LC 53300 Notice d'utilisation Lave-linge
Sommaire Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Consignes de sécurité Arrivée d'eau Vidange de l'eau BRANCHEMENT ÉLECTRIQUE 26 27 28 ENVIRONNEMENT Matériaux d'emballage Conseils écologiques 3 29 29 29 Sous réserve de modifications NOTICE D'UTILISATION CONSIGNES DE SÉCURITÉ Veuillez lire attentivement cette notice et la conserver pour toute consultation future. • La sécurité de nos appareils est conforme aux règles reconnues de la technique et à la législation sur la sécurité des appareils.
Consignes de sécurité • Groupez les petits articles, tels que les chaussettes, ceintures lavables en machine etc., dans un petit sac de toile ou une taie, afin d'éviter que ces pièces ne glissent entre le tambour et la cuve. • Ne lavez pas en machine le linge avec des baleines, les tissus non ourlés ou déchirés. • Débranchez toujours la prise de courant et fermez le robinet de l'eau après chaque utilisation et avant le nettoyage et l'entretien de l'appareil.
Description de l'appareil 5 • N'utilisez jamais l'appareil si le câble d'alimentation, le bandeau de commande, le plan de travail ou le socle sont endommagés de manière telle que l'intérieur de l'appareil est accessible.
Description de l'appareil Face avant de l'appareil 1 2 3 4 1 2 3 4 Boîte à produits Bandeau de commandes Poignée d'ouverture du hublot Pieds réglables (avant)
Description de l'appareil Face arrière de l'appareil 1 2 3 4 1 2 3 4 Dispositifs de sécurité pour le transport Tuyau de vidange Câble d'alimentation Tuyau d'arrivée d'eau Boîte à produits Lessive en poudre ou liquide pour le lavage principal. Si vous utilisez une lessive liquide, versez-la juste avant de démarrer le programme. Additifs liquides (assouplissant, amidon). L'assouplissant ou les additifs d'amidon doivent être versés dans le compartiment avant le départ du programme de lavage.
Bandeau de commande BANDEAU DE COMMANDE 1 2 3 4 5 6 7 8 Dorénavant, le sélecteur de programmes, d'essorage, les différentes touches et les voyants seront signalés tout au long de la notice par les numéros correspondants indiqués dans le tableau ci-dessous.
Avant la première utilisation 9 AVANT LA PREMIÈRE UTILISATION AVERTISSEMENT Assurez-vous que les raccordements électriques et hydrauliques sont conformes aux instructions d'installation. Retirez tout ce qui se trouve dans le tambour. Nous vous recommandons d'effectuer un cycle de lavage à vide pour évacuer tous résidus résultant du processus de fabrication. Versez environ 100 ml de détergent directement dans le tambour et lancez un cycle couleurs à 60°C.
Utilisation quotidienne Versez, si besoin, l'assouplissant dans le plus petit compartiment ( sans dépasser le niveau "MAX"). Fermez délicatement la boîte à produits. Sélectionnez le programme souhaité à l'aide du sélecteur de programmes (8). Vous trouverez le programme approprié pour le type de linge en vous conformant aux descriptions des tableaux de programmes (veuillez vous reporter au chapitre "Programmes de lavage"). Tournez le sélecteur sur le programme souhaité.
Utilisation quotidienne 11 En choisissant cette option, les phases d'essorage sont supprimées. Cette option peut être utilisée pour le linge très délicat. Le lave-linge effectuera 3 rinçages supplémentaires pour les programmes COTON et 1 rinçage supplémentaire pour les programmes SYNTHÉTIQUES. Sélectionnez la vitesse d'essorage, l'option ARRÊT CUVE PLEINE ou EXCLUSION D'ESSORAGE en tournant le sélecteur de vitesse d'essorage.
Utilisation quotidienne Vous devez sélectionner cette option après avoir réglé le programme et avant d'appuyer sur la touche 4 . Vous pouvez modifier ou annuler le départ différé à tout moment, avant d'appuyer sur la touche 4 . Annulation du départ différé après la sélection de la touche 4 : 1. Mettez le lave-linge en pause en appuyant sur la touche 4 . 2. Appuyez une fois sur la touche 5 , le voyant correspondant au délai sélectionné s'éteint. 3.
Programmes de lavage 13 Si vous ne parvenez pas à ouvrir le hublot mais que cela est absolument nécessaire, mettez l'appareil à l'arrêt en tournant le sélecteur sur la position " AUS/ARRÊT ". Le hublot pourra être ouvert au bout de quelques minutes. (Attention au niveau et à la température de l'eau !) Après cette procédure, il faudra resélectionner le programme et les options, puis appuyer sur la touche 4 . À la fin du programme L'appareil s'arrête automatiquement.
Programmes de lavage Programme/Température Description du programme Type de linge Options KOCH-/BUNTWÄSCHE 60 E COULEURS 60 E 60° Coton blanc et couleur bon teint ECO Ce programme peut être sélectionné pour les articles en coton peu ou normalement sales. La température est réduite et la durée de lavage prolongée. Ce programme permet donc d’obtenir un lavage efficace tout en réalisant des économies d’énergie.
Conseils utiles Programme/Température 15 Description du programme Type de linge Options SPÜLEN RINÇAGE Ce programme permet de rincer et d'essorer des vêtements en coton qui ont été lavés à la main. Le lave-linge effectue 3 rinçages, suivis d'un dernier essorage long. La vitesse d'essorage peut être réduite en appuyant sur la touche correspondante.
Conseils utiles Températures 95° ou 90° Pour le lin et le coton blancs normalement sales (par exemple, torchons, serviettes, nappes, draps, etc.) 60°/50° Pour les articles bon teint normalement sales (par exemple, les chemises, les chemises de nuit, les pyjamas, etc.
Conseils utiles 17 Nous vous donnons les poids moyens suivants à titre indicatif : nappe 250 g taie, serviette, chemise de nuit, chemise 200 g torchon, slips, serviette de table, chemisier 100 g Traitement des taches Les taches résistantes ne s'éliminent pas toujours avec de l'eau et de la lessive. Il est donc conseillé de les traiter avant le lavage. Sang : traitez les taches fraîches avec de l'eau froide.
Entretien et nettoyage • lessives liquides, de préférence pour les programmes de lavage à températures peu élevées (60°C max.) pour tous les types de tissus, ou lessives spéciales pour les lainages uniquement. La lessive et les additifs doivent être versés dans les compartiments correspondants de la boîte à produits avant le démarrage du programme. Pour les lessives liquides, sélectionnez un programme sans prélavage.
Entretien et nettoyage 19 Procédez comme suit : • Le tambour doit être vide. • Sélectionnez le programme de lavage pour coton le plus chaud. • Utilisez une mesure de lessive normale, un type de poudre ayant des propriétés biologiques. La carrosserie Nettoyez-la à l'eau savonneuse. Rincez et séchez soigneusement. N'utilisez jamais d'alcool, de produits abrasifs ou caustiques. Nettoyage de la boîte à produits Les compartiments à lessive et à produits additifs doivent faire l'objet d'un nettoyage régulier.
En cas d'anomalie de fonctionnement Nettoyage du filtre du tuyau d'alimentation Si l'eau est très dure ou contient des traces de dépôts de calcaire, le filtre peut se boucher. Il est donc recommandé de le nettoyer de temps en temps. Fermez le robinet d'arrivée d'eau. Dévissez l'embout du tuyau d'arrivée. Nettoyez le filtre avec une petite brosse dure. Revissez l'embout du tuyau d'arrivée et vérifiez le raccordement.
En cas d'anomalie de fonctionnement 21 • 1 clignote : problème d'arrivée d'eau. • 2 clignote : problème d'évacuation d'eau. • 4 clignote : hublot ouvert. Le problème une fois résolu, appuyez sur la touche DEMARRAGE pour redémarrer le programme Si le problème persiste malgré toutes les vérifications, contactez votre service après-vente. Anomalie Cause possible/Solution L'appareil ne démarre pas : Le hublot n'est pas fermé. • Fermez correctement le hublot. L'appareil n'est pas correctement branché.
En cas d'anomalie de fonctionnement Anomalie Cause possible/Solution Il y a de l'eau au pied de l'appareil : Vous avez utilisé trop de lessive ou une lessive qui n'est pas adaptée au lavage en machine (trop de mousse). • Réduisez la quantité de lessive ou utilisez une lessive plus adaptée. Vérifiez que les raccordements des tuyaux d'arrivée sont étanches. Il n'est pas toujours facile de voir si de l'eau s'écoule le long du tuyau ; vérifiez s'il est mouillé.
Valeurs de consommation 23 Anomalie Cause possible/Solution L'essorage démarre tardivement ou l'appareil n'essore pas : Le dispositif de sécurité anti-balourd électronique s'est activé parce que le linge n'est pas bien réparti dans le tambour. Pour mieux répartir le linge, le tambour effectue des rotations dans les deux sens, et ce jusqu'à ce qu'il n'y ait plus de balourd. Ensuite, l'appareil procèdera normalement à l'essorage.
Caractéristiques techniques Les données de consommation qui figurent dans le tableau sont fournies à titre indicatif, car elles peuvent varier en fonction de la quantité et du type de linge, de la température d'arrivée de l'eau ainsi que de la température ambiante. Elles se réfèrent à la température la plus élevée pour chaque programme.
Installation 25 Déballage Cet appareil est livré avec des dispositifs de protection (emballages / fixations, ...) qui protègent le tambour et le moteur lors du transport. Ces dispositifs de protection doivent être retirés avant la première utilisation de l’appareil. Conservez ces dispositifs de protection afin qu'ils puissent être remontés pour tout autre transport de l'appareil. 1. Placez sur le sol, derrière l'appareil, une des cales de polystyrène puis inclinez l'arrière de l'appareil sur la cale.
Installation 4. Avec une clé adaptée, dévissez les trois vis à l'arrière de l'appareil et retirez les 3 goujons en plastique. 5. Bouchez les trous à l'aide des caches plastique fournis avec l'appareil (dans le sachet en plastique contenant la notice d'utilisation, placé dans le tambour). Aufstellung Placez l'appareil sur un sol plat et dur. Veillez à ce que la circulation d’air autour de l'appareil ne soit pas entravée par des tapis, moquettes, etc.
Installation 27 1. Raccordez le tuyau d'arrivée d'eau à un robinet fileté (3/4 po). Utilisez toujours le tuyau fourni avec l'appareil. 2. L'autre extrémité du tuyau d'arrivée raccordée au lave-linge peut être orientée librement. Ajustez correctement le tuyau en dévissant la bague de serrage. Après avoir positionné le tuyau d'alimentation, veillez à revisser correctement la bague de serrage pour éviter toute fuite. Le tuyau d'alimentation ne doit pas être rallongé.
Branchement électrique • Dans une conduite d'évacuation du lavabo. Vous pouvez connecter le tuyau d'évacuation directement à une conduite existante (sous le lavabo ou l'évier, par exemple) en amont du siphon. Disposez le tuyau de façon à ce que la crosse soit à un niveau correspondant au bord supérieur et fixez-le. 650-800 mm • En hauteur, dans un conduit dont la distance par rapport au sol sera comprise entre 65 cm et 80 cm.
Environnement 29 Les informations concernant le branchement électrique figurent sur la plaque signalétique apposée sur le bord intérieur du hublot de l'appareil. Vérifiez que le compteur de l'abonné et les fusibles peuvent supporter l'intensité absorbée par la machine compte tenu des autres appareils électriques branchés. AVERTISSEMENT Branchez l'appareil sur une prise reliée à la terre.
• Le linge normalement sale ne nécessite pas de prélavage : vous réaliserez des économies de lessive, d'eau et de temps (l'environnement s'en trouvera également protégé !). • L'appareil fonctionne de manière plus économique s'il est rempli à pleine capacité en veillant toutefois à ne pas surcharger le tambour. • Les taches et les petites salissures peuvent être éliminées au moyen d'un pré-traitement adéquat ; le linge peut alors être lavé à une température plus basse.
192992111-A-382010 www.aeg-electrolux.