User manual

Daily use

Switching machine on / switching light on

Turn the programme selector to any programme or turn it to DRUM LIGHT. The machine

has been switched on. When the loading door is opened, the drum is illuminated.

Opening loading door / loading laundry

1. Open loading door:

Push against the loading door (push

point)

2. Load your laundry (do not force it in).

CAUTION!

Do not jam laundry in between the loading

door and rubber seal.

3. Close loading door securely. Lock must

audibly lock.

Selecting the programme

Use the programme selector to set the programme

you require. The estimated time to end of the pro-

gramme appears in the LCD in h:mm format

(hours:minutes).

During the cycle time elapses by steps of one mi-

nute; less than 1 hour the leading zeros are not

shown (ex. “59”, “5”, “0”).

Setting dryness level

If laundry comes out of the machine too damp

after a standard drying programme, you can in-

crease the drying result by using the DRYNESS

function. Laundry becomes drier as you move

from MIN to MAX .

Daily use