User manual

2. Press the DELAY button as many times as

necessary until the required start delay

appears on the display, e.g. 12h if the pro-

gramme is to be started in 12 hours.

If the display is showing 20h and you

press the button again, the time delay will

be cancelled. The display will show 0'and

then the duration of the selected programme.

3. To activate the delay timer, press the START PAUSE button. The amount of time re-

maining until the programme is set to start is continuously displayed (e.g. 15h, 14h,

13h, … 30' etc).

Setting child lock

The child lock can be set to prevent a programme being accidentally started or a programme

in operation being accidentally changed. The child lock function locks all buttons and the

programme knob. The child lock can be activated or deactivated by holding down the

OPTION and OK buttons simultaneously for 5 seconds.

– Before programme is started: Appliance cannot be used

– After programme is started: Programme in operation cannot be changed

The

icon appears in the display to indicate that the child safety device is activated.

The child safety device is not deactivated once the programme comes to an end.

If you want to set a new programme, you must first deactivate the child safety device.

Starting the programme

Press the START PAUSE button. The programme is

started.

The programme progress is shown in LCD by ap-

propriate set of icons. From left to the right, from

IRON DRY

to ANTI-CREASE icon depends on

the drying cycle chosen. E. g. in case of STORAGE

programme the following status icons are visible:

. Current cycle progress is marked

by flashing dash under status icon. When appro-

priate part of drying cycle is accomplished dash

becomes steady and appears flashing under next status icon.

Changing programme

To change a programme which has been selected by mistake once the programme has

started, first turn the programme selector to OFF and then reset the programme.

The programme can no longer be changed directly once the programme has started.

Putting in extra items or taking items out before end of programme

1. Open loading door.

Daily use