User manual

46
When small frost and ice occurs scrape off and remove frost and ice coating
with the supplied plastic scraper.
When ice coating is so thick that it cannot be removed with the plastic
scraper, the cooling gill have to be defrosted. Frequency of defrosting depends
on usage (generally 2-3 times a year).
Take the frozen foods out of the appliance, and put them into a basket lined
with paper or cloth. Store them in a possibly cool place or replace them into
another refrigerator.
Pull out the mains plug from the mains socket, so both parts of the appliance
are out of operation.
Open the doors of both parts of the appliance and clean the refrigerator
according to "Regular cleaning".
Maintain and clean the freezer as follows:
In order to lead the thaw water out remove the spout found at the middle
bottom of the appliance, turn and replace it according to the Fig. Put a prop-
er high bowl under the spout.
After the defrosting place the spout into its original position.
The bowl in figure is not a piece of accessories to the appliance!
Wipe the surfaces after defrosting and
leading the water out.
Put the mains plug into the mains
socket and put foods taken out back to
their places.
It is recommended to operate the
appliance at the highest position of the
thermostatic control for some hours so
that it can reach the sufficient storing
temperature as soon as possible.