LAVAMAT LAVALOGIC 1620 Washing machine User information
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Switching on the appliance for the first time – setting the language 7 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MEMORY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving a programme setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clearing a stored programme setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . RINSE+, GENTLE SPIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. • If the appliance is delivered in the winter months when there are minus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time. Correct use • The washing machine is only designed for the washing of normal domestic laundry at home. • Additions or modifications to the washing machine are not permitted.
the case of a permanent connection – switch off the cut-out in the fuse box or remove the screw fuse completely. • If operation is stopped, disconnect the appliance from the mains supply and shut off the water tap. • Never unplug the appliance by pulling on the cable. Always pull the plug. • Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. • Never wash the washing machine down with a water jet.
Switching on the appliance for the first time – setting the language When switching on the appliance for the first time you should be sure to set the language in which you want the indicators in the display to appear. 1. Press the control knob. The appliance is now switched on. The languages that can be chosen will appear in the display. In the factory the language is preset to German. Important: If the display is not showing any languages, the appliance has been switched on before.
Description of the appliance Control panel with display Drawer for detergent and conditioner Rating plate (behind door) Door Three screw feet (height adjustable); rear left: Automatic foot Drain pump cover Control panel with display LINEN/EASY-C. 60°C 1600 RPM START 60° Buttons 1600 OPTIONS 10:17-12:16 î LINEN/EASY-C.) ENERGY SAVING COTTONS DELICATES WOOLLENS Control knob Display Indicators in the display Information panel shows programme, temperature and spin speed LINEN/EASY-C.
Main control features Control knob Switching the appliance on and off Press the control knob to switch the appliance on and off. Highlighting You can highlight the entries on the right of the display by turning the control knob. WOOLLENS 40°C 1200 RPM START 40° 1200 OPTIONS 10:17-10:54 î LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES WOOLLENS ) Cancelling settings If you would like to cancel settings that have been made by mistake, switch the appliance off and on again using the control knob.
Programme overview DELAY START SENSITIVE STAIN PRE WASH 1600 1400 1200 1000/800/600/400 RINSE HOLD Spin speed VERY QUICK Options • • • •2) • • • • • • • • • • • • • • • • • • • • • • • • • • • •2) • • • • max.
Use/Features Caresymbols1) General programme for coloured and easy-care items made of cotton/linen as well as for easy-care mixed fibres and synthetics. The wash programme is adjusted according to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3 kg. IKN JM Energy-saving and water-saving programme which washes at 60°C for lightly to normally soiled whites/coloureds made of cotton/linen.
• • • • • • • • 3kg • SPIN 6kg • • STARCH 6kg • • • 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton). 1400 1600 PRE WASH SHORT SPIN DRAIN 12 STAIN SENSITIVE DELAY START VERY QUICK QUICK Programme max.
Use/Features Drain and short spin after a rinse hold, or separate short spin of handwashed delicates, woollens, silk. Drain and spin, e.g. after a rinse hold, or separate spin for hand-washed cottons/ linens and easy-cares. Separate starching, conditioning, stiffening, treating of damp washing. Caresymbols1) IKN QLH JMO JMO Draining of the water after a rinse hold. 1) The figures in the care symbols indicate the maximum temperatures.
Before the first wash Setting the time So that the current time and the end of the programme are correctly displayed, please check the display and set the current time, if necessary. (See “Setting extra options: Timer”.) Carrying out a wash programme prior to first use Before doing your first wash, run a washing cycle without any washing in the machine (programme LINEN/EASY-C. 60°, option TIME SAVING/ VERY QUICK, use approx. 1/4 measuring cup of washing powder).
Running a washing cycle Switching on the appliance 3 Press the control knob. The appliance is now switched on. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the load sensor. Setting a programme 1. Highlight the desired programme, e.g. DELICATES. DELICATES 40°C 1200 RPM 11:25-12:36 î START 40° 1200 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Changing the temperature 2.
Selecting options You can select different options on top of the programme that has been selected. Only options that can be combined with the programme that has already been selected will be offered. TIME SAVING DELAY START SENSITIVE STAIN PRE WASH Shortened wash programme for more lightly soiled washing. The start of a programme can be delayed in steps of 30 minutes to a max. of 20 hours. Enhanced rinse action through an additional rinse cycle together with improved fabric care (decreased drum movement).
DELAY START 1. Press the OPTIONS key. 2. Use the control knob to highlight DELAY START. 3. Press the SELECT key. 4. Use the control knob to DELICATES 30°C 1000 RPM 11:25-14:06 highlight the time at which è the programme is to end. END OF PROGRAMME SELECT 5. Press the SELECT key. The 14:06 H:MIN ( BACK programme end time will change in the information panel. 6. Press the START key. Cancelling DELAY START: Press the START key again. The wash programme will start immediately. SENSITIVE/STAIN/PRE WASH 1.
Opening the door/Loading the washing 1. To open the door: carefully pull the handle on the door. 2. Unfold the washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. 3. Push the door firmly shut.
Adding detergent/conditioner Important: Only use detergents/conditioners that are suitable for use in domestic washing machines. Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging. The amount of detergent used depends on: – the washing’s degree of soiling, – the load size – the hardness of the tap water. Water softener should be used from water hardness range 2 (=medium).
Starting a programme 1. Check that the water tap is open. 2. Press the START key. The wash cycle is started. DELICATES 30°C 1000 RPM 11:25-12:36 î START 30° 1000 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Programme progress While the programme is DELICATES 30°C 1000 RPM 11:25-12:36 running, the display shows § PAUSE among other things: MAIN WASH – each stage of the pro###############=========] gramme as it progresses, 1000 MOISTURE 50 % e.g.
Washing cycle complete/Removing the washing At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the § symbol appears, the door can be opened. 1. Open the door using the handle. 2. Remove the washing. 3. Switch off the appliance. If Rinse Hold has been selected: 1. Press the START key. DELICATES 30°C RINSE HOLD 11:28-11:28 § START RINSE HOLD ###################### RINSE H. The display automatically changes to the first programme page.
Setting extra options Independent of any programme you can set different basic settings. These basic settings will permanently remain active until they are deselected again. MEMORY 1, 2, 3, 4 RINSE+ GENTLE SPIN LANGUAGE TIMER VOLUME Frequently used programme settings can be stored. The stored programme setting can then be selected like a normal programme. There are a total of four memory positions available.
4. Highlight the SENSITIVE option. 5. Press the SELECT key. The symbol will appear in the display. LINEN/EASY-C. 40°C 1200 RPM 10:17-12:16 ç START TIME SAVING DELAY START SENSITIVE) STAIN PRE WASH SELECT BACK EXTRAS 6. Press the EXTRAS key. MEMORY is highlighted: 7. Press the SELECT key. EXTRAS ì SELECT MEMORY( RINSE+ GENTLE SPIN. LANGUAGE BACK If MEMORY 1 is highlighted: 8. Press the SAVE key. The programme setting is stored as M1: LINEN/EASY-C. 9. Then press the BACK key 3 times.
RINSE+, GENTLE SPIN 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight the desired Extra, e.g. RINSE+. 4. Press the SELECT key. The symbol appears in the display. 5. Press the BACK key twice. EXTRAS ì SELECT MEMORY RINSE +) GENTLE SPIN LANGUAGE BACK LANGUAGE 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight LANGUAGE. 4. Press the SELECT key. 5. Use the control knob to highlight the desired language, e.g. ENGLISH. 6.
VOLUME 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight VOLUME. 4. Press the SELECT key. 5. Use the control knob to highlight OFF, NORMAL or LOUD. 6. Press the SELECT key. 7. Press the BACK key 3 times. EXTRAS VOLUME é SELECT BACK OFF§§§ NORMAL!) LOUD§§§ Child safety device When the child safety device is set, the door can no longer be closed.
Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5.
What to do if... Remedying small malfunctions yourself If one of the following fault messages is shown in the display during operation: – ATTENTION (E41)/PLEASE CLOSE THE DOOR – ATTENTION ERROR CODE (E11)/PLEASE OPEN THE TAP – ATTENTION ERROR CODE (E21)/PLEASE CHECK THE WATER DRAINAGE please have a look at the following table. After you have rectified the error, press the START key. If ATTENTION/PLEASE CALL YOUR LOCAL SERVICE FORCE together with an error code (e.g. E..
Problem Possible cause The drain pump runs constantly, even when the machine is The Aqua Control anti-flood switched off. system has responded. ATTENTION (EF3)/ PLEASE CALL YOUR LOCAL SERVICE FORCE appears in the display. Remedy Close the water tap, remove the mains plug from the socket and inform your local Service Force Centre. The transit packaging has not Removing the transit packbeen removed. aging. The washing machine vibrates when operating or is not stable.
Problem The display goes out while a wash cycle is running. Possible cause Power cut. For safety reasons, the door will remain locked for approx. 4 minutes. The background illumination of the display The washing machine is in has gone out even stand-by mode. though the appliance is switched on. Water is not entering the appliance. ATTENTION ERROR CODE (E11)/PLEASE OPEN THE WATER TAP appears in the display. The washing has not been spun thoroughly and water remains visible in the drum.
If the wash results are not satisfactory Washing is grey and scale is being deposited in the drum • Too little detergent is being used. • The right detergent was not used. • Special soiling was not pre-treated. • Programme or temperature was not correctly set. There are grey stains on the washing. • Washing soiled with ointment, grease or oil was washed with too little detergent. • It was washed at too low a temperature.
Carrying out an emergency drain 1 Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain. 1. Open the plinth flap and remove it. 2. Take out the emergency drain hose. 3. Place a shallow container underneath it.
Drain pump 1 The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught between the washing. Paperclips, nails, etc. that may have got into the washing machine with the washing remain in the pump housing (foreign body trap that protects the pump wheel).
Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 640 mm Depth when door is open 1017 mm Height adjustment approx. +10/-5mm Load (depending on programme) Max.
Installation and connection instructions 1 Safety information for the installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier. • Before using for the first time, all parts of the transit packaging must be removed.
Installing the appliance Transporting the appliance 1 Warning! The washing machine is very heavy. Risk of injury. Be careful when lifting. • Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet. • Never transport the appliance without its transit packaging. Only remove the transit packaging when the appliance is in its place of installation. Transporting the appliance without its transit packaging can lead to damage to the appliance.
3 Special spanner A and sealing caps B (2 off) and C (1 off) are supplied with the appliance. 3. Remove screw D with its compression spring using special spanner A. 4. Turn sealing cap C upside down as shown in the illustration. 5. Seal hole using sealing cap C. 6. Unscrew and remove two screws E using special spanner A. 7. Unscrew and remove four screws F using special spanner A. 8. Remove transit bar G. 9. Screw in the four screws F again. 10. Seal the two big holes using sealing caps B.
If the appliance is to stand on a plinth: In order for the appliance to be secure on the plinth, fixing plates*) must be mounted, into which the appliance is inserted. If the appliance is to stand on floors that vibrate, e. g. floors of wooden joists with deal boards: If possible, install the appliance in one corner of the room. 1. Screw a water-resistant wooden board (at least 15 mm thick) onto at least 2 of the floor joists. 2.
Electrical connection Details about the voltage, type of supply and the fuses required are to be found on the rating plate. The rating plate is next to the doorway. Connecting to the water supply Important! • This appliance must not be connected to the hot water system. • When connecting it, use only new hose kits. • Only connect the appliance to the drinking water supply. Rain water or water for industrial use may only be used if it fulfils the requirements of DIN1986 and DIN1988.
Water inflow 3 A 1.50 m long pressure hose is supplied with the appliance. If a longer water inlet hose is required, only original hoses are to be used. The Customer Care Department stocks hose kits of different lengths. Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts . Do not use any other seals. Important! All threaded hose fittings must only be tightened by hand. 1. Connect the hose with the right-angle connector to the machine.
Water drainage The maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre. Only original hoses may be used to extend hoses. (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Department stocks outlet hoses of different lengths. Draining water into a sink outlet Secure the outlet/sink outlet joint with a hose band clip (available from your dealer).
Guarantee Conditions Belgium DECLARATION OF GUARANTEE TERMS. Our appliances are produced with the greatest of care. However, a defect may still occur. Our consumer services department will repair this upon request, either during or after the guarantee period. The service life of the appliance will not, however, be reduced as a result. This declaration of guarantee terms is based on European Union Directive 99/44/EC and the provisions of the Civil Code.
These guarantee terms are only valid for appliances purchased and used in Belgium. For exported appliances, the user must first make sure that they satisfy the technical conditions (e.g.: voltage, frequency, installation instructions, type of gas, etc.) for the country concerned and that they can withstand the local climatic and environmental conditions. For appliances purchased abroad, the user must first ensure that they meet the qualifications required in Belgium.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg.hausgeraete.