LAVAMAT 5420 Lave-linge Informations pour les utilisateurs
Chère cliente, cher client, Veuillez lire attentivement cette notice d’utilisation dans son intégralité et la conserver pour une éventuelle consultation ultérieure. Veuillez la transmettre au propriétaire ultérieur éventuel de l’appareil. 1 3 2 2 Les symboles suivants sont utilisés dans ce document : Consignes de sécurité Avertissement ! Consignes concernant votre sécurité personnelle. Avertissement ! Consignes permettant d’éviter d’endommager l’appareil.
Sommaire Mode d'emploi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Protection de l’environnement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Bandeau de commande . . . . . . . . . . . . . . . . . . . .
Instructions de montage et de raccordement . . . . . . . . . . . 27 Consignes de sécurité pour l’installateur . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Installation de l’appareil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transport de l’appareil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enlever le dispositif de sécurité de transport . . . . . . . . . . . . . . . . . . . . . . . . .
Mode d'emploi 1 Sécurité Avant la première mise en service • Veuillez respecter les “Instructions d’installation et de raccordement”. • Si la livraison de l’appareil a lieu au cours des mois d’hiver par des températures au-dessous de zéro : avant de mettre le lave-linge en service, l’installer dans un lieu à température ambiante pendant 24 heures. Consignes d’utilisation • Le lave-linge est uniquement destiné au lavage de linge domestique usuel.
• Ne jamais mettre le lave-linge en service lorsque le câble d’alimentation électrique est endommagé ou bien lorsque le bandeau de commande, le plan de travail ou le socle sont endommagés de telle sorte que l’intérieur de l’appareil présente une ouverture accessible. • Mettre le lave-linge hors service avant tous travaux de nettoyage, d’entretien ou de maintenance.
Description de l’appareil Boîte à produits de lavage Bandeau de commande Plaque signalétique (derrière le hublot) Clapet du socle/ pompe de vidange Pieds à vis (réglables en hauteur) Bandeau de commande Touche essorage/ARRET CUVE PLEINE Touches de programmes additionnels Affichage du déroulement du programme Voyant PORTE Sélecteur de programmes Touche MARCHE/PAUSE 7
Tableau des programmes Programmes additionnels Charge max.
Utilisation/propriétés Programme d’économie d’énergie à 60 °C pour linge Blanc/Couleurs légèrement à moyennement sale en coton ou en lin. Etiquettes d’entretien1) MO Programme pour linge Blanc/Couleurs normalement sale à sale en coton/lin. JMO Programme pour textiles mélangés et synthétiques. IKN Programme délicat pour textiles tels que les fibres multicouches, les microfibres, les synthétiques, les rideaux (mettre rideaux max. de 15 à 20 m2).
Avant la première mise en service 1. Ouvrir la boîte pour produits de lavage. 2. Verser environ 1 litre d’eau dans le lave-linge par l’intermédiaire de la boîte à produits de lavage. Ainsi, lors du lancement du programme suivant, le réservoir d’eau de lavage se ferme et l’écluse ECO fonctionne correctement. 3. Afin d’éliminer des résidus éventuels après l’installation du tambour et du réservoir d’eau de lavage, effectuer le premier lavage sans introduire de linge.
Effectuer un programme de lavage Ouvrir le hublot/Introduire le linge 1. Ouvrir le hublot : tirer sur la poignée. Lorsque l’appareil est en service, les voyants K (PORTE) et S/P (MARCHE/PAUSE) signalent lorsque le hublot peut être ouvert : Voyant K (PORTE) Voyant S/P (MARCHE/PAUSE) Ouverture du hublot possible? clignote clignote oui, dans environ 2 minutes s’allume s’allume non, le niveau de l’eau ou la température est trop élevé(e) est éteint clignote oui 2.
• Si le degré de dureté de l’eau est de niveau 2 (moyen), il convient d’utiliser un détartrant. Il est alors toujours possible de doser le produit de lavage en fonction du degré de dureté 1 (= doux). L’organisme de distribution de l’eau de votre lieu d’habitation vous indiquera la dureté de l’eau dans votre région. 1. Tirer la boîte à produits de lavage jusqu’à la butée. 2. Introduire le produit de lavage/additifs 3. Repousser la boîte à produits de lavage complètement à l’intérieur.
Mettre l’appareil en service/sélectionner un programme 3 Sélectionner un programme et une température de lavage à l’aide du sélecteur de programmes. La sélection d’un programme met simultanément l’appareil en service. L’affichage du déroulement du programme signale les cycles de lavage du programme sélectionné. Modifier la vitesse d’essorage/sélectionner Arrêt cuve pleine 3 Le lave-linge propose la vitesse d’essorage maximale admissible correspondant au programme de lavage sélectionné.
Sélectionner un programme additionnel Si désiré, appuyer sur la/les touche(s) Programmes additionnels. Le voyant correspondant s’allume. v PRELAVAGE Prélavage à l’eau chaude avant le passage automatique au programme de lavage principal avec essorage intermédiaire c (BLANC/COULEURS) et m (TEXTILES MELANGES), sans essorage intermédiaire pour le programme d (DELICAT). } TACHES Destiné au lavage de linge très sale ou de linge taché.
Désactiver r+ (RINCAGE+) : 1. Positionner le sélecteur de programmes sur c (BLANC/COULEURS), m (TEXTILES MELANGES) ou d (DELICAT) (à la température choisie). 2. Appuyer simultanément sur les touches v (PRELAVAGE) et Q (COURT) jusqu’à ce que le voyant r+ (RINCAGE+) s’éteigne sur l’affichage du déroulement du programme. r+ (RINCAGE+) est alors durablement désactivé. Lancer le programme de lavage 3 1. Vérifier si le robinet d’arrivée d’eau est ouvert. 2. Appuyer sur la touche S/P (MARCHE/PAUSE).
Fin du programme de lavage/retirer le linge Dès que le programme de lavage est terminé, le voyant E (FIN) s’allume sur l’affichage du déroulement du programme. Le hublot peut être ouvert dès que le voyant K (PORTE) est éteint et que le voyant E (FIN) s’allume. 1. Ouvrir le hublot et retirer le linge. 2. Positionner le sélecteur de programmes sur O (ARRET). 3. Fermer le robinet d’arrivée d’eau. 4. Après le lavage, entrouvrir la boîte pour produits de lavage pour la laisser sécher.
Sécurité enfants Lorsque la sécurité enfants est enclenchée, le hublot ne peut plus être fermé. Activer la sécurité enfants : tourner le bouton rotatif (du côté intérieur du hublot) à l’aide d’une pièce de monnaie dans le sens d’une aiguille d’une montre jusqu’à la butée. 1 Avertissement ! Après le réglage, le bouton rotatif ne doit pas se trouver en position inclinée, sinon la sécurité enfants n’est pas activée. Le bouton doit ressortir comme sur la figure.
Nettoyage et entretien Avertissement ! Ne pas utiliser de produits caustiques pour meubles ou de produits abrasifs pour nettoyer l’appareil. Essuyer le bandeau de commande et le corps de l’appareil à l’aide d’un chiffon humide. Boîte pour produits de lavage Nettoyer régulièrement la boîte pour produits de lavage. 1. Enlever la boîte pour produits de lavage en tirant vigoureusement. 2. Retirer le compartiment pour assouplissant de la partie médiane de la boîte. 3. Nettoyer tous les éléments avec de l’eau.
Hublot et manchette en caoutchouc Vérifier régulièrement la présence éventuelle de dépôts ou d’éléments étrangers dans la manchette en caoutchouc ou à l’intérieur de la vitre du hublot. Nettoyer régulièrement la vitre du hublot et la manchette en caoutchouc.
Symptômes Le voyant E (FIN) clignote une fois et un signal sonore retentit simultanément une fois. (problème d’alimentation d’eau) Cause possible Solution Le robinet d’arrivée d’eau est Ouvrir le robinet d’arrivée fermé. d’eau. Le filtre situé dans le raccord Fermer le robinet d’arrivée vissé du flexible d’arrivée d’eau. Dévisser le flexible, end’eau est obstrué. lever le filtre et le nettoyer. Le robinet d’arrivée d’eau est Vérifier le robinet d’eau, le entartré ou défectueux.
Symptômes Cause possible Le flexible de vidange est plié. Le voyant E (FIN) clignote deux fois et un signal sonore retentit simultanément deux fois. (problème de vidange) Eliminer le pli. Dépassement de la hauteur Contacter le service aprèsmaximale de vidange de 1m. vente. La pompe de vidange est obstruée. Mettre l’appareil hors tension. Le débrancher. Nettoyer la pompe de vidange. Enlever les éléments étrangers du carter de la pompe. En cas de raccordement sur un siphon : Le siphon est obstrué.
Si la qualité du lavage n’est pas satisfaisante Le linge est grisâtre et du calcaire se dépose dans le tambour • Le dosage du produit de lavage est insuffisant. • Le produit de lavage utilisé est inadéquat. • Les salissures spécifiques n’ont pas fait l’objet d’un traitement préalable. • Le programme ou la température sélectionnés ne sont pas appropriés.
Effectuer une vidange de secours 1 Avertissement ! Avant de commencer une vidange de secours, mettre le lave-linge hors tension et le débrancher ! Avertissement ! L’eau de lavage qui s’écoule du flexible de vidange de secours peut être brûlante. Danger de brûlure par aspersion ! Laisser refroidir l’eau de lavage avant de procéder à une vidange de secours ! 1. Soulever le clapet du socle et le retirer. 2. Sortir le flexible de vidange de secours. 3. Placer une coupelle sur le sol.
Pompe de vidange 1 La pompe de vidange ne nécessite aucun entretien. Il n’est pas nécessaire d’ouvrir le couvercle de la pompe, excepté en cas de dysfonctionnement ou que la vidange s’interrompt comme par ex. lorsque la roue de la pompe est bloquée. Avant d’introduire le linge, veuillez toujours vérifier qu’il ne reste aucun élément étranger dans les poches ou entre les vêtements. Les trombones, épingles, etc.
7. Fermer le flexible de vidange de secours et le placer sur son support. 8. Fermer le clapet du socle. Caractéristiques techniques 5 Cet appareil est conforme aux directives CE suivantes : – directive 73/23/CEE du 19.02.1973 basse tension – directive 89/336/CEE du 03.05.1989 relative à la compatibilité électromagnétique (CEM) y compris la directive de révision 92/31/CEE – directive 93/68/CEE du 22.07.
Données de consommation et de durée Les données de consommation et de durée ont été élaborées conformément aux exigences des normes en vigueur. Elles peuvent diverger lors de l’usage domestique de l’appareil.
Instructions de montage et de raccordement 1 Consignes de sécurité pour l’installateur • Ce lave-linge n’est pas encastrable. • Avant de le mettre en service, vérifier qu’il n’ait pas subi de dommages pendant le transport. Ne brancher en aucun cas un appareil endommagé. En cas de dommages, veuillez contacter votre concessionnaire. • Avant la mise en service, retirer tous les éléments du dispositif de sécurité.
Installation de l’appareil Transport de l’appareil 1 Avertissement ! Le lave-linge est très lourd. Risque de blessures ! Le soulever avec précaution. • Ne pas poser l’appareil sur la face frontale ou sur le côté droit (vu de devant). Les éléments électriques peuvent se mouiller. • Ne jamais transporter l’appareil sans dispositif de sécurité.
3 La clé spéciale A et les couvercles B (2 pièces) et C (1 pièce) sont fournis avec l’appareil. 3. Enlever la vis D, y compris le ressort à pression, à l’aide de la clé spéciale A. 4. Relever le capuchon C comme indiqué sur l’illustration. 5. Refermer le trou avec le couvercle C. 6. Dévisser les deux vis E à l’aide de la clé spéciale A. 7. Dévisser les quatre vis F à l’aide de la clé spéciale A. 8. Enlever le rail de transport G. 9. Revisser les quatre vis F. 10.
Préparer le lieu d’installation Avertissement ! Ne pas installer l’appareil dans une pièce où il est susceptible de geler. Risque de dommages dus au gel ou altération des fonctions de l’appareil ! Les dommages dus au gel ne sont pas couverts par la garantie ! • Le plan d’installation doit être stable et plat. Ne pas installer l’appareil sur des moquettes ou des revêtements de sol souples.
Corriger les inégalités du sol L’appareil est muni de quatre pieds prémontés. Le réglage individuel de chaque pied permet de stabiliser l’appareil en compensant les inégalités du sol les plus importantes. Utiliser à cet effet la clé spéciale fournie. Avertissement ! Ne pas utiliser de cales en bois, en papier ou autres matériaux pour stabiliser l’appareil sur un sol inégal, mais régler les pieds.
Alimentation en eau 3 Un flexible à pression long de 1,35m est fourni avec l’appareil. Si un flexible d’arrivée d’eau plus long est nécessaire, utiliser exclusivement un flexible d’origine. Le service après-vente peut vous fournir des jeux de flexibles de différentes longueurs. Les joints d’étanchéité se trouvent soit dans les écrous en plastique des raccords vissés, soit dans le sachet d’accompagnement. Ne pas utiliser d’autres joints ! Avertissement ! Serrer les raccords vissés uniquement à la main. 1.
Vidanger l’eau La différence de hauteur entre le plan d’installation et le niveau de vidange de l’eau ne doit pas excéder 1 mètre. Seuls des flexibles d’origine peuvent être utilisés comme rallonges. (pose sur 3 m max. de sol et sur une hauteur maximale de 80 cm). Le service après-vente dispose de flexibles de vidange de différentes longueurs. Vidange de l’eau dans un siphon Fixer l’embout sur le siphon à l’aide d’un collier de serrage (disponible dans les magasins spécialisés).
Hauteurs de refoulement supérieures à 1 mètre La pompe de vidange du lave-linge peut refouler l’eau de lavage jusqu’à une hauteur de 1mètre à partir du plan d’installation de l’appareil. Avertissement ! Les hauteurs de refoulement supérieures à 1 mètre peuvent occasionner des dysfonctionnements ou endommager l’appareil. Pour se procurer le kit d’adaptation existant pour des hauteurs de refoulement supérieures à 1mètre, veuillez contacter le service aprèsvente.
Garantie Belgique DÉCLARATION DE CONDITIONS DE GARANTIE. Nos appareils sont produits avec le plus grand soin. Malgré cela, un défaut peut toujours se présenter. Notre service clientèle se chargera de réparer ceci sur demande, pendant ou après la période de garantie. La durée de vie de l'appareil n'en sera pas pour autant amputée. La présente déclaration de conditions de garantie est basée sur la Directive de l'Union Européenne 99/44/CE et les dispositions du Code Civil.
15. Hormis les cas où une responsabilité est imposée légalement, cette déclaration de conditions de garantie exclut toute indemnisation de dommages extérieurs à l'appareil dont le consommateur voudrait faire prévaloir les droits. Dans le cas d'une responsabilité reconnue légalement, la compensation n'excèdera pas la valeur d'achat de l'appareil. Ces conditions de garantie sont valables uniquement pour des appareils achetés et utilisés en Belgique.
Si vous devez nous contacter Belgique Electrolux Home Products Belgium ELECTROLUX SERVICE Bergensesteenweg 719 1502 Lembeek E-mail: consumer.services@electrolux.be Consumer services Téléphone 02/363.04.44 Téléfax 02/363.04.00 02/363.04.
Service après-vente En cas de problèmes techniques, vérifiez d’abord s’il ne vous est pas possible de réparer vous-même le dysfonctionnement à l’aide de la notice d’utilisation (chapitre „Que faire, si...“). Si vous ne parvenez pas à réparer le dysfonctionnement, veuillez contacter notre Consumer Services. Pour pouvoir vous dépanner dans les plus brefs délais, nous nécessitons les informations suivantes : – Désignation du modèle – Numéro du produit (PNC) – Numéro de série (S-No.
From the Electrolux Group. The world´s No.1 choice. Le Groupe Electrolux est le premier fabricant mondial d'appareils de cuisine, d'entretien et d'extérieur. Plus de 55 millions de produits du Groupe Electrolux (tels que réfrigérateurs, cuisinières, lave-linge, aspirateurs, tronçonneuses, tondeuses à gazon) sont vendus chaque année pour un montant d'environ 14 milliards de dollars US dans plus de 150 pays à travers le monde. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.