum Waschen sehr empfindlicher Wäschestücke, wie z.B. Unterwäsche, Spitzen-BHs usw. OUTDOOR 40°- Kalt Hauptwäsche - Spülgänge Maximale Schleuderdrehzahl 800 U/min Max. Beladung 2 kg Sonderprogramm für Sportbekleidung.
Praktische Tipps und Hinweise Programm Maximale Temperatur und Mindesttemperatur Programmbeschreibung Max. Wäschemenge Wäscheart Optionen SUPER ECO Kalt Hauptwäsche - Spülgänge Maximale Schleuderdrehzahl 1200 U/min Max. Beladung 3 kg Mischfasern (Baumwolle und Synthetik). Kaltwaschprogramm zum Sparen von Energie, Wasser und Zeit. Dieses Programm eignet sich Waschmittel, die bei niedrigen Temperaturen effektiv sind.
Praktische Tipps und Hinweise 21 Vor dem Einfüllen der Wäsche Waschen Sie niemals weiße Wäsche und Buntwäsche zusammen. Die weiße Wäsche könnte sich verfärben oder vergrauen. Neue gefärbte Wäschestücke können beim ersten Waschen färben; daher sollten sie das erste Mal getrennt gewaschen werden. Knöpfen Sie Kopfkissen zu und schließen Sie Reißverschlüsse, Haken und Druckknöpfe. Binden Sie Gürtel und lange Bänder zusammen. Entfernen Sie hartnäckige Flecken vor dem Waschen.
Reinigung und Pflege Wasch- und Zusatzmittel Gute Waschergebnisse sind auch von der Wahl des Waschmittels und der richtigen Füllmenge abhängig. Dies trägt auch zur Vermeidung von Abfall und zum Umweltschutz bei. Obwohl Waschmittel biologisch abbaubar sind, enthalten sie Substanzen, die in größeren Mengen das empfindliche Gleichgewicht der Natur stören können. Die Wahl des Waschmittels hängt von der Gewebeart (Feinwäsche, Wolle, Baumwolle, usw.
Reinigung und Pflege 23 Waschgang ohne Wäsche wirken und befolgen Sie die Anweisungen des Herstellers des Wasserenthärters. Dies hilft, Kalkablagerungen zu verhindern. Nach jedem Waschgang Lassen Sie die Tür eine Weile offen stehen. Dies trägt dazu bei, Schimmelbildung und muffigen Geruch im Geräteinneren zu vermeiden. Lässt man die Tür nach dem Waschen offen, schont dies die Gummidichtung.
Reinigung und Pflege Wäschetrommel Rostablagerungen in der Trommel können durch Fremdkörper in der Waschmaschine oder durch eisenhaltiges Wasser entstehen. Benutzen Sie keine Reinigungsmittel auf Säurebasis, keine chlorierten Scheuermittel und keine Metallschwämmchen oder Stahlwolle zum Reinigen der Trommel. 1. Rostrückstände auf der Innenfläche der Trommel mit einem Edelstahl-Reinigungsmittel entfernen. 2.
Reinigung und Pflege 5. Ziehen Sie den Notentleerungsschlauch heraus, halten Sie das Ende in den Behälter und entfernen Sie die Abdeckung. 6. Wenn kein Wasser mehr abläuft, schrauben Sie den Deckel der Laugenpumpe entgegen dem Uhrzeigersinn auf und ziehen ihn heraus. Halten Sie stets einen Lappen bereit, um austretendes Wasser beim Abnehmen des Deckels aufzuwischen. 7. Drehen Sie den Pumpenflügel und entfernen Sie dabei vorhandene Fremdkörper. 8.
Reinigung und Pflege Wenn das Gerät in Betrieb ist, kann sich je nach gewähltem Programm heißes Wasser in der Pumpe befinden. Entfernen Sie den Pumpendeckel niemals während eines Waschgangs. Warten Sie immer, bis die Maschine den Waschgang beendet hat und leer ist. Achten Sie beim Aufsetzen des Pumpendeckels auf einen festen Sitz, um zu verhindern, dass Wasser austritt oder dass Kinder den Deckel entfernen können.
Was tun, wenn … 27 7. Verschließen Sie den Notentleerungsschlauch und schieben Sie ihn in die Maschine zurück; 8. Schließen Sie die Pumpenklappe und schließen Sie die Tür. Was tun, wenn … Einige Probleme lassen sich auf Wartungsfehler oder Versehen zurückführen und können leicht gelöst werden, ohne den Kundendienst zu rufen. Bevor Sie den Kundendienst rufen, sollten Sie die nachstehenden Punkte überprüfen.
Was tun, wenn … Störung Das Gerät füllt kein Wasser auf: Mögliche Ursache / Abhilfe Der Wasserhahn ist zugedreht. • Drehen Sie den Wasserhahn auf. Der Zulaufschlauch ist eingeklemmt oder geknickt. • Überprüfen Sie den Anschluss des Zulaufschlauchs. Der Filter im Zulaufschlauch ist verstopft. • Reinigen Sie den Filter im Wasserzulaufschlauch. Die Tür ist nicht richtig geschlossen. • Drücken Sie die Tür fest zu. Das Ende des Ablaufschlauchs liegt zu tief.
Was tun, wenn … Störung 29 Mögliche Ursache / Abhilfe Es befindet sich Wasser auf dem Boden: Sie haben zu viel Waschmittel oder ein ungeeignetes Waschmittel verwendet (zu starke Schaumbildung). • Reduzieren Sie die Waschmittelmenge oder benutzen Sie ein anderes Waschmittel. Überprüfen Sie den Anschluss des Zulaufschlauchs auf Dichtheit. Undichtigkeiten sind nicht immer leicht zu erkennen, da das Wasser den Schlauch hinabläuft; überprüfen Sie, ob der Schlauch feucht ist.
Was tun, wenn … Störung Mögliche Ursache / Abhilfe Das Gerät vibriert oder läuft sehr laut: Transportsicherungen und Verpackungsteile wurden nicht entfernt. • Überprüfen Sie, ob das Gerät richtig aufgestellt ist. Das Gerät wurde nicht ausgerichtet • Überprüfen Sie, ob das Gerät waagerecht steht. Die Wäsche ist nicht gleichmäßig in der Trommel verteilt. • Verteilen Sie die Wäsche neu. Möglicherweise befindet sich nur sehr wenig Wäsche in der Trommel. • Füllen Sie mehr Wäsche ein.
Technische Daten 31 Wenn Sie das Problem nicht genau bestimmen oder lösen können, wenden Sie sich an unseren Kundendienst. Beim Anruf sollten Sie Angaben zum Modell, die Produktnummer, die Seriennummer und das Kaufdatum Ihrer Maschine zur Hand haben: Der Kundendienst benötigt diese Informationen.
Gerät aufstellen Programm Wolle / Handwäsche 30° Energieverbrauch (KWh) Wasserverbrauch (in Liter) 0,32 64 Programmdauer (in Minuten) 1) " Koch-/Buntwäsche Energiesparen" bei 60°C mit einer Beladung von 8 kg ist in Übereinstimmung mit EEC 92/75 das Referenzprogramm für die im Energielabel eingetragenen Werte.
Gerät aufstellen 2. Entnehmen Sie das Stromkabel und den Ablaufschlauch aus den Schlauchhalterungen auf der Geräterückseite. 3. Lösen Sie die drei Schrauben. 4. Schieben Sie die entsprechenden Kunststoff-Distanzstücke heraus.
Gerät aufstellen 5. Öffnen Sie die Tür und entnehmen Sie den Zulaufschlauch aus der Trommel sowie den Polystyrolblock, der mit Klebeband an der Türdichtung befestigt ist. 6. Verschließen Sie das kleinere obere Loch und die beiden größeren Löcher mit den entsprechenden Kunststoffkappen, die sich im Beutel mit der Benutzerinformation befinden. 7. Schließen Sie den Wasserzulaufschlauch wie in Abschnitt "Wasserzulauf" beschrieben an.
Gerät aufstellen 35 Die Maschine darf nicht in Räumen aufgestellt werden, in denen die Temperatur unter 0°C fallen kann. Wasserzulauf- und Ablaufschlauch dürfen nicht geknickt oder eingeklemmt werden. Achten Sie beim Installieren des Geräts darauf, dass es im Fall einer Störung für den Techniker gut zugänglich ist. Richten Sie das Gerät genau waagerecht aus, indem Sie die Schraubfüße weiter heraus oder hinein schrauben.
Gerät aufstellen Wasserstopp-Vorrichtung Der Wasserzulaufschlauch ist mit einer Wasserstopp-Vorrichtung als Schutz gegen Wasserschäden ausgestattet, die durch das natürliche Altern des Schlauchs auftreten können. Dieser Fehler wird durch ein rotes Feld im Sichtfenster "A" angezeigt. Sollte sich diese Störung einstellen, drehen Sie den Wasserhahn zu und lassen Sie vom Kundendienst den Schlauch ersetzen. Wasserablauf MAX 100cm • Die Höhe des Ablaufschlauchs darf 100 cm nicht überschreiten.
Elektrischer Anschluss 37 Sie können den Ablaufschlauch an einem Siphon anschließen. Der Ablaufschlauch muss sich über dem Siphon befinden. Befestigen Sie den Ablaufschlauch mit einer Klemme am Siphon. Elektrischer Anschluss Die Daten der elektrischen Anschlusswerte finden sich auf dem Typenschild innen an der Gerätetür. Vergewissern Sie sich, dass die Stromversorgung in Ihrem Haus für die erforderliche Maximallast geeignet ist. Berücksichtigen Sie dabei auch die anderen Elektrogeräte, die Sie verwenden.
Umwelttipps Umwelttipps Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet.
www.electrolux.com 132950480-00-392009 Benötigen Sie Zubehör, Verbrauchsmaterial und Ersatzteile? Dann besuchen Sie bitte unseren Onlineshop unter: www.aeg-electrolux.