LAVAMAT LAVALOGIC 1820 Washing machine User information
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. 1 3 2 2 The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Switching on the appliance for the first time – setting the language 7 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel with display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programme protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Child safety device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remedying small malfunctions yourself . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. • If the appliance is delivered in the winter months when there are minus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time. Correct use • The washing machine is only designed for the washing of normal domestic laundry at home. • Additions or modifications to the washing machine are not permitted.
General safety • Repairs to the washing machine must only be carried out by qualified service engineers. • Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. • Switch off the washing machine before cleaning, maintenance and servicing.
Switching on the appliance for the first time – setting the language When switching on the appliance for the first time you should be sure to set the language in which you want the indicators in the display to appear. 1. Press the control knob. The appliance is now switched on. The languages that can be chosen will appear in the display. In the factory the language is preset to English. Important: If the display is not showing any languages, the appliance has been switched on before.
Description of the appliance Control panel with display Drawer for detergent and conditioner Rating plate (behind door) Door Three screw feet (height adjustable); rear left: Automatic foot Drain pump cover Control panel with display LINEN/EASY-C. 60°C 1800 RPM START 60° Buttons 1800 OPTIONS 10:17-12:16 î LINEN/EASY-C.
Main control features Control knob Switching the appliance on and off Press the control knob to switch the appliance on and off. Highlighting You can highlight the entries on the right of the display by turning the control knob. WOOLLENS 40°C 1200 RPM START 40° 1200 OPTIONS 10:17-10:54 î LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES WOOLLENS ) Cancelling settings If you would like to cancel settings that have been made by mistake, switch the appliance off and on again using the control knob.
Programme overview Options Spin speed DELICATES 40, 30, 20 WOOLLENS 40, 30, COLD 1800/1600/1400 1200/1000/ 800/600/400 RINSE HOLD 6kg1) PRE WASH COTTONS 95 STAIN 6kg1) SENSITIVE ENERGY SAVING4) DELAY START 6kg1) or 3kg VERY QUICK LINEN/EASY-CARES 60, 50, 40, 30, 20 QUICK Programme max.
Use/Features General programme for coloured and easy-care items made of cotton/linen as well as for easy-care mixed fibres and synthetics. The wash programme is adjusted according to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3kg. Energy-saving and water-saving programme which washes at 60°C for lightly to normally soiled whites/coloureds made of cotton/linen. Programme for normally to heavily soiled whites made of cotton/linen.
Programme DRAIN 12 • TIME SAVING SHORT SPIN 3kg • SPIN 6kg • • • STARCH 6kg • • • RINSE HOLD 1200/1000/ 800/600/400 1800/1600/1400 PRE WASH STAIN SENSITIVE DELAY START VERY QUICK QUICK max.
Use/Features Drain and short spin after a rinse hold, or separate short spin of handwashed delicates, woollens, silk. Drain and spin, e.g. after a rinse hold, or separate spin for hand-washed cottons/ linens and easy-cares. Separate starching, conditioning, stiffening, treating of damp washing. Caresymbols1) IKN QLH JMO JMO IKN Draining of the water after a rinse hold. 1) The figures in the care symbols indicate the maximum temperatures.
Before the first wash Setting the time So that the current time and the end of the programme are correctly displayed, please check the display and set the current time, if necessary. (See “Setting extra options: Timer”.) Carrying out a wash programme prior to first use Before doing your first wash, run a washing cycle without any washing in the machine (programme LINEN/EASY-C. 60°, option TIME SAVING/ VERY QUICK, use approx. 1/4 measuring cup of washing powder).
Running a washing cycle Switching on the appliance 3 Press the control knob. The appliance is now switched on. Before switching the appliance on, make sure that the drum is empty. If you do not, the washing will subsequently not be registered properly by the load sensor. Setting a programme 1. Highlight the desired programme, e.g. DELICATES. DELICATES 40°C 1200 RPM 11:25-12:36 î START 40° 1200 OPTIONS LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS Changing the temperature 2.
Changing the spin speed 3 3. Press the key for the spin speed repeatedly until the desired spin speed appears e.g. 1000 or the RINSE HOLD. RINSE HOLD means: the washing is left to soak in the last rinse water and is not spun. If required, set options. DELICATES 30°C 1000 RPM START 30° 1000 OPTIONS 11:25-12:36 î LINEN/EASY-C. ENERGY SAVING COTTONS DELICATES) WOOLLENS . Selecting options You can select different options on top of the programme that has been selected.
TIME SAVING 1. Press the OPTIONS key. 2. Use the control knob to highlight TIME SAVING. 3. Press the SELECT key. 4. Use the control knob to DELICATES 30°C 1000 RPM 11:25-12:36 highlight VERY QUICK. è 5. Press the SELECT key. The TIME SAVING¶¶¶¶ SELECT symbol appears in the NORMAL!¶ display. BACK VERY QUICK¶¶) DELAY START 1. Press the OPTIONS key. 2. Use the control knob to highlight DELAY START. 3. Press the SELECT key. 4.
Opening the door/Loading the washing 1. To open the door: carefully pull the handle on the door. 2. Unfold the washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. 3. Push the door firmly shut.
Adding detergent/conditioner Important: Only use detergents/conditioners that are suitable for use in domestic washing machines. 1 For USA and Canada only! Important! Only LOW-SUDSING detergent suitable for a front-loading washing machine can be used in this machine. This machine can heat the water up to 95 degrees celsius, or 200 degrees fahrenheit, and care should be taken to ensure that the correct washing powder is used. If you have any doubt, check with your dealer or the distributor.
Softener, wash-care products to preserve the shape of garments, starch Fill the compartment to no more than the MAX indicator. Add water to thick liquid concentrates in accordance with the manufacturer’s instructions before using them. Dissolve powder starches. If you are using liquid detergent: Add liquid detergent using the dosage containers provided by the detergent manufacturer. Starting a programme 1. Check that the water tap is open. 2. Press the START key. The wash cycle is started.
Interrupting a programme/Adding washing Interrupting a programme • The wash programme can be temporarily interrupted at any time by pressing the PAUSE key. It is then re-started by pressing the key again. • To cancel a programme before it has finished, switch off the appliance (press the control knob).
Washing cycle complete/Removing the washing At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the §symbol appears, the door can be opened. 1. Open the door using the handle. 2. Remove the washing. 3. Switch off the appliance. If Rinse Hold has been selected: 1. Press the START key. DELICATES 30°C RINSE HOLD 11:28-11:28 § START RINSE HOLD ###################### RINSE H. The display automatically changes to the first programme page.
Setting extra options Independent of any programme you can set different basic settings. These basic settings will permanently remain active until they are deselected again. MEMORY 1, 2, 3, 4 RINSE+ GENTLE SPIN LANGUAGE TIMER VOLUME Frequently used programme settings can be stored. The stored programme setting can then be selected like a normal programme. There are a total of four memory positions available.
4. Highlight the SENSITIVE option. 5. Press the SELECT key. The symbol will appear in the display. LINEN/EASY-C. 40°C 1200 RPM 10:17-12:16 ç START TIME SAVING DELAY START SENSITIVE) STAIN PRE WASH SELECT BACK EXTRAS 6. Press the EXTRAS key. MEMORY is highlighted: 7. Press the SELECT key. EXTRAS ì SELECT MEMORY( RINSE+ GENTLE SPIN. LANGUAGE BACK If MEMORY 1 is highlighted: 8. Press the SAVE key. The programme setting is stored as M1: LINEN/EASY-C. 9. Then press the BACK key 3 times.
RINSE+, GENTLE SPIN 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight the desired Extra, e.g. RINSE+. 4. Press the SELECT key. The symbol appears in the display. 5. Press the BACK key twice. EXTRAS ì SELECT MEMORY RINSE +) GENTLE SPIN LANGUAGE BACK LANGUAGE 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight LANGUAGE. 4. Press the SELECT key. 5. Use the control knob to highlight the desired language, e.g. ENGLISH. 6.
VOLUME 1. Press the OPTIONS key. 2. Press the EXTRAS key. 3. Use the control knob to highlight VOLUME. 4. Press the SELECT key. 5. Use the control knob to highlight OFF, NORMAL or LOUD. 6. Press the SELECT key. 7. Press the BACK key 3 times. EXTRAS VOLUME é § SELECT BACK OFF§§§ NORMAL!) LOUD§§§ Programme protection In order to protect the selected settings of a programme that is running from unintentional alterations, the buttons can be locked. Setting programme protection: 1. Start the programme. 2.
Child safety device When the child safety device is set, the door can no longer be closed. Setting the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise direction as far as it will go. 1 Warning! The knob must not be sunk-in after being set, otherwise the child safety device is not active. The knob must stand out as shown in the illustration. Releasing the child safety device: Turn the knob anti-clockwise as far as it will go.
Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth. Cleaning procedure If you plan to wash mainly at low temperature, you should run a hot programme from time to time. This will reduce any deposits and clean the appliance from the inside. Detergent dispenser drawer The detergent dispenser drawer should be cleaned regularly. 1. Remove the detergent dispenser drawer by pulling it firmly. 2.
Door and rubber collar Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door. Clean the glass in the door and the rubber collar regularly. What to do if...
Problem The programme does not begin after the START key has been pressed. ATTENTION(E41)/ PLEASE CLOSE THE DOOR appears in the display. Possible cause The door is not closed properly. The drain pump runs constantly, even when the machine is The Aqua Control anti-flood switched off. system has responded. ATTENTION (EF3)/ PLEASE CALL YOUR LOCAL SERVICE FORCE appears in the display. The washing machine vibrates when operating or is not stable. Washing has not been spun.
Problem Possible cause The door cannot be opened when the appliance is switched on. The symbol appears in the display. The door is locked for safety reasons. The display goes out while a wash cycle is running. Power cut. For safety reasons, the door will remain locked for approx. 4 minutes. The background illumination of the display The washing machine is in has gone out even stand-by mode. though the appliance is switched on. Water is not entering the appliance.
If the wash results are not satisfactory Washing is grey and scale is being deposited in the drum • Too little detergent is being used. • The right detergent was not used. • Special soiling was not pre-treated. • Programme or temperature was not correctly set. There are grey stains on the washing. • Washing soiled with ointment, grease or oil was washed with too little detergent. • It was washed at too low a temperature.
Carrying out an emergency drain 1 Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain. 1. Open the plinth flap and remove it. 2. Take out the emergency drain hose. 3. Place a shallow container underneath it.
Drain pump 1 The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught between the washing. Paperclips, nails, etc. that may have got into the washing machine with the washing remain in the pump housing (foreign body trap that protects the pump wheel).
Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance W 1 The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 603 mm Depth when door is open 980 mm Height adjustment approx. +10/-5mm Load (depending on programme) Max.
Installation and connection instructions 1 Safety information for the installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier. • Before using for the first time, all parts of the transport lock must be removed.
Installing the appliance Transporting the appliance 1 Warning! The washing machine is very heavy. Risk of injury. Be careful when lifting. • Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet. • Never transport the appliance without its transport lock. Only remove the transport lock when the appliance is in its place of installation. Transporting the appliance without its transport lock can lead to damage to the appliance.
3. Remove both plastic caps sideways. 3 Special spanner A and sealing caps B (2 off) and C (1 off) are supplied with the appliance. 4. Remove screw D with its compression spring using special spanner A. 5. Turn sealing cap C upside down as shown in the illustration. 6. Seal hole using sealing cap C. 7. Unscrew and remove two screws E using special spanner A. 8. Unscrew and remove four screws F using special spanner A. 9. Remove transit bar G. 10. Screw in the four screws F again. 11.
Where to install Important! The appliance must not be used in a room where there is a danger of frost. Frost damage or impaired operation! Frost damage is not covered by the warranty. • The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpets or on soft floor coverings. • The surface on which the appliance is to be installed must be clean and dry and free from coverings that move, so that the appliance does not slide.
The four feet of the appliance are pre-adjusted. Large degrees of unevenness can be compensated for by individually adjusting the height adjustable screw feet. Use the special spanner supplied to do this. Important! Do not use pieces of wood, cardboard or such like to level out unevenness in the floor, but adjust the height adjustable screw feet instead. Electrical connection Details about the voltage, type of supply and the fuses required are to be found on the rating plate.
Water inflow 3 A 1.50 m long pressure hose is supplied with the appliance. If a longer water inlet hose is required, only original hoses are to be used. The Customer Care Department stocks hose kits of different lengths. Sealing rings are either inserted in the nuts of the threaded hose fitting or are included as spare parts . Do not use any other type of sealing rings. Important! All threaded hose fittings must only be tightened by hand. 1. Connect the hose with the right-angle connector to the machine.
Water drainage The maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre. Only original hoses may be used to extend hoses. (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Department stocks outlet hoses of different lengths. Draining water into a sink outlet Secure the outlet/sink outlet joint with a hose band clip (available from your dealer).
Guarantee/Customer Service Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG-Electrolux agents’ own guarantee conditions are applicable. Please obtain further details direct. Autres agences étrangères assurant le service après-vente Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables.
Australia The Andi-Co Group 1 Stamford Road Oakleigh VIC 3166 Tel.: (03) 9569 1255 Fax: (03) 9569 1450 www.andico.com.au Korea (South) Core Incorp. 3/F Chewoo Bldg. 200 Nonhyun-Dong Kangnam-Ku 135-010 Seoul Telefon 82 2 549 89 61 Namibia AEG NAMIBIA (PTY) LIMITED-Jeppe Street Northern Industrial Area Windhoek Tel.: (061) 21-6082/4 Fax: (061) 217838 Bahrain/Arabian Gulf A.A. Zayani & Sons P.O. Box 9 32 Bahrain Tel.: 17311124 Croatia Electrolux D.O.O. Suplova 7 10000 Zagreb Tel.
Japan Electrolux Japan Ltd. Domestic Appliances Department Maruzen Showa Warehouse Building Tookai 4-5-12, Ota-ku 143-006 Tokyo Tel.: 0120-13-7117 Fax: 03-3790-5257 Singapore Group Pte Ltd. 833 Bukit Timah Road Unit no. 01-11 Royalville 279887 Singapore Tel.: 0065 64638484 Fax: 0065 64638488 Slovenia Electrolux Slovenia D.O.O. Traska Ul. 132 1000 Ljubljana Tel.: 61 1234 137 Fax: 61 1234 238 Thailand Olympia Thai Tower, 444 Rachadapiser Road Samsennok- Huaykwang 10320 Bangkok Thailand Tel.
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
p t b Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87 Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul. Kolejowa 5/7, Warsaw Portugal +35 12 14 40 39 39 Quinta da Fonte - Edificio Gonçalves Zarco - Q 35 2774 - 518 Paço de Arcos Romania +40 21 451 20 30 Str.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.electrolux.
