User's Manual

--------------------------------------------------------------------------------17/48--------------------------------------------------------------------------------
5.2 Instructions for the hardware settings
5.2.1 BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format: BD <SP> parameter <CR>
Output (example): 2 <CR>
Parameter:
PARAMETER FUNCTION
0 4800 baud
1 9600 baud
2 19200 baud
3 38400 baud
4 57600 baud
5 115200 baud
5.2.2 RE – read EEPROM
You can read out the internal EEPROM with the RE command.
Input format: RE <SP> parameter <CR>
Output (example): FF <CR>
Parameter:
PARAMETER FUNCTION
0000h..079Fh address
5.2.3 RF – radio frequency
With the command RF you can switch the antenna field on and off.
Input format: RF <SP> parameter <CR>