User manual

3. Remove foil hose and polystyrene pad-

ding from the machine.

Drying rack unpacking

CAUTION!

Before use all packaging parts and rack must be removed from the drum

To unpack the rack:

1. Remove upper protection polystyrene

parts by pulling them.

2. Remove the elastic band fixing the rack

handle to container.

3. Pull slightly rack handle (not to the end).

Grasp at it harder and lift it up.

For easiest unpacking turn the rack

upside down

4. Take it carefully out of the drum.

5. Remove from the drum rest of packing

elements.

Electrical connection

Details on mains voltage, type of current and the fuses required should be taken from the

rating plate. The rating plate is fitted near the loading aperture (see “Product description”

chapter).

Connect the machine to an earthed socket, in accordance with current wiring regulations.

Installation