User manual

6.
Insert the fluff filter into the base a . Insert
the second fluff filter into the filter hous-
ing (it has to audibly lock) and slide it in-
side the filter chamber b . Close the door
in plinth. Note: If the fluff filter is not in-
serted in the filter housing, the filter hous-
ing cannot be slide into the appliance
base.
7. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber gloves.
Tip: The fluff can be removed more easily if it
is first dampened (e. g. with a laundry damp-
ener) or with the help of vacuum cleaner.
Cleaning the drum
CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside of the
drum. The degree to which the laundry has been dried is then no longer detected reliably.
The laundry is damper than expected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of
the drum and drum ribs.
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause Remedy
Dryer does not
work.
Dryer not connected to mains supply.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Loading door opened. Close loading door
The START PAUSE button not pressed. Press the START PAUSE button.
Unsatisfacto-
ry drying re-
sults.
Incorrect programme set.
Set suitable programme.
2)
Fluff filters clogged.
Clean fluff filters.
3)
ab
What to do if ...
101