S93880KMB0 S93880KMX0 EN REFRIGERATOR USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 6 10 11 12 14 15 17 20 20 26 28 Safety information Control panel Water dispenser First use Daily use Helpful hints and tips Care and cleaning What to do if… Technical data Installation Noises Environmental concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
Safety information 5 During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.
Control panel • Unpack the appliance and check if there are damages on it. Do not connect the appliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing. • It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor. • Adequate air circulation should be around the appliance, lacking this leads to overheating.
Control panel 7 Display/Indicator 1 2 3 4 8 7 6 5 1 2 3 4 5 6 7 8 Timer indicator COOLMATIC function Holiday function Temperature indicator Alarm indicator Child Lock function Minute Minder function Humidity function Switching on To switch on the appliance do these steps: 1. Connect the mains plug to the power socket. 2. Press the ON/OFF button if the display is off. 3. If "dEMo" appears on the display, the appliance is in demonstration mode. Refer to "What to do if..." paragraph. 4.
Control panel Minute Minder function The Minute Minder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain lenght of time. To switch on the function: 1. Press the Mode button until the corresponding icon appears. The Minute Minder indicator flashes. The Timer shows the set value (30 minutes) for a few seconds. 2.
Control panel 9 2. Press the OK button to confirm. The COOLMATIC indicator is shown. The COOLMATIC function shuts off automatically after approximately 6 hours. To switch off the function before its automatic end: 1. Press the Mode button until the COOLMATIC indicator flashes. 2. Press the OK button to confirm. 3. The COOLMATIC indicator goes off. The function switches off by selecting a different fridge set temperature.
Water dispenser Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by: • flashing Alarm indicator • acoustic buzzer When normal conditions are restored (door closed), the alarm will stop. During the alarm, the buzzer can be switched off by pressing any button.
First use 11 Selecting and dispensing water Before dispensing water, select either carbonated water (2) or plain water (3). The actual choice is indicated by the lit button. Water selection can be changed while the water is running. Water is dispensed by pressing a glass or other container towards the flap (6). Draw back the glass or container to stop the water flow. Any water that drips or is spilled is collected in the drip tray below the water dispenser.
Daily use Check that the drain hose at the rear of the cabinet discharges into the drip tray. DAILY USE Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Some shelves must be lifted up by the rear edge to enable them to be removed. Do not move the glass shelf above the vegetable drawer to ensure correct air circulation. Vegetable Drawer The drawer is suitable for storing fruit and vegetables.
Daily use 13 Bottle rack Place the bottles (with the opening facing front) in the pre-positioned shelf. If the shelf is positioned horizontally, place only closed bottles. This bottle holder shelf can be tilted in order to store previously opened bottles. To obtain this result, pull the shelf up so it can rotate upwards and be placed on the next higher level. Clean Air Control Filter Your appliance is equipped with a carbon filter behind the air lever flap.
Helpful hints and tips HELPFUL HINTS AND TIPS Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • If the ambient temperature is high and the Temperature Regulator is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Care and cleaning 15 If you want to check the temperature of food stored in the refrigerator, place a glass of water centrally in the cabinet, and put a proper thermometer with an accuracy of +/– 1 °C into it. After 6 hours the temperature can be monitored. The measuring shall be performed under steadystated conditions (without changing the load). CARE AND CLEANING CAUTION! Unplug the appliance before carrying out any maintenance operation.
Care and cleaning Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating. After cleaning, reconnect the equipment to the mains supply.
What to do if… 17 through a drain hole into a special container at the back of the appliance, over the motor compressor, where it evaporates. Periods of non-operation When the water system is not use for a long period, turn off the water connection to the refrigerator. • A filter that has been in service shall not be exposed to temperatures below 0°C as cracking of the filter body may occur due to freezing expansion.
What to do if… Problem Possible cause Solution upper or lower square is shown in the temperature display. An error has occurred in measuring the temperature Call your service representative (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible) dEMo appears on the display. The appliance is in demonstration mode (dEMo) . Keep pressed approximately 10 sec.
What to do if… Problem Possible cause 19 Solution The mains plug is not connected to the mains socket correctly. Connect the mains plug to the mains socket correctly. The appliance has no power. There is no voltage in the mains socket. Connect a another electrical appliance to the mains socket. Check fuse. Contact a qualified electrician. Not enough carbon dioxide in the water. The carbon dioxide is running out. Refer to "Installation of the gas cylinder". Too much carbon dioxide in the water.
Technical data Replacing the lamp The appliance is equipped with a longlife LED interior light. Only service is allowed to replace the lighting device. Contact your Service Center . Closing the door 1. 2. 3. Clean the door gaskets. If necessary, adjust the door. Refer to "Installation". If necessary, replace the defective door gaskets. Contact the Service Center.
Installation 21 Positioning Install this appliance at a location where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance: Climate class Ambient temperature SN +10°C to + 32°C N +16°C to + 32°C ST +16°C to + 38°C T +16°C to + 43°C Location To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm .
Installation 1. 2. 3. Open the door. Remove the transport support from the door sides. Remove the transport support from the lower hinge (some models). 3 2 4. 5. Remove the transport support from underneath the water unit. Cut the pump securing tie and remove it. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad. 5 4 Rear spacers Install the spacers provided within the accessory bag as shown in the figure.
Installation 23 This work is to be carried out by a skilled plumber. There are different type-approved taps and tap assemblies on the market. The water hose must not be cracked, squeezed or put in tight bends. Before the appliance is placed its final location, ensure that the water connection has been correctly carried out, that there is no leakage at the connection to the water tap. Tighten the screw enough by hand. Make sure that the gasket is properly positioned in the connector.
Installation 1. 2. Open the air lever flap. Take the filter out of the plastic bag. 3. Insert the filter in the slot found in the back of the air lever flap. Close the air lever flap. 4. The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function. Starting the water system for the first time. Ensure proper connection to the water supply, refer to "Connecting the water hose". 1.
Installation 1. 2. 3. 4. 5. 6. 7. 8. 9. Remove the accessories in front of the water module and open the service hatch. Place a cloth or a piece of kitchen towel in the space beneath the water filter. Pull the bypass cartridge outwards, grasping the lower part, until the water bypass cartridge is automatically ejected. Remove the protective wrapping of the new water filter and insert the new filter firmly into the filter connection. Push the water filter back to its original position.
Noises 2. Position the gas cylinder with the adapter attached underneath the valve and ensure that the hooks of the lever system supports the protruding parts of the adapter. 2 1 3. 4. 5. Then turn the lever upwards in one continuous movement. Unlock the water dispenser, refer to "Water dispenser functions". Choose carbonated water and dispense further 1,5 litres (2,5 pints) of water. The system is now ready for use.
Noises SSS RRR ! HISSS! OK BRRR! ! BB U BL CLICK! BRRR! BLUBB! ! ICK CL CR AC K! CLICK! BRRR! BLUBB!
Environmental concerns HISSS! SSSRRR! CRACK! HISSS! SSSRRR! CRACK! ENVIRONMENTAL CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
www.aeg.