User's Manual

ManualsBrandsAEG Identifikationssysteme ManualsElectronicsRFID Reader

--------------------------------------------------------------------------------20/48--------------------------------------------------------------------------------

5.3 Instructions for reading settings

5.3.1 CE – convert error code

With CE=1 the reader sends no error codes, except the no read error, during the md0 mode or the

commands Get Tag. The leds are not influenced by this command. This command has only effect in

the ISO 14443A standard.

This command is not available in profibus communication and can not be saved with the VSAVE

command.

Input format: CE <SP> parameter <CR>

Output (example): 0 <CR>

Parameter:

PARAMETER FUNCTION

0 No suppression

1 Suppression of error codes

5.3.2 CID – suppression of ID Codes

In the MD0 mode with CID=1 only the first of in succession identical transponder numbers is output

on the serial interface. The possibly following identical transponder numbers are suppressed, as long

as no new valid transponder number is received, processed and output. The get tag command is not

influenced by this command. NoReads do not influence the data filtering.