User manual

TIME
To select the programme duration after setting the TIME programme. You can select a
programme duration from 10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME programme. The blinking 10' above TIME button
is on. (corresponding to the cooling phase).
2. Press the TIME button repeatedly until the
desired programme duration is shown in
the display, e.g. 20 for a programme of 20
minutes.
If the programme duration is not selected, the
duration is automatically set to 10 mins.
Setting delay timer
With the DELAY button, you can delay the start of a programme by between 30
minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions.
2. Press the DELAY button as many times as
necessary until the required start delay
appears on the display, e.g. 12h if the pro-
gramme is to be started in 12 hours.
If the display is showing 20h and you
press the button again, the time delay will
be cancelled. The display will show 0'and
then the duration of the selected programme.
3. To activate the delay timer, press the START PAUSE button. The amount of time re-
maining until the programme is set to start is continuously displayed (e.g. 15h, 14h,
13h, … 30' etc).
Setting child lock
The child lock can be set to prevent a programme being accidentally started or a programme
in operation being accidentally changed. The child lock function locks all buttons and the
programme knob. The child lock can be activated or deactivated by holding down the
OPTION and OK buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The
icon appears in the display to indicate that the child safety device is activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Daily use
15