LAVAMAT 84950 A User manual Washing machine
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Safety information Washing drum Door seal Drain pump Cleaning the water inlet filters Frost precautions Emergency emptying out What to do if… Technical data 25 26 26 27 28 29 29 33 Consumption values Installation instructions 33 34 Installation Unpacking Positioning and levelling Water inlet Water-stop device Water drainage Electrical connection Environment concerns Packaging materials Ecological hints 3 34 34 36 36 38 38 39 39 40 40 Subject to change without notice Operating instructions Safety info
Safety information • Do not use your appliance to wash articles with whalebones, material without hems or torn material. • Always unplug the appliance and turn off the water supply after use, cleaning and maintenance. • This appliance is provided with a white drum light. It is class 1, in accordance with IEC 60825-1:1993 + A1:1997 + A2:2001 standard. Should the appliance drum light need to be replaced, this must be carried out by a Service Centre.
Product description 5 Child Safety • This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • The packaging components (e.g.
Product description 2 1 3 4 5 6 7 1 2 3 4 5 6 7 Detergent dispenser drawer Control panel Drum light Door opening handle Rating plate Drain pump Adjustable feet
Control panel 7 Detergent dispenser drawer Compartment for detergent used for prewash . The prewash detergent is added at the beginning of the wash programme. Compartment for powder or liquid detergent used for main wash . Compartment for liquid additives (fabric softener, starch). Compartment for stain remover used for main wash with STAIN-option . Control panel Below is a picture of the control panel. It shows the programme selector dial as well as the buttons and the display.
Display 7 START/PAUSE button 8 DELAY START button 9 Display Display 9.8 9.9 9.7 9.6 9.1 9.2 9.3 9.4 9.5 9.1 - This position shows the water temperature of the washing cycle 9.2 - This position shows the selected spin speed and the following options symbols: NIGHT CYCLE , RINSE HOLD 9.3 - CHILD SAFETY LOCK symbol 9.4 - TIME SAVING options: (DAILY), (SUPER QUICK) 9.5 - The symbol of the delayed start (DELAY START) , STAIN , SENSITIVE , EXTRA RINSE 9.6 - Option symbols: PREWASH 9.
First use 9 Delay start If you have selected the button 8 , the relevant symbol 9.5 appears on the display. After having pressed the button 7 , the selected delay time value (max 20 hours) appears on the right side of the display with the corrisponding symbol. The delay time value decreases every minute ( 9.8 ). Incorrect option selection If a wrong option is selected the display says that it is not selectable.
Personalization Setting the time After the desired language you must set the time before the first wash. Remember to change the setting time in accordance with daylight-savings time or solar time. The CLOCK setting permits you to modify/set up the current time. It is important to keep it updated as the current END Cycle Time depends on it. To set the time press reaptedly the button 4 to select the SETTINGS menu and confirm your choice by pressing button 5 .
Daily use 11 Locate the BACK option by pressing the button 4 . Press the button 5 to confirm your choice. Daily use The appliance is provided with a weight sensor that permits to measure the quantity of laundry loaded into the drum and advices you on the detergent quantity to use. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the weight sensor. See chapter «Weight sensor».
Daily use Press any button or close the door to let the display show again the information about the washing programme. If settings are not undertaken for several seconds during the programme setting process, the loading information appears on the display when the door is open. The weight and the detergent quantity displayed for each programme are indicative and permits to reduce the detergent consumption.
Daily use 13 2. If required, pour fabric softener into the compartment marked (the amount used must not exceed the MAX mark in the drawer). Close the drawer gently. Select the temperature (button 2) Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The maximum temperatures for each washing programme can be checked in the paragraph «Washing programmes». .
Daily use Anyway, if an option, which is not compatible with the set washing programme or any other option, is selected, the message «Not selectable» will be displayed. You must select the options after you have selected the programme but before pressing the button 7 . Press the button 4 to activate the OPTIONS menu. To scroll all the available options, press the button 4 . The corresponding programme name appears in the relative rectangle to indicate that this programme can be selected.
Daily use 15 There are 2 memory spaces available for this purpose in the last 2 position of the programme selector dial. The saved programme can be selected in the same way as any other wash programme by means of the selector dial.
Daily use By pressing this button twice, the corresponding symbol and the message «SUPER QUICK» will appear on the display and you will be able to reduce the cycle duration. The display will show the reduced washing time. To be used only for very lightly soiled laundry. Select the START/PAUSE (button 7) Press this button, to start the selected programme. The corresponding red pilot light stops blinking.
Daily use 17 Cancelling a programme Turn the selector dial to and then in the new selected programme. Press the button 5 to cancel the programme which is running. Now press the button 7 to start the new programme. Opening the door after the programme has started First set the machine to Pause by pressing the button 7 .
Washing programmes Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options ALGODÓN 95°- Cold Main wash - Rinses - Long spin Max. load 8 kg - Reduced load 4 kg1) Maximum spin speed at 1400 rpm For white and coloured cotton (normally soiled items). SPIN REDUCTION CICLO NOCTURNO AGUA EN LA CUBA PRELAVADO 2) MANCHAS 3) - AQUACARE - SENSIBLE TIME SAVING ANTIBACTERIAS 60° Main wash - Rinses - Long spin Max.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options SINTÉTICOS 60°- Cold Main wash - Rinses - Short spin Max. load 4 kg - Reduced load 2 kg1) Maximum spin speed at 1200 rpm Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. SPIN REDUCTION CICLO NOCTURNO AGUA EN LA CUBA PRELAVADO 2) MANCHAS 3) - AQUACARE - SENSIBLE TIME SAVING ) PLANCHA FÁCIL PLUS 60°- Cold Main wash - Rinses - Short spin Max.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options CENTRIFUGAR Drain and long spin Max. load 8 kg Maximum spin speed at 1400 rpm Separate spin for hand washed cotton garments and after programmes with the Rinse Hold option selected. Before selecting this programme the selector dial must be turned to . You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun.
Washing programmes Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options EXPRESS INTENSIVO 60° - 40° Main wash - Rinses - Short spin Max. load 5 kg Maximum spin speed at 1200 rpm Quick washing programme, to be used for lightly soiled white/fast coloured cottons and mixed fabrics. SPIN REDUCTION AGUA EN LA CUBA AQUACARE SUPER ECO Cold Main wash - Rinses - Short spin Max. load 3 kg Maximum spin speed at 1200 rpm Mixed fabrics (cotton and synthetic).
Helpful hints and tips Helpful hints and tips Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. Temperatures 95° or 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60°/50° for normally soiled, colour fast garments (e.g. shirts, night dresses, pyjamas....
Helpful hints and tips 23 The following weights are indicative: pillow case, towelling towel, night dress, man’s shirt 200 g tea cloth, ladies’ briefs, napkin, blouse, men’s underpants 100 g Removing stains Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Care and cleaning Your appliance incorporates a recirculation system which allows an optimal use of the concentrated detergent. Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer . Degrees of water hardness Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority.
Care and cleaning 25 External cleaning Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly. Do not use methylated spirits, solvents or similar products to clean the cabinet. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4.
Care and cleaning Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. Drain pump The pump should be inspected regularly and particularly if: • the machine does not empty and/or spin • the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump. Proceed as follows: 1. Disconnect the appliance. 2. If necessary wait until the water has cooled down. 3. Open the pump door. 4. 5.
Care and cleaning 6. When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump. 7. Remove any objects from the pump impeller by rotating it. 8. Put the cap back on the emergency emptying hose and place the latter back in its seat. 27 9. Screw the pump fully in. 10. Close the pump door. WARNING! When the appliance is in use and depending on the programme selected there can be hot water in the pump.
Care and cleaning 1. Turn off the water tap. 2. Unscrew the hose from the tap. 3. Clean the filter in the hose with a stiff brush. 4. Screw the hose back onto the tap. Make sure the connection is tight. 5. Unscrew the hose from the machine. Keep a rug nearby because some water may flow. 6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the machine and make sure the connection is tight. 8. Turn on the water tap.
What to do if… 29 By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance. When you use the machine again, make sure that the ambient temperature is above 0°C. Emergency emptying out If the water is not discharged, proceed as follows to empty out the machine: 1. pull out the plug from the power socket; 2. close the water tap; 3. if necessary, wait until the water has cooled down; 4. open the pump door; 5.
What to do if… Problem Possible cause/Solution The washing machine does not start: The door has not been closed. «Please check that the door is closed properly and then press START/PAUSE» • Close the door firmly. The plug is not properly inserted in the power socket. • Insert the plug into the power socket. There is no power at the socket. • Please check your domestic electrical installation. The main fuse has blown. • Replace the fuse.
What to do if… Problem 31 Possible cause/Solution The drain hose is squashed or kinked. «Cannot drain the water. Please check that the filter is clean and then press button START/ PAUSE» • Check the drain hose connection. The drain filter is clogged. «Cannot drain the water. Please check that the filter is clean and then press button START/PAUSE» The machine does not empty and/or does not • Clean the drain filter.
What to do if… Problem Possible cause/Solution The door will not open: The programme is still running. • Wait the end of washing cycle. There is water in the drum. • Select drain or spin programme to empty out the water. For opening the door refer to display message. The machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted • Check the correct levelling of the appliance.
Technical data 33 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Technical data Dimensions Width Height Depth 60 cm 85 cm 63 cm Electrical connection Voltage - Overall power - Fuse Information on the electrical connection is given on the rating plate, on the inner edge of the appliance door.
Installation The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. Installation instructions Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again. 1.
Installation 3. Unscrew the three bolts with the key supplied with the machine. 4. Slide out the relevant plastic spacers. 5. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal.
Installation 6. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. 7. Connect the water inlet hose as described under the paragraph «Water inlet». Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubber coating.
Installation 1. Open the porthole and extract the inlet hose. 2. Connect the hose with the angled connection to the machine. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. 3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance.
Installation Water-stop device The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window «A» . Should this occur, turn the water tap off and refer to your Service Centre to replace the hose. Water drainage The end of the drain hose can be positioned in three ways: 1.
Electrical connection 39 The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre. Electrical connection Information on the electrical connection is given on the rating plate on the inner edge of the appliance door. Check that your domestic electrical installation can take the maximum load required, also taking into account any other appliances in use. WARNING! Connect the machine to an earthed socket.
Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Ecological hints To save water, energy and to help protect the environment, we recommend that you follow these tips: • Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).
132 951 740 - 00 - 342009 www.electrolux.
