User's Manual

---------------------------------------------------------------26/51---------------------------------------
6.7 Mirror Code
This function allows to mirror the transpondercode byte by byte. It is done in the
reading routine. That means that the code is stored in the database in the same
format as it is shown on the display or is sent via the interface. One transponder
with “Mirror Code” on/off is treated like two different transpondercodes.
Example: -“Mirror Code” off: 12345678
-“Mirror Code” on: 78563412
6.8 Erase memory
This function allows deleting all records in the internal database of the ARE H9
HF. For safety reasons this function is activated only when both arrow buttons
are pressed simultaneously.
Erase DB-Memory
DB erased !
Erase DB-Memory
erasing...
Erase DB-Memory
Confirm ?
--- No Tag ---
~15
seconds
The erasing of the database memory can take several seconds.
! Do not disconnect the ARE H9 HF from the power supply during this
erase operation; this could lead to damaging the database function of the
reader.