S83200CMM0 S83600CMM0 EN FRIDGE FREEZER USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 11 12 16 18 19 21 21 24 Safety information Control panel First use Daily use Helpful hints and tips Care and cleaning What to do if… Technical data Installation Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information 5 • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock. WARNING! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel to avoid hazard. • • • • 1. Power cord must not be lengthened. 2. Make sure that the power plug is not squashed or damaged by the back of the appliance.
Safety information Installation For electrical connection carefully follow the instructions given in specific paragraphs. • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
Control panel 7 CONTROL PANEL 1 2 7 3 6 4 5 1 Fridge temperature colder button 2 Fridge temperature warmer button 3 ON/OFF button OK button 4 Freezer temperature warmer button 5 Display 6 Freezer temperature colder button 7 Mode button It is possible to change predefined sound of buttons to a loudly one by pressing together MODE 7 and MINUS 6 for some seconds. Change is reversible.
Control panel 8 FROSTMATIC function 9 COOLMATIC function 10 Child Lock function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the appliance ON/OFF button if the display is off. 3. The alarm buzzer could operate after few seconds. To reset the alarm refer to "High temperature alarm". 4. If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to "What to do if...". 5.
Control panel 9 Set default temperature: • +5°C for the fridge • -18°C for the freezer The temperature indicators show the set temperature. To restore the set default temperature switch off the appliance. The set temperature will be reached within 24 hours. Fluctuations of some degrees around set temperature are normal and does not mean any fault in the appliance. After a power failure the set temperature remains stored.
Control panel 1. Press the Mode button until the corresponding icon appears. The COOLMATIC indicator flashes. 2. Press the OK button to confirm. The COOLMATIC indicator is shown. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1. Press the Mode button until the COOLMATIC indicator flashes. 2. Press the OK button to confirm. 3. The COOLMATIC indicator goes off.
First use 11 The FROSTMATIC indicator is shown. This function stops automatically after 52 hours. To switch off the function before its automatic end: 1. Press the Mode button until the FROSTMATIC indicator flashes. 2. Press the OK button to confirm. 3. The FROSTMATIC indicator goes off. Place the fresh food to be frozen in the FROSTMATIC basket. The function switches off by selecting a different freezer set temperature.
Daily use DAILY USE Storage of frozen food When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours on the higher settings. In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer than the value shown in the technical characteristics chart under "rising time", the defrosted food must be consumed quickly or cooked immediately and then refrozen (after cooling).
Daily use Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Bottle rack Place the bottles (with the opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles. This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this result, pull the shelf up so it can rotate upwards and be placed on the next higher level.
Daily use Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. FreshBox drawer This device allows rapid cooling of foods and more uniform temperature in the drawer. To switch on the function: 1. Switch on the COOLMATIC function. 2. The COOLMATIC indicator comes on. 3.
Daily use ProFresh Mode If the compartment is not needed as FreshBox, the settings can be changed in order to have it just as a low temperature drawer. To switch on the function: 1. Slide upward the flap as shown in the figure. To switch off the function: 1. Slide down the flap. QuickChill of Drinks This function allows rapid cooling of drinks. To switch on the function: 1. Remove or place upward the FreshBox drawer and put the bottle rack in front of the QuickChill slots as shown in the figure. 2.
Helpful hints and tips MAXIBOX drawer The drawer is suitable for storing fruit and vegetables. There is a separator inside the drawer that can be placed in different positions to allow for the subdivision best suited to personal needs. There is a grille (if foreseen) on the bottom of the drawer to separate the fruit and vegetables from any humidity that may form on the bottom surface.
Helpful hints and tips 17 Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Care and cleaning Hints for storage of frozen food To obtain the best performance from this appliance, you should: • make sure that the commercially frozen foodstuffs were adequately stored by the retailer; • be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time; • not open the door frequently or leave it open longer than absolutely necessary. • Once defrosted, food deteriorates rapidly and cannot be refrozen.
What to do if… 19 It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type.
What to do if… Problem Possible cause Solution The room temperature is too high. Decrease the room temperature. The FROSTMATIC function is switched on. Refer to "FROSTMATIC function". The COOLMATIC function is switched on. Refer to "COOLMATIC function". Water flows on the rear plate of the refrigerator. During the automatic defrosting process, frost defrosts on the rear plate. This is correct. Water flows into the refrigerator. The water outlet is clogged. Clean the water outlet.
Technical data Problem "dEMo" appears on the display. Possible cause 21 Solution The appliance is in demonstration mode. Keep pressed approximately 10 sec the OK button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly. As much as the advice does not lead to result, call the nearest brand-mark service. Closing the door 1. Clean the door gaskets. 2. If necessary, adjust the door. Refer to "Installation". 3.
Installation Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C A B 20 mm The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
Installation Rear spacers You can find the two spacers in the bag with documentation. Do these steps to install the spacers: 1. Release the screw. 2. Engage the spacer below the screw. 3. Turn the spacer to the right position. 4. Tighten again the screws. 2 1 4 Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front.
Environmental concerns Removing the shelf holders Your appliance is equipped with shelf retainers that make it possible to secure the shelves during transportation. To remove them proceed as follows: 1. Move the shelf holders in the direction of the arrow (A). 2. Raise the shelf from the rear and push it forward until it is freed (B). 3. Remove the retainers (C).
for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
www.aeg.