User manual

Press the DRYNESS button repeatedly until the
desired dryness level ( MIN , MED or MAX ) is
shown in the display. When humidity adjustment
is not foreseen on the related program, bar frame
with AUTO text is shown.
Setting the spin speed
If the washing in the washing machine was ini-
tially drained prior to the drying cycle, the dryer
can be set according to the spin speed of the initial
drainage procedure. The higher the spin speed
was, the shorter the programme length for the
drying cycle.
Press the RPM button a number of times until the
desired spin speed of the initial drainage is dis-
played. No value is shown if no spin speed is se-
lected.
In certain programmes the spin speed has no ef-
fect (time controlled cycles), its selection is not
possible and only three dashes are visualized.
Available selections:
Selecting additional options
The additional options available for the drying programmes are DELICATE, LONG ANTI-
CREASE, SENSITIVE and BUZZER
1. By turning the knob choose a drying programme.
2. To set the option press OPTION button. You will see available options shown as icons
on the screen:
DELICATE LONG ANTI-CREASE SENSITIVE BUZZER
DELICATE icon flashes. Flashing icon means: selected but not active. To activate
selected OPTION press OK button. Activated option is visible as flashing icon with dash
beneath.
3. Press alternately OPTION button to select appropriate options and OK button to activate
it. Active options are always on as icons with dash beneath.
4. Option selection mode is finished when you go trough all of them or you stop selecting.
Only activated option icons are on.
Some options cannot be selected together as DELICATE and SENSITIVE. Some of them are
not selectable with certain programmes
To deselect an option follow the same steps. Option icon should disappear.
Daily use
13