User manual

29
H
4. Re-tighten the screws.
5. Remove the screw masking plugs
from the bottom left-hand side and
refit them on the right-hand side.
6. Unscrew the two screws on the
bottom left-hand side.
7. Unscrew the middle hinge and
remove the refrigerator
compartment door by pulling it
downwards.
8. With a screwdriver, unscrew the two
masking plugs covering the holes on
the left-hand side and refit them on
the right-hand side.
9. Unscrew the pin from the top hinge
and refit it on the left-hand side.
Remember to fit the washers.
10. Slide the refrigerator compartment
door onto the top pin.
11. Insert the middle hinge into the
bottom of the refrigerator
compartment door. Remember to fit
the washers.
12. Fully screw up the middle hinge.
13. Fit the freezer compartment door
into the middle hinge.
14. Unscrew the bottom hinge pin and
refit it on the opposite side of the
bottom hinge.
15. Insert the bottom hinge into the
bottom of the freezer compartment
door.
16. Fully screw down the bottom hinge.
17. Re-assemble the ventilationgrill (D)
and the plastic cover (C).
18. Unscrew the handles. Refit them on the opposite side after having piercing
the plugs with a punch. Cover the holes left open with the plugs contained
in the documentation pack.
G
D162/a