User manual

28
left side of the freezer door.
- Opening the doors, fix the
middle hinge on the left side with
two screws. Do not forget the
plastic spacer that must be
placed under the middle hinge
(H).
Unscrew the top handle bracket
from the handle rod (1). Unscrew
the bottom handle bracket from
the door (2).
Unscrew the top handle bracket
from the door (3) and screw onto
the bottom right-hand side of
the door (4).
Turn the handle bracket with the
handle rod 180° and screw them
to the door (5) and the fitted
handle bracket (6).
Move the small plug from right to
left. Reposition, level the
appliance, wait for at least one
hour and then connect it to the
mains socket.
Pay attention that the border of
the doors are parallel to the top
border.
Reposition, level the appliance
and connect it to the mains
socket..
In any case you do not want to
carry out the above mentioned
operations, contact the nearest
After Sales Service Force.. The
After Sales Service specialist
will carry out the reversibility
of the doors at your cost.
Attention:
After having reversed the opening direction of the doors check that all the
screws are properly tightened and that the magnetic seal adheres to the
cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may
not fit perfectly to the cabinet. in that case, wait for the natural fitting of
the gasket or accelerate this process by heating up the part involved with a
normal hairdrier.