User manual

28
Rehingeing the door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains before
hand.
Procced as follow:
1. Remove the ventilationgrill (D) and
the plastic cover (G).
2. Remove plug (F) and refit it on the
opposite side of the
ventilationgrill.
3. Unscrew the bottom hinge and
remove the freezer compartment
door by pulling it downwards.
E
F
D
F
F
F
Your appliance needs air
For safety reasons, minimum
ventilationmust be as shown Fig.
Attention: keep ventilation
openings clear of obstruction.
NP00
100 mm10 mm
10 mm
Rear spacers
Fit the rear spacers contained in
the appliance to ensure even
dissipation of heat genereted
during operation.
Proceed in the sequence
illustrated by the figures.