User manual

1.
Turn the programme dial to availa-
ble programme.
2.
Push at the same time the Dry Plus
and Buzzer buttons and hold down
until you see the correct setting:
– the LED is off and the symbol
goes into the view - The
LED is permanently off
– the LED is on and the symbol
goes into the view - The
LED is activated
9. CARE AND CLEANING
9.1 Cleaning the filter
At the end of each cycle the filter LED is
on to tell you that the filter must be
cleaned.
The filter collects the fluff. The
fluff occurs while the cloths are
dried in the tumble dryer.
To clean the filter:
1.
Open the door.
2.
Pull the filter.
3.
Open the filter.
4.
Use a moist hand to clean the filter.
14
www.aeg.com