User manual

2. Lift slightly rack and take it carefully out
from the drum.
3. Remove right polystyrene part by pulling
it.
4. Remove left polystyrene part by pulling it.
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the
rating plate. The rating plate is fitted near the loading aperture (see “Product description”
chapter).
Connect the machine to an earthed socket, in accordance with current wiring regulations.
WARNING!
The manufacturer declines any responsibility for damage or injury through failure
to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be carried
out by our Service Centre.
The appliance is supplied with a 13 amp plug fitted. In the event of having to change the
fuse in the plug supplied, a 13 amp ASTA approved BS 1363/A fuse must be used.
40
Installation