LAVATHERM 59800 Kondensationstrockner mit Wärmepumpe Benutzerinformation
Sehr geehrte Kundin, sehr geehrter Kunde, lesen Sie bitte diese Benutzerinformation sorgfältig durch und bewahren Sie sie zum späteren Nachschlagen auf. Geben Sie diese Benutzerinformation an eventuelle Nachbesitzer des Gerätes weiter. 1 3 2 2 Folgende Symbole werden im Text verwendet: Sicherheitshinweise Warnung! Hinweise, die Ihrer persönlichen Sicherheit dienen. Achtung! Hinweise, die zur Vermeidung von Schäden am Gerät dienen.
Inhalt Gebrauchsanweisung. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sicherheit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Entsorgung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Umwelttipps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Gerätebeschreibung . . . . . . . . . . . . . .
Aufstell- und Anschlussanweisung . . . . . . . . . . . . . . . . . . . . . . . 26 Sicherheitshinweise für die Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Gerät transportieren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Transportsicherung entfernen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Elektrischer Anschluss. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gebrauchsanweisung 1 Sicherheit Vor der ersten Inbetriebnahme • Beachten Sie die „Aufstell- und Anschlussanweisung“ • Vor Inbetriebnahme das Gerät auf Transportschäden überprüfen. Ein beschädigtes Gerät auf keinen Fall anschließen. Wenden Sie sich im Schadensfall an Ihren Lieferanten. Bestimmungsgemäße Verwendung • Der Trockner ist nur zum Trocknen haushaltsüblicher Wäsche im Haushalt bestimmt. • Umbauten oder Veränderungen am Trockner sind nicht zulässig.
• Die Abdeckhaube der Glühlampe für die Trommelbeleuchtung muss fest verschraubt sein. Sicherheit von Kindern • Verpackungsteile von Kindern fernhalten. Erstickungsgefahr! • Kinder können Gefahren, die im Umgang mit Elektrogeräten liegen, oft nicht erkennen. Lassen Sie Kinder nicht unbeaufsichtigt beim Trockner. • Stellen Sie sicher, dass Kinder oder Kleintiere nicht in die Trommel des Trockners klettern. Lebensgefahr! Halten Sie die Tür des Trockners geschlossen, wenn er nicht benutzt wird.
2 1 Altgerät auf dem Produkt oder seiner Verpackung weist darauf Das Symbol hin, dass dieses Produkt nicht als normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt und Gesundheit werden durch falsches Entsorgen gefährdet.
Gerätebeschreibung Schublade mit Kondensatbehälter Bedienblende Feinsieb (Flusensieb) Lampe für Innenbeleuchtung Grobsieb (Flusensieb) Microfeinfilter (Flusensieb) Typschild Einfülltür (Anschlag wechselbar) Sockeltür vor Flusenfilter und Wärmetauscher Schraubfüße (höhenverstellbar) Luftschlitze Bedienblende Taste RESTFEUCHTE TrockengradAnzeige Multidisplay Taste ZEITVORWAHL Tasten- und Anzeigenblock 8 Programmwähler Programmablauf-Anzeige Wartungs-Anzeigen – BEHÄLTER (leeren!) – SIEB TÜR (Fl
Vor dem ersten Trocknen 1 Wenn das Gerät nicht aufrecht transportiert wurde, lassen Sie es vor Anschluss an das Netz und vor der ersten Inbetriebnahme 12 Stunden stehen, damit das Öl zum Kompressor zurückfließen kann. Andernfalls könnte der Kompressor beschädigt werden. 1. Um eventuelle fertigungsbedingte Rückstände zu entfernen, Trommel des Trockners mit einem feuchten Tuch auswischen oder kurzen Trockengang (30 MIN) mit feuchten Tüchern durchführen.
Programmübersicht max. Füllmenge (Trockengewicht) RESTFEUCHTE KNITTERSCHUTZ +. SIGNAL Zusatzfunktionen EXTRATROCKEN 6kg • • • Durchtrocknen von dicken oder mehrlagigen Textilien, z. B. Frotteewäsche, Bademäntel. mn STARKTROCKEN 6kg • • • Durchtrocknen von dicken Textilien, z. B. Frotteewäsche, Frotteehandtücher. mn mn MISCHGEWEBE BAUMWOLLE Programme 10 Anwendung/Eigenschaften Pflegesymbole SCHRANKTROCKEN 6kg • • • Durchtrocknen von Textilien gleichmäßiger Dicke, z. B.
max. Füllmenge (Trockengewicht) RESTFEUCHTE KNITTERSCHUTZ + SIGNAL Zusatzfunktionen 30 MIN 1kg - • • Zum Nachtrocknen von einzelnen Wäschestücken oder für kleine Mengen unter 1kg. ml n 6kg • • • Spezialprogramm für Freizeitkleidung, wie Jeans, Sweat-Shirts, etc., mit unterschiedlichen Materialstärken (z. B. an Bündchen und Nähten). mn FREIZEIT ml n • Spezialprogramm mit Anti-Knittermechanik für pflegeleichte Textilien wie Oberhemden und Blusen; für minimalen Bügelaufwand.
Trocknen Gerät einschalten/Beleuchtung einschalten Den Programmwähler auf ein beliebiges Programm oder auf BELEUCHTUNG drehen. Das Gerät ist eingeschaltet. Bei geöffneter Einfülltür ist die Trommel beleuchtet. Einfülltür öffnen/Wäsche einfüllen 1. Einfülltür öffnen: Dazu kräftig gegen die Einfülltür drücken (Druckpunkt 2. Wäsche locker einfüllen. 1 ) Achtung! Keine Wäsche zwischen Einfülltür und Gummidichtung einklemmen. 3. Einfülltür fest zudrücken. Schloss muss hörbar einrasten.
Zusatzfunktionen wählen RESTFEUCHTE Zur Feineinstellung des Restfeuchtegehalts der Wäsche können zu den meisten Programmen zusätzlich die Trockenstufen +, ++ oder +++ hinzugewählt werden. Von + zu +++ wird die Wäsche trockener. 1. Die Taste RESTFEUCHTE so oft drücken, bis das Lämpchen der gewünschten Trockenstufe leuchtet. In den Programmen WOLLE oder SEIDE kann bei Bedarf durch erneutes Starten der Programme mit zusätzlich eingestellter Restfeuchtestufe +, ++ oder +++ auch nachgetrocknet werden.
Zeitvorwahl einstellen 3 3 3 Mit der Taste ZEITVORWAHL können Sie den Start eines Programms um 30 Minuten (30') bis max. 23 Stunden (23h) aufschieben. 1. Programm wählen. 2. Taste ZEITVORWAHL so oft drücken, bis der gewünschte Startaufschub im Multidisplay erscheint, z. B. 12h, wenn das Programm in 12 Stunden starten soll. Die Anzeige ZEITVORWAHL leuchtet. Wird 23h angezeigt und Sie drücken ein weiteres Mal, ist die Zeitvorwahl wieder aufgehoben.
Wäsche nachlegen oder vorzeitig entnehmen 1. Einfülltür öffnen. 1 Warnung! Wäsche und Trommel können heiß sein. Verbrennungsgefahr! 2. Wäsche nachlegen oder herausnehmen. 3. Einfülltür fest zudrücken. Schloss muss hörbar einrasten. 4. Taste START/PAUSE drücken, um den Trockengang fortzusetzen. Trockengang beendet/Wäsche entnehmen 3 Nachdem der Trockengang beendet ist, leuchten die Anzeigen ENDE und KNITTERSCHUTZ. Wurde die Taste SIGNAL gedrückt, ertönt in Abständen ein akustisches Signal.
Reinigung und Wartung Flusensiebe reinigen 1 Um einen einwandfreien Betrieb des Trockners zu gewährleisten, müssen die Flusensiebe (Microfeinfilter und Feinsieb) nach jedem Trockengang gereinigt werden. Achtung! Den Trockner nie ohne Flusensiebe oder mit beschädigten oder verstopften Flusensieben betreiben. 1. Einfülltür öffnen 2. Den Microfeinfilter, der im unteren Bereich der Einfüllöffnung eingelassen ist, mit angefeuchteter Hand reinigen. 3. Entriegelungstaste am Grobsieb nach unten drücken.
3 Gesamten Siebbereich reinigen Der Siebbereich braucht nicht nach jedem Trockengang gereinigt zu werden, sollte aber regelmäßig kontrolliert und gegebenenfalls von Flusen gereinigt werden. 6. Dazu Grobsieb oben anfassen und nach vorn ziehen, bis es sich aus den beiden Halterungen löst. 7. Flusen aus dem gesamten Siebbereich entfernen – am besten mit dem Staubsauger. 8. Beide Zapfen des Grobsiebes in die Halterungen an der Einfülltür drücken, bis sie einrasten. 9. Das Feinsieb wieder einsetzen. 10.
1. Schublade mit Kondensatbehälter ganz herausnehmen (1) und den Auslaufstutzen des Kondensatbehälters bis zum Anschlag hochziehen (2). 3 2. Kondensat in ein Becken oder dergleichen ausgießen. 3. Auslaufstutzen einschieben und Kondensatbehälter wieder einsetzen. Falls das Programm wegen vollem Kondensatbehälter unterbrochen wurde: Taste START/PAUSE drücken, um den Trockengang fortzusetzen. 3 Der Kondensatbehälter fasst ca.
1. Einfülltür öffnen. 2. Sockeltür öffnen: Dazu Entriegelungstaste an der Unterseite der Einfüllöffnung drücken und Sockeltür nach links aufklappen. 3. Filtergehäuse am Griff aus dem Sockel herausziehen. 4. Türinnenseite, Filtervorraum und Gummi-Dichtungen von Flusen reinigen. 5. Flusen vom Flusensieb am Sockelboden mit angefeuchteter Hand entfernen. 6. Zum Reinigen der Filtermatte: Filtermatte aus dem Filtergehäuse entnehmen.
8. Filtermatte in Rahmen einlegen und anschließend mit Rahmen ins Filtergehäuse einsetzen. 1 Achtung! Die Filtermatte muß mit dem Rahmen dicht abschließen. Insbesondere nach Einschieben ins Filtergehäuse den dichten Sitz der Matte am Rahmen prüfen! 9. Nach Bedarf ca. einmal pro Jahr mit dem beiliegenden Schwamm die Flusen vom Wärmetauscher entfernen. Benutzen Sie dazu bitte Haushaltshandschuhe. Tipp: Die Flusen lassen sich leichter entfernen, wenn sie zuvor z. B.
Bedienblende und Gehäuse reinigen 1 Achtung! Keine Möbelpflegemittel oder aggressive Reinigungsmittel zur Reinigung des Gerätes benutzen. Bedienblende und Gehäuse mit einem feuchten Tuch abwischen. Was tun, wenn... Kleine Störungen selbst beheben Falls während des Betriebs ein Fehlercode (E und Zahl oder Buchstabe) im Multidisplay angezeigt wird: Gerät aus- und wieder einschalten. Programm neu einstellen. Taste START/PAUSE drücken.
Problem Mögliche Ursache Abhilfe Beim nächsten Trocknen andeFalsches Programm gewählt. res Programm wählen (siehe Kapitel „Programmübersicht“). Trockenergebnis nicht zufriedenstellend. Flusensiebe verstopft. Flusensiebe reinigen. Flusenfilter verflust. Flusenfilter reinigen. Falsche Füllmenge. Empfohlene Füllmenge beachten. Lüftungsschlitze im Sockelbereich verdeckt. Lüftungsschlitze im Sockelbereich freimachen. Belag an Trommelinnenflä- Trommelinnefläche und Tromche oder an Trommelrippen.
Problem Trockengang dauert ungewöhnlich lang. Hinweis: Nach bis zu 5 Stunden endet der Trockengang automatisch (siehe „Trockengang beendet“). Mögliche Ursache Abhilfe Flusensiebe verstopft. Flusensiebe reinigen. Flusenfilter verflust. Flusenfilter reinigen. Füllmenge zu groß. Füllmenge reduzieren. Wäsche nicht ausreichend vorentwässert. Wäsche ausreichend vorentwässern. Besonders hohe Raumtemperatur. Zeitweilige Abschaltung des Kompressors als Überlastungsschutz.
Programmiermöglichkeiten Ziel Akustisches Signal, das an das Programmende erinnert, fest einprogrammieren. Durchführung 1. Programmwähler auf beliebiges Programm drehen. 2. Taste SIGNAL ca. 5 Sekunden gedrückt halten. Kurzes Signal ertönt mehrmals. Anzeige SIGNAL blinkt mehrmals. Damit ist die Einstellung fest einprogrammiert. Einstellung aufheben erfolgt wie unter 1. und 2. 1. Programmwähler auf beliebiges Programm drehen. 2. Die beiden Tasten SEIDE und SIGNAL gleichzeitig ca.
Technische Daten 5 Dieses Gerät entspricht den folgenden EG-Richtlinien: – 73/23/EWG vom 19.02.1973 Niederspannungs-Richtlinie – 89/336/EWG vom 03.05.1989 EMV-Richtlinie einschließlich Änderungs-Richtlinie 92/31/EWG – 93/68/EWG vom 22.07.1993 CE-Kennzeichnungs-Richtlinie Höhe x Breite x Tiefe 85 x 60 x 60 cm Tiefe bei geöffneter Einfülltür 109 cm Höhenverstellbarkeit 1,5 cm Leergewicht ca. 60kg Füllmenge (programmabhängig) 1) max. 6kg Energieverbrauch nach IEC 1121 s. e.
Aufstell- und Anschlussanweisung 1 Sicherheitshinweise für die Installation • Vor Inbetriebnahme müssen alle Teile der Transportsicherung entfernt sein. Andernfalls kann das Gerät beschädigt werden. • Vergewissern Sie sich vor Inbetriebnahme, dass die auf dem Typschild des Geräts angegebene Nennspannung und Stromart mit Netzspannung und Stromart am Aufstellort übereinstimmen. Die erforderliche elektrische Absicherung ist ebenfalls dem Typschild zu entnehmen.
Transportsicherung entfernen 1 Achtung! Vor Inbetriebnahme unbedingt alle Teile der Transportsicherung entfernen! 1. Einfülltür öffnen. 2. Klebestreifen innen an der Trommeloberseite abziehen. 3. Folienschlauch mit dem Polystyrolpolster aus dem Gerät ziehen. 1 Wenn das Gerät nicht aufrecht transportiert wurde, lassen Sie es vor Anschluss an das Netz und vor der ersten Inbetriebnahme 12 Stunden stehen, damit das Öl zum Kompressor zurückfließen kann. Andernfalls könnte der Kompressor beschädigt werden.
Türanschlag wechseln 1 Warnung! Der Wechsel des Türanschlags darf nur von einem Fachmann ausgeführt werden. Wenden Sie sich bei Bedarf an unseren Kundendienst oder an Ihren Fachhändler. Warnung! Vor Wechsel des Türanschlags Netzstecker ziehen; bei Festanschluss: Sicherung ganz herausdrehen bzw. ausschalten. 1. Einfülltür öffnen. 2. Scharnier A von der Gerätevorderwand abschrauben und Einfülltür abnehmen. 3. Abdeckplatten B und C abnehmen.
7. Abdeckplatten E von der Gerätevorderwand abschrauben, um 180° drehen und auf der gegenüberliegenden Seite anschrauben. 8. Türverriegelung F losschrauben, etwas nach unten drücken und aus der Gerätevorderwand herausnehmen. 9. Den Rastknopf von Abdeckung G unten eindrücken, Abdeckung etwas nach unten drücken und aus Gerätevorderwand herausnehmen. 10. Türverriegelung F auf die gegenüberliegende Seite umsetzen und festschrauben. 11.
Sonderzubehör Über den Ersatzteil-Service (Tel. 0180 / 322 66 22) oder Ihren Fachhändler ist folgendes Sonderzubehör erhältlich: Zwischenbausätze Wasch-/Trockensäule Mit diesen Zwischenbausätzen kann der Trockner zusammen mit einem AEG-Electrolux-Waschautomaten (60cm breit, Frontbeladung) zu einer platzsparenden Wasch-/Trockensäule angeordnet werden. Der Waschautomat steht unten, der Trockner oben. Folgende Ausführung ist lieferbar: – mit ausziehbarer Ablageplatte 916.
Garantiebedingungen/Kundendienststellen Deutschland Der Endabnehmer dieses Gerätes (Verbraucher) hat bei einem Kauf dieses Gerätes von einem Unternehmer (Händler) in Deutschland im Rahmen der Vorschriften über den Verbrauchsgüterkauf gesetzliche Rechte, die durch diese Garantie nicht eingeschränkt werden. Diese Garantie räumt dem Verbraucher also zusätzliche Rechte ein.
Österreich Sehr geehrter Kunde! Wir, die Electrolux Hausgeräte GmbH, beglückwünschen Sie zum Erwerb eines Gerätes aus dem Electrolux Konzern. Für dieses Gerät räumen wir Ihnen, als Verbraucher im Sinne des Konsumentenschutzgesetzes gemäß den nachstehenden Bedingungen, eine besondere Garantie ein, die Ihnen zusätzliche Rechte gewährt. 1. Die Garantie beginnt mit dem Tag an dem das Gerät gekauft wurde und erstreckt sich über einen Zeitraum von 24 Monaten.
Luxembourg 1. Unbeschadet etwaiger Ansprüche gegen Dritte wird dieses Gerät von unserem Kundendienst gemäß den folgenden Garantiebedingungen instandgesetzt, wenn es trotz sachgemäßer Behandlung und Beachtung der gültigen Einbauvorschriften, Betriebsanleitungen und vorschriftsmäßigem Anschluß infolge eines Fertigungs- oder Materialfehlers versagen sollte. 2.
Kundendienststelle Steiermark, südliches Burgenland A. Hell - Hausgeräteservice 8020 Graz, Asperngasse 2 Tel. 0316/572615 Fax 0316/572615-30 Internet: office@a-hell.at Kundendienststelle Salzburg Hausgeräte Kundendienst Wörndl Elektro Ges.m.b.H & CO KEG 5020 Salzburg, Gnigler Straße 18 Tel. Fax Internet: woerndl-kundendienst@aon.at Kundendienststelle Kärnten, Osttirol Elektroservice H. Schneider 9020 Klagenfurt, Rosentalerstraße 189 Tel. Fax Internet: elektroservice.schneider@aon.
Service Wenn Sie einmal unsere Hilfe benötigen, erreichen Sie uns in Deutschland wie folgt: Bei Fragen zu Bedienung oder Ausstattung Ihres Gerätes Wenden Sie sich an den AEG-Direct Info Service: Telefon: 0180 555 4 555 (0,12 Euro/Min)** Internet: www.aeg-electrolux.de E-Mail: aeg-hausgeraete.kundenservice@aeg-hausgeraete.de Bei technischen Störungen Prüfen Sie bitte zunächst, ob Sie mit Hilfe der Gebrauchsanweisung (Kapitel „Was tun, wenn...“) das Problem selbst beheben können.
From the Electrolux Group. The world´s No.1 choice. Die Electrolux-Gruppe ist der weltweit größte Hersteller von gas- und strombetriebenen Geräten für die Küche, zum Reinigen und für Forst und Garten. Jedes Jahr verkauft die Electrolux-Gruppe in über 150 Ländern der Erde über 55 Millionen Produkte (Kühlschränke, Herde, Waschmaschinen, Staubsauger, Motorsägen und Rasenmäher) mit einem Wert von rund 14 Mrd. USD. AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http://www.aeg-electrolux.