SANTO Einbau-Kühlschränke Built-in - Refrigerators Gebrauchsanweisung Operating instructions
Dear customer, Before placing your new refrigerator/freezer into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. These operating instructions are for use with several technically comparable models with varying accessories. Please observe the notes which apply to your model.
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Appliance Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Disposal of old Appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Remove transport safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety The safety of our refrigerators/freezers is in accordance with recognised technological standards and appliance safety legislation. We nevertheless feel that it is important to acquaint you with the following safety guidelines: Intended use • The refrigerator is intended for use in the home. It is suitable for the cooling food. If the appliance is used for purposes other than those intended or used incorrectly, no liability can be accepted by the manufacturer for any damage that may be caused.
Safety catches, if fitted. By doing this you ensure that children cannot lock themselves in the appliance when playing (there is risk of suffocation!) or get themselves into other dangerous situations. • Often children cannot recognise the hazards present in household appliances. It is therefore important that you ensure adequate supervision and never let children play with the appliance! Daily Operation • Containers with flammable gases or liquids can leak at low temperatures.
Disposal Appliance Packaging Information All materials are environmentally sound! They can be disposed of or burned at an incinerating plant without danger. About the materials: The plastics can be recycled and are identified as follows: >PE< for polyethylene, e.g. the outer covering and the bags in the interior. >PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluorocarbon.
Remove transport packaging The appliance and the interior fittings are protected for transport. ☞1. Pull off the adhesive tape on the left and right side of the door. 2. Remove all adhesive tape and packing pieces from the interior of the appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use and efficient performance of the appliance is affected by the ambient temperature.
Installation It is necessary to avoid overheating of the appliance by maintaining adequate distances from heat sources and by the use of a suitable thermal insulation plate. Proper ventilation of the appliance must also be ensured. Your refrigerator needs ventilation Integratable models (i-appliances) The integrated door of the furniture cabinet largely seals the installation recess. iappliances must therefore be provided with ventilation by having an opening in the furniture plinth.
mains at the installation location. e.g.: AC 220 ... 240 V 50 Hz or 220 ... 240 V ~50 Hz (i.e. 220 to 240 volts alternating current, 50 Hertz) The rating plate is inside the appliance on the left. The mains cable may only be changed by a qualified electrician or competent person. If your appliance needs repairing, please contact your local Customer Care Department.
Prior to Initial Start–Up ☞ Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”). Starting up and temperature regulation Important! Only use the appliance when built–in! The temperature regulator is in the refrigerator compartment on the upper right. It is also the ON/OFF-switch. Position „0“ = Refrigeration off Position „1“ = Warmest interior temperature Position „6“ = Coldest interior temperature 1.
Starting up and temperature regulation Recommended settings: Examples: Ambient temperature Temperature controller position Approx. 10°C Range up to 1 Approx. 16°C Range about 2 Approx. 25°C Range about 2 Approx. 32°C 2 to 3 Approx. 38°C 1 to 2 3. If you want a higher or lower temperature, turn the temperature regulator to a warmer or cooler setting respectively. Important! High ambient temperatures (e.g.
Interior Accessories Storage shelves Various glass storage shelves are included with your appliance. The height of the storage shelves can be adjusted: 1. To do this pull the storage shelf forward until it can be swivelled upwards or downwards and removed. 2. Please do the same in reverse to insert the shelf at a different height. ☞ ☞ Adjustment for tall goods (not for all models): Slide the front half of the Vario storage shelf in another level to the rear.
Correct storage For physical reasons, there are different temperature regions in the fridge. The coldest region is on the lowest storage shelf. Warmer regions are the top storage shelf, the vegetable drawer and the storage compartments on the door. The arrangement example shows at which places in the refrigerator suitable temperatures for various types of foods exist. Tip: Food in the fridge should always be covered or packaged, to prevent drying and tainting of other food.
Cleaning and Care For hygienic reasons the appliance interior, including interior accessories, should be cleaned regularly. Warning! • The appliance may not be connected to the mains during cleaning. Danger of electrical shock! Before cleaning switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse. • Never clean the appliance with a steam cleaner.
Energy Saving Tips • Do not install the appliance near boilers, radiators or other sources of heat. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings. • Do not place warm foods into the appliance. Allow warm foods to cool first. • Only leave door open as long as necessary. • Do not set temperature any colder than necessary.
What to do if ... Symptom Possible Cause Remedy Please look in the “Starting Temperature is not properup and temperature reguly adjusted. lation” section. The food is too warm. Interior lighting does not work. Heavy build up of frost, possibly also on the door seal. The compressor does not start immediately after changing the temperature setting. Water on the floor or on storage shelves. Door was open for an extended period.
3. To change the light bulb, undo the cross head screw and remove the light bulb cover. 4. Change the defective light bulb. 5. Refit the light bulb cover and the cross head screw. 6. Put the refrigerator back into operation. AEG65 Customer Service If you cannot find the remedy for a malfunction in these operating instructions, please contact your dealer or our customer service department.
Regulations, Standards, Guidelines This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), accident prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance. The refrigerant circuit has been checked for leaks.
AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg © Copyright by AEG 2222 754-42 -00- 0205 Änderungen vorbehalten Subject to change without notice
