User Guide

18
Bruit dû à la circulation du fluide frigorigène.
Bruit dû à la mise en place du meuble
Sources de bruit possibles faciles à éliminer
La mise à niveau de l’appareil n’est pas correcte:
Agissez sur les pieds
L’appareil est accolé à d’autres meubles:
Espacez les meubles.
Les accessoires intérieurs sont mal installés:
Retirez les clayettes et/ou les balconnets et remettez-les correctement en
place.
Les bouteilles et/ou les boîtes se touchent:
Séparez les différents éléments à l’intérieur de l’appareil.
Tic
Tic
Blubb
Blubb
47
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambi‡‡ent temperature. The appliance should
therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corresponds to
the climate classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is located
at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each
climate classification: each climate classification:
Climate classification for an ambient temperature of
SN +10 bis +32 °C
N +16 bis +32 °C
ST +18 bis +38 °C
T +18 bis +43 °C
If installation next to a source of heat is unavoidable, the following mini-
mum clearances must be maintained at the sides of the appliance:
– for electric cookers 3 cm;
– for oil and coal fired ranges 30 cm.
If these clearances cannot be maintained a heat insulating pad is required
between the cooker and the refrigeration appliance.
If the refrigeration appliance is installed next to another refrigerator or free-
zer a clearance of 5 cm at the sides is required, in order to prevent the for-
mation of condensation on the outside of the appliance.