User manual

This appliance complies with the E.E.C. Directives.

Rear spacers

Inside the appliance you find two spacers

which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the

screw head, then retighten the screws.

Installation of the Taste Guard Filter

The Taste Guard Filter is an active carbon filter which absorbs bad odours and permits to

maintain the best flavour and aroma for all foodstuffs without risk of odour cross con-

tamination.

On delivery the carbon filter is in a plastic bag to maintain it’s duration and characteristics.

The filter should be placed behind the flap before the appliance is turned on.

1. Pull the flap outwards (1)

2. Remove the filter from the plastic bag

3. Insert the filter in the slot found in the

back of the flap cover (2)

4. Close the flap cover

During operation, always keep the air venti-

lation flap closed.

The filter should be handled carefully so frag-

ments do not loosen from the surface.

Fitting the door handles

The handles are supplied as a kit at delivery.

Installation