User manual

Selecting the programme

Use the programme selector to set the programme

you require. The estimated time to end of the pro-

gramme appears in the LCD in h:mm format

(hours:minutes).

During the cycle time elapses by steps of one mi-

nute; less than 1 hour the leading zeros are not

shown (ex. “59”, “5”, “0”).

Setting dryness level

If laundry comes out of the machine too damp

after a standard drying programme, you can in-

crease the drying result by using the DRYNESS

function. Laundry becomes drier as you move

from MIN to MAX.

Press the DRYNESS button repeatedly until the

desired dryness level (MIN, MED or MAX) is shown

in the display. When humidity adjustment is not

foreseen on the related program, bar frame with

AUTO text is shown.

Setting the spin speed

If the washing in the washing machine was ini-

tially drained prior to the drying cycle, the dryer

can be set according to the spin speed of the initial

drainage procedure. The higher the spin speed

was, the shorter the programme length for the

drying cycle.

Press the RPM button a number of times until the

desired spin speed of the initial drainage is dis-

played. No value is shown if no spin speed is se-

lected.

In certain programmes the spin speed has no ef-

fect (time controlled cycles), its selection is not

possible and only three dashes are visualized.

Available selections:

Daily use