S60360KG1 S80360KG S80400KG User manual Notice d'utilisation Fridge Freezer Réfrigérateur/ congélateur
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Safety information 3 tions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission.
Safety information • • • • 2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover1) of interior lighting. This appliance is heavy.
Control panel 5 • Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve sufficient ventilation follow the instructions relevant to installation. • Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, condenser) to prevent possible burn. • The appliance must not be located close to radiators or cookers. • Make sure that the mains plug is accessible after the installation of the appliance.
Control panel 12 13 14 15 Freezer temperature indicator Freezer temperature regulator, - button Alarm reset button Alarm indicator Switching on 1. Insert the plug into the mains socket. 2. Set ON/OFF switch to ON. 3. The alarm indicator light flashes since the temperature is reached. The acoustic alarm sounds. 4. Press the alarm reset button to reset the alarm. Switching off To switch the entire appliance off: 1. Set ON/OFF switch to OFF. 2. Disconnect the mains plug from the mains socket.
First use 7 1. press continuously the temperature regulator (+ button) until the letter "H" (Holiday) appears on the temperature indicator. The Holiday function sets the temperature approx +15°C. The refrigerator is in the energy-saving mode. To deactivate the function: 1. set the required temperature by pressing the fridge temperature regulator.
Daily use In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then refrozen (after cooling). Thawing Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.
Daily use MAXIBOX drawer The drawer is suitable for storing fruit and vegetables. There is a separator inside the drawer that can be placed in different positions to allow for the subdivision best suited to personal needs. There is a grille (if foreseen) on the bottom of the drawer to separate the fruit and vegetables from any humidity that may form on the bottom surface.
Helpful hints and tips Removal of freezing baskets from the freezer The freezing baskets have a limit stop to prevent their accidental removal or falling out. At the time of its removal from the freezer, pull the basket towards yourself and, upon reaching the end point, remove the basket by tilting its front upwards. At the time of putting it back, slightly lift the front of the basket to insert it into the freezer. Once you are over the end points, push the baskets back in their position.
Care and cleaning 11 Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
Care and cleaning • regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush.
What to do if… 13 • put insulating material around the drawers, e.g. blankets or newspapers. Defrosting can be accelerated by placing bowls with hot water (not boiling) inside the freezer. • Loosen the drainage channel from its resting position, push it in according to the illustration and place it in the bottom freezer drawer where water can collect • carefully scrape off the ice when it starts to thaw.
What to do if… Problem Possible cause Solution The FROSTMATIC function is switched on. Refer to "FROSTMATIC function". The COOLMATIC function is switched on. Refer to "COOLMATIC function". Water flows on the rear plate of the refrigerator. During the automatic defrosting process, frost defrosts on the rear plate. This is correct. Water flows into the refrigerator. The water outlet is clogged. Clean the water outlet. Products prevent that water flows into the water collector.
Technical data 15 Replacing the lamp 1. Disconnect the appliance. 2. Push the movable part to unhook the lamp cover (1). 3. Remove the lamp cover (2). 1 4. Replace the lamp with one of the same power and specifically designed for domestic appliances only. 5. Install the lamp cover. 6. Connect the appliance. 7. Open the door. Make sure that the lamp comes on. 2 Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3.
Installation Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C A B 20 mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
Installation Rear spacers You can find the two spacers in the bag with documentation. Do these steps to install the spacers: 1. Release the screw. 2. Engage the spacer below the screw. 3. Turn the spacer to the right position. 4. Tighten again the screws. 2 1 4 Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front.
Installation Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation. To remove them proceed as follows: 1. Move the shelf holders in the direction of the arrow (A). 2. Raise the shelf from the rear and push it forward until it is freed (B). 3. Remove the retainers (C). A B C Door reversibility WARNING! Before carrying out any operations, remove the plug from the power socket.
Installation 6. 7. Remove using a tool the cover (b1). Unscrew the lower hinge pivot (b2) and the spacer (b3) and place them on the opposite side. Re-insert the cover (b1) on the opposite side. b1 b2 b3 8. Remove the plugs (t1) on the upper side of both doors and move them to the other side. 9. Re-insert the lower door on the lower hinge pivot (b2). 10. Insert the middle hinge (m2) into the left drill of the lower door. 1 11. Unscrew the upper hinge pivot (t1) and place it on the opposite side. 12.
Environmental concerns In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the reversibility of the doors at your cost. ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
Sommaire 21 Nous vous remercions d’avoir choisi l’un de nos produits de qualité. Afin de garantir une performance optimale et constante de votre appareil, veuillez lire attentivement cette notice d'utilisation. Il vous permettra d’utiliser correctement et efficacement toutes les fonctions de l’appareil. Nous vous recommandons de conserver cette notice à proximité pour une utilisation rapide et optimale.
Consignes de sécurité CONSIGNES DE SÉCURITÉ Pour votre sécurité et garantir une utilisation correcte de l'appareil, lisez attentivement cette notice, y compris les conseils et avertissements, avant d'installer et d'utiliser l'appareil pour la première fois. Pour éviter toute erreur ou accident, veillez à ce que toute personne qui utilise l'appareil connaisse bien son fonctionnement et ses fonctions de sécurité. Conservez cette notice avec l'appareil.
Consignes de sécurité 23 Pendant le transport et l'installation de votre appareil, assurez-vous qu'aucune partie du circuit frigorifique n'est endommagée. Si le circuit frigorifique est endommagé : – évitez les flammes vives et toute autre source d'allumage – aérez soigneusement la pièce où se trouve l'appareil • Ne modifiez pas les spécifications de l'appareil. Si le câble d'alimentation est endommagé, il peut causer un court circuit, un incendie et/ou une électrocution.
Consignes de sécurité Entretien et nettoyage • Avant toute opération d'entretien, mettez l'appareil hors tension et débranchez-le de la prise de courant. • N'utilisez pas d'objets métalliques pour nettoyer l'appareil. • N'utilisez pas d'objet tranchant pour gratter la couche de givre. Utilisez une spatule en plastique. • Contrôlez régulièrement l'orifice d'évacuation de l'eau de dégivrage dans le compartiment réfrigérateur. Nettoyez-le, si besoin.
Bandeau de commande 25 BANDEAU DE COMMANDE 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Touche ON/OFF Dispositif de réglage de température du réfrigérateur, touche + Affichage de la température du compartiment réfrigérateur Dispositif de réglage de température du réfrigérateur, touche Touche COOLMATIC Voyant COOLMATIC Voyant du compartiment réfrigérateur Voyant du compartiment congélateur Voyant FROSTMATIC Touche FROSTMATIC Dispositif de réglage de température du
Bandeau de commande La température programmée sera atteinte en 24 heures. Des variations de quelques degrés par rapport à la température programmée sont normales et ne signifient pas un dysfonctionnement de l'appareil. Fonction COOLMATIC La fonction COOLMATIC permet un refroidissement rapide de grandes quantités d'aliments à conserver dans le compartiment réfrigérateur, après avoir fait de gros achats par exemple. Pour activer la fonction, procédez comme suit : 1. Appuyez sur la touche COOLMATIC. 2.
Première utilisation 27 Pour arrêter l'alarme sonore, appuyez sur la touche Arrêt alarme. Le voyant rouge alarme continue de clignoter. Une fois rétablies les conditions normales de fonctionnement, le signal sonore s'arrête alors que le voyant alarme continue de clignoter. Appuyez sur la touche Arrêt alarme. Le voyant Alarme s'éteint tandis que s'affiche pendant 5 secondes la température la plus élevée atteinte dans le compartiment congélateur.
Utilisation quotidienne Clayettes amovibles Les parois du réfrigérateur sont équipées d'une série de glissières pour que les clayettes puissent être placées en fonction des besoins. Porte-bouteilles Placez les bouteilles (ouverture vers l'avant) dans le compartiment prévu à cet effet. Si le compartiment est positionné dans le sens horizontal, n'y placer que des bouteilles fermées. Ce porte-bouteilles peut être incliné afin de pouvoir y ranger des bouteilles déjà ouvertes.
Conseils utiles 29 Emplacement des balconnets de la porte En fonction de la taille des paquets d'aliments conservés, les balconnets de la porte peuvent être positionnés à différentes hauteurs. Pour les ajuster, procédez comme suit : tirez progressivement dans le sens des flèches pour les dégager, puis repositionnez-les selon les besoins. Retrait des paniers de congélation du compartiment congélateur Les paniers de congélation sont équipés d'un arrêt afin d'empêcher leur retrait accidentel ou chute.
Conseils utiles Conseils pour l'économie d'énergie • N'ouvrez pas la porte trop souvent ou plus longtemps que nécessaire. • Si la température ambiante est élevée, le dispositif de réglage de température est sur la position de froid maximum et l'appareil est plein : il est possible que le compresseur fonctionne en régime continu, d'où un risque de formation excessive de givre sur l'évaporateur.
Entretien et nettoyage 31 • la température très basse à laquelle se trouvent les bâtonnets glacés, s'ils sont consommés dès leur sortie du compartiment congélateur, peut provoquer des brûlures. • L'identification des emballages est importante : indiquez la date de congélation du produit, et respectez la durée de conservation indiquée par le fabricant.
Entretien et nettoyage Dégivrage du réfrigérateur Le givre est automatiquement éliminé de l'évaporateur du compartiment réfrigérateur à chaque arrêt du compresseur, en cours d'utilisation normale. L'eau de dégivrage est collectée dans un récipient spécial situé à l'arrière de l'appareil, au-dessus du compresseur, d'où elle s'évapore.
En cas d'anomalie de fonctionnement 33 Il est recommandé de placer le thermostat de l'appareil sur la position Max pendant quelques heures pour que la température de stockage suffisante puisse être atteinte le plus rapidement possible. N'utilisez en aucun cas de couteau ou tout autre objet tranchant, d'objet métallique pour gratter la couche de givre, vous risquez de détériorer irrémédiablement l'évaporateur.
En cas d'anomalie de fonctionnement Problème Cause possible Solution Des denrées empêchent l'eau de s'écouler dans le réservoir d'eau. Assurez-vous que les produits ne touchent pas la plaque arrière. De l'eau coule sur le sol. L'eau de dégivrage ne s'écoule pas dans le plateau d'évaporation situé au-dessus du compresseur. Fixez le tuyau de sortie de l'eau au plateau d'évaporation. Il y a trop de givre et de glace. Les produits ne sont pas correctement emballés. Emballez mieux les produits.
Caractéristiques techniques 35 Remplacement de l'ampoule 1. Débranchez l'appareil. 2. Poussez sur la partie mobile pour décrocher le diffuseur de l'ampoule (1). 3. Enlevez le diffuseur (2). 1 4. Remplacez l'ampoule par une ampoule de même puissance spécifiquement conçue pour les appareils ménagers. 5. Installez le diffuseur. 6. Branchez l'appareil. 7. Ouvrez la porte. Vérifiez que l'ampoule s'allume. 2 Fermeture de la porte 1. Nettoyez les joints de la porte. 2. Si nécessaire, ajustez la porte.
Installation Classe climatique Température ambiante SN +10 à + 32 °C N +16 à + 32 °C ST +16 à + 38 °C T +16 à + 43 °C A B 20 mm L'appareil doit être installé à bonne distance de toute source de chaleur telle que les radiateurs, chauffe-eau, lumière directe du soleil etc. Assurez-vous que l'air circule librement à l'arrière de l'appareil.
Installation Entretoises arrière Vous trouverez les deux filtres dans le sac avec la documentation. Pour installer les filtres, procédez comme suit : 1. Desserrez la vis. 2. Insérez le filtre sous la vis. 3. Tournez le filtre dans la bonne position. 4. Resserrez les vis. 2 1 4 Mise à niveau Lors de la mise en place de l'appareil, assurez-vous qu'il soit positionné de façon plane. Servez-vous des deux pieds réglables se trouvant à l'avant de l'appareil.
Installation Retrait des supports de clayette Votre appareil est équipé de dispositifs de retenue qui permettent d'immobiliser les clayettes au cours du transport. Pour les enlever, procédez comme suit : 1. Déplacez les supports de clayette dans le sens de la flèche (A). 2. Soulevez la clayette de l'arrière et poussez-la vers l'avant pour la dégager (B). 3. Enlevez les dispositifs de retenue (C). A B C Réversibilité de la porte AVERTISSEMENT Avant toute opération, débranchez la prise de courant.
Installation 6. 7. Retirez le cache (b1) à l’aide d'un outil. Dévissez le gond de la charnière inférieure (b2) et l'entretoise (b3) et placezles du côté opposé. Réinsérez le cache (b1) du côté opposé. b1 b2 b3 8. Enlevez les caches (t1) situés sur l'arête supérieure des deux portes et placez-les sur le côté opposé. 9. Replacez la porte inférieure sur le gond de la charnière inférieure (b2). 10. Insérez la charnière centrale (m2) dans le trou gauche de la porte inférieure. 1 11.
En matière de sauvegarde de l'environnement Si la température ambiante est basse (en hiver, par exemple), il se peut que le joint n'adhère pas parfaitement. Dans ce cas, attendez que le joint reprenne sa taille naturelle. Si vous ne voulez pas effectuer personnellement les opérations décrites ci-dessus, contactez le service après-vente. Un technicien du service après-vente procédera à la réversibilité de la porte à vos frais.
210621874-A-052011 www.aeg.