User's Manual

Rev 09
--------------------------------------------------------------------------------9/27--------------------------------------------------------------------------------
3.2 Instructions for the hardware settings
3.2.1 BD – baudrate
The command BD enables the change of the baud rate. The settings are directly effective.
Input format: BD <SP> parameter <CR>
Output (example): 2 <CR>
Parameter:
3.2.2 EC – Echo
The EC command allows to change the echo function.
Input format: EC <SP> parameter <CR>
Parameter:
PARAMETER FUNCTION
0 Echo off
1 Echo on
Output (example): 0 <CR>
PARAMETER FUNCTION
0 4800 baud
1 9600 baud
2 19200 baud
3 38400 baud