User manual

Programme progress

• The programme progress display shows the programme step that is

currently being carried out.

– (Prewash)

– (Main wash)

– (Rinse)

– (Extra Rinse)

– (Spin)

– (End)

• The multi-display shows the estimated time remaining (in hours and

minutes) until the end of the programme.

3 The remaining programme time may increase or briefly remain constant

during the wash programme as the programme adjusts to various con-

ditions while washing (e. g. type of washing, amount of washing, rec-

ognising out-of-balance when spinning, special rinse cycle, etc.).

Interrupting a programme/Adding washing

Interrupting a programme

• A washing programme can be interrupted at any time by pressing the

button (START/PAUSE) and then re-started by pressing the

button (START/PAUSE) again.

• To stop the washing machine before the programme has ended, turn

the programme knob to (OFF). Important: Be careful if there is

water in the appliance!

Adding washing

It is possible to add washing, as long as the (DOOR) light is lit green.

1. Press the

button (START/PAUSE). The door can be opened.

2. Close the door and press the

button (START/PAUSE) again. The

programme will continue.

End of the wash cycle/Removing the washing

When the programme has finished, (END) will illuminate on the pro-

gramme progress display. The door can be opened as soon as the in-

dicator (DOOR) is lit green.

1. Open the door and remove the washing.

2. Turn the programme knob to (OFF).

3. Close the water tap.