S52300DSW0 DA KØLE-FRYSESKAB BRUGSANVISNING
FOR PERFEKTE RESULTATER Tak fordi du valgte dette produkt fra AEG. Vi har skabt det, så du kan nyde en ulastelig funktionsevne i mange år med nyskabende teknologi, der gør livet lettere – funktioner, som du ikke finder i almindelige apparater. Brug et par minutter på at læse mere – så du kan få det bedste ud af det. TILBEHØR OG FORBRUGSVARER I AEG's webbutik kan du finde alt, hvad du har brug for, til at holde alle dine AEG-apparater flotte og perfekt fungerende.
Indhold 3 INDHOLD 4 6 7 7 8 10 12 14 14 20 Om sikkerhed Betjening Ibrugtagning Daglig brug Nyttige oplysninger og råd Vedligeholdelse og rengøring Hvis noget går galt Tekniske data Installation Skån miljøet Der er anvendt følgende symboler i denne brugervejledning: Vigtige oplysninger om din egen sikkerhed, samt oplysninger om, hvordan du undgår skader på apparatet.
Om sikkerhed OM SIKKERHED Læs denne brugsanvisning igennem (inkl. tips og advarsler), før apparatet installeres og tages i brug. Det forebygger ulykker og sikrer, at apparatet bruges korrekt. For at undgå unødvendige fejl og uheld er det vigtigt at sikre, at alle, der bruger apparatet, er fuldt fortrolige med dets drift og sikkerhedsfunktioner.
Om sikkerhed 5 • Det er farligt at ændre apparatets specifikationer eller forsøge at ombygge det på nogen måde. Enhver skade på ledningen kan give kortslutning, brand og/eller elektrisk stød. ADVARSEL Enhver elektrisk komponent (netledning, stik, kompressor) skal udskiftes af et autoriseret serviceværksted eller en autoriseret montør for at undgå fare. • • • • 1. Netledningen må ikke forlænges. 2. Pas på, at stikket ikke bliver klemt eller beskadiget af apparatets bagpanel.
Betjening Installation Ved tilslutning til lysnet skal vejledningen i de pågældende afsnit nøje følges. • Pak apparatet ud, og efterse det for skader. Tilslut ikke apparatet, hvis det er beskadiget. Eventuelle skader på apparatet skal straks anmeldes til det sted, hvor det er købt. Gem i så fald emballagen. • Det anbefales at vente mindst to timer med at tilslutte apparatet, så olien har tid til at løbe tilbage i kompressoren. • Der skal være tilstrækkelig luftudskiftning rundt om apparatet.
Ibrugtagning 7 • Drej termostatknappen mod lavere indstillinger for at vælge minimum køling. • Drej termostatknappen mod højere indstillinger for at vælge maksimal køling. I reglen er en mellemindstilling mest passende. Når den præcise indstilling vælges, skal man dog huske på, at temperaturen i apparatet afhænger af: • Rumtemperaturen • Hvor tit døren åbnes • Mængden af mad • Skabets placering.
Nyttige oplysninger og råd Optøning Når dybfrostvarer eller nedfrosne madvarer skal bruges, kan de optøs i køleafdelingen eller ved stuetemperatur, afhængig af hvornår de skal bruges. Små stykker kan endda tilberedes uden optøning, direkte fra fryseren: I så fald forlænges tilberedningstiden. Flytbare hylder Køleskabets vægge har en række skinner, så hylderne kan placeres efter ønske.
Nyttige oplysninger og råd 9 • Varmeudvidelsen kan give pludselige knæklyde. Det er et naturligt og ufarligt fysisk fænomen. Det er normalt. • Når kompressoren tænder og slukker kan der høres et svagt klik fra termostatknappen. Det er normalt. Energisparetips • Åbn døren så lidt som muligt, og lad den ikke stå åben længere end højst nødvendigt.
Vedligeholdelse og rengøring • Det er en god idé at mærke alle pakker med indfrysningsdato, så du har styr på holdbarheden. Tips om opbevaring af frostvarer For at få den største fornøjelse af dette skab, skal du: • Sikre dig, at købte dybfrostvarer har været været korrekt opbevaret i forretningen; • Sørge for at bringe frostvarer hjem hurtigst muligt og lægge dem i fryseren; • Åbne døren så lidt som muligt, og ikke lade den stå åben længere end højst nødvendigt.
Vedligeholdelse og rengøring 11 Afløbet til afrimningsvand sidder midt i renden i køleafdelingen. Det skal jævnlig renses, så vandet ikke løber over og drypper ned på maden i skabet. Brug den medfølgende special-flaskerenser, der sidder i afløbshullet ved leveringen. Afrimning af fryser Der vil altid dannes lidt rim på hylderne i frostrummet og rundt om øverste afdeling. Fryseren skal afrimes, når laget af rim er 3-5 mm tykt. Rimlag fjernes på følgende måde: 1. Sluk for apparatet. 2.
Hvis noget går galt Hvis der skal være tændt for skabet: Bed nogen se til det en gang imellem, så maden ikke bliver fordærvet, hvis der har været strømsvigt. HVIS NOGET GÅR GALT ADVARSEL Inden fejlfinding skal stikket tages ud af kontakten. Fejl, der ikke er nævnt i denne brugsanvisning, må kun afhjælpes af en autoriseret installatør eller anden fagmand. Der kommer lyde under normal drift (kompressor, kølekredsløb).
Hvis noget går galt Fejl 13 Mulig årsag Løsning Der løber vand ud af skabet. Afrimningsvandet løber ikke fra afløbet og ned i beholderen oven over kompressoren. Sæt afløbet til afrimningsvand på fordamperbeholderen. Temperaturen i apparatet er for lav. Temperaturen er ikke rigtigt ind- Vælg en højere temperatur. stillet. Temperaturen i apparatet er for høj. Temperaturen er ikke rigtigt ind- Vælg en lavere temperatur. stillet. Døren er ikke lukket korrekt. Se "Lukning af døren".
Tekniske data TEKNISKE DATA Mål Højde 1404 mm Bredde 545 mm Dybde 604 mm Temperaturstigningstid 19 h Spænding 230V Frekvens 50 Hz De tekniske specifikationer fremgår af typeskiltet indvendig i apparatet, på venstre væg, samt af energimærket. INSTALLATION ADVARSEL Læs afsnittet "Om sikkerhed" omhyggeligt, før apparatet installeres for at forebygge ulykker, og sikre at det bruges korrekt.
Installation 15 1. Sæt afstandsstykkerne ind i hullerne. Se efter, at pilen (A) vender som vist på tegningen. 2. Drej afstandsstykkerne 45° mod uret, til de låses fast. A 45˚ Nivellering Ved opstillingen skal det sikres, at apparatet er i vater. Det gøres med to justeringsfødder i bunden, under apparatets forkant.
Installation 15mm 15mm Apparatet skal opstilles i god afstand fra varmekilder som radiatorer, varmtvandsbeholdere, direkte sollys etc. Sørg for, at luften kan cirkulere frit bag kabinettet. Afstanden mellem kabinettets øverste del og overskabet skal være mindst 100 mm for at sikre optimal ydelse, hvis apparatet anbringes under et overskab. Ideelt bør apparatet dog ikke placeres under overskabe. Apparatet kan sættes præcis i vater med en eller flere af de justerbare fødder i bunden af skabet.
Installation 3. 17 Tag dørene af ved at trække lidt op i dem, og fjern hængslet. 2 3 1 4.
Installation 5. Skru de to justeringsfødder af, samt skruerne i nederste dørhængsel. Fjern nederste dørhængsel, og montér det i den modsatte side. 6. Skru den yderste skrue i bunden ud, og skru den i på den modsatte side 7. Skru øverste hængseltap til døren ud.
Installation 8. Skru tappen i på den modsatte side. 9. Sæt dørene på tappene, og montér dørene. Montér hængslet. 19 2 3 1 10. Sæt blindpropperne i hullerne på den modsatte side (ligger i posen med tilbehør). 11. Stram dørhængslet. Kontroller, at dørene flugter. 12. Afmonter grebet, og flyt til modsatte side det 5) i modsatte side. 13. Sæt apparatet på plads, bring det i vater, og vent mindst fire timer med at tilslutte det til lysnettet.
Skån miljøet Undertiden slutter pakningen ikke perfekt til kabinettet, hvis omgivelserne er kolde (dvs. om vinteren). Hvis dette er tilfældet, skal du lade pakningen tilpasse sig selv. Kontakt Electrolux A/S, hvis du ikke selv vil vende døren. Electrolux A/S kan tilbyde at ændre dørens åbningsretning mod betaling. Elektrisk tilslutning Inden tilslutning til lysnettet skal det kontrolleres, at spændingen og frekvensen på typeskiltet svarer til boligens forsyningsstrøm. Apparatet skal tilsluttes jord.
www.aeg.